[Wed Oct  5 04:43:54 2011] Detection parameters:
  Position = (284.5, 603.2) = 21 54 47.70 62 31 54.5
  Extent = 2.2" x 1.3", rotation angle = 99 degrees
  Source counts = 104.6 +/- 10.5
  Background counts = 6.4
  Rate = 0.007 +/- 0.0007

[Wed Oct  5 04:43:56 2011] Off-axis axis estimate = 7.61'
[Wed Oct  5 04:45:16 2011] Using EEF radius (= 2.56 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 04:45:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 04:45:16 2011] Initial guess for spatial extent in simple fitting = 2.56"
[Wed Oct  5 04:45:16 2011] source mask rpix=5.2, npix_max = 130, mask sum = 120, frac = 0.919
[Wed Oct  5 04:45:16 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.56"
[Wed Oct  5 04:45:18 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct  5 04:45:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10820_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 04:45:18 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct  5 04:45:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10820_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 04:45:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10820_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10820_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 04:45:18 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 04:45:18 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 04:45:18 2011] Fit fullrun_ccd2_acisf10820_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 04:45:35 2011] Spatial fit model total counts = 142.090000, observed total counts = 136.000000
[Wed Oct  5 04:45:35 2011] Offset between fit and detection position for source 1 = 0.766641 pixels
[Wed Oct  5 04:45:35 2011] 142.789300 total counts/ 20.999300 bgd. counts: snr = 26.577200
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.766641 pixels
  Position = (283.9, 603.7) = 21 54 47.78 62 31 54.5
  Extent = 2.2 (2.0-2.6)", rotation angle = 0
  Source counts = 121.8 +/- 11.9
  Background counts = 21.0
  Rate = 0.008 +/- 0.0008
[Wed Oct  5 04:45:35 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 04:45:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 04:45:35 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 04:45:35 2011] Source does appear to be extended
[Wed Oct  5 04:45:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 04:46:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 04:46:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 04:46:37 2011] Initial guess for spatial extent in simple fitting = 2.22"
[Wed Oct  5 04:46:37 2011] source mask rpix=4.5, npix_max = 100, mask sum = 90, frac = 0.893
[Wed Oct  5 04:46:37 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.22"
[Wed Oct  5 04:46:37 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct  5 04:46:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10820_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 04:46:37 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct  5 04:46:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10820_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 04:46:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10820_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10820_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 04:46:38 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 04:46:38 2011] fullrun_ccd2_acisf10820_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 04:46:38 2011] Fit fullrun_ccd2_acisf10820_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 04:47:05 2011] Spatial fit model total counts = 133.988000, observed total counts = 127.000000
[Wed Oct  5 04:47:05 2011] Offset between fit and detection position for source 1 = 0.136598 pixels
[Wed Oct  5 04:47:05 2011] 134.351950 total counts/ 9.050950 bgd. counts: snr = 41.649276
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.136598 pixels
  Position = (283.8, 603.8) = 21 54 47.78 62 31 54.6
  Extent = 2.3 (2.0-2.6)", rotation angle = 0
  Source counts = 125.3 +/- 11.6
  Background counts = 9.1
  Rate = 0.008 +/- 0.0007
[Wed Oct  5 04:47:05 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 04:47:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 04:47:05 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 04:47:05 2011] Source does appear to be extended
[Wed Oct  5 04:47:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 05:37:25 2011] Not overwriting source region fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1_src.reg
[Wed Oct  5 05:37:25 2011] Extracting stamp from image fullrun_ccd2_acisf10820_pi14-548_cl_sm2.00.img.gz, (180, 500) - (388, 708)
[Wed Oct  5 05:37:25 2011] Writing fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1.gif
[Wed Oct  5 05:37:35 2011] ../../acisf10820/products/events/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1_src.evt and ../../acisf10820/products/events/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct  5 05:37:35 2011] Size of ../../acisf10820/products/events/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1_src.evt.gz[events] = 127 counts
[Wed Oct  5 05:37:35 2011] Mean chipx,y = (814.62, 494.77)
[Wed Oct  5 05:37:35 2011] Mean tdetx,y = (3555.77, 3271.38)
[Wed Oct  5 05:37:35 2011] chipx,y range = (785.00-839.00, 465.00-523.00)
[Wed Oct  5 05:37:35 2011] Size of ../../acisf10820/products/events/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 66 counts
[Wed Oct  5 05:37:35 2011] ../../acisf10820/products/images/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1_src.img and ../../acisf10820/products/images/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct  5 05:37:35 2011] ../../acisf10820/products/spectra/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1_src.pi and ../../acisf10820/products/spectra/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct  5 05:38:24 2011] ../../acisf10820/products/lightcurves/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1_src.lc and ../../acisf10820/products/lightcurves/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct  5 05:45:38 2011] Keeping rmf generated by specextract
[Wed Oct  5 05:45:38 2011] 162.599
[Wed Oct  5 05:51:50 2011] Updating aperture counts using extracted products
[Wed Oct  5 05:51:50 2011] Error reading totcts from fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct  5 05:51:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 05:51:51 2011] Using photon index=1.80, rate=0.00796, arf fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1.arf
[Wed Oct  5 05:51:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 05:51:51 2011] Updating source flux to 1.2e-13
[Wed Oct  5 05:52:17 2011] Reading fit data from acisf10820/analysis//spectral/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct  5 05:52:17 2011] Spectral fit parameter nH value = 1.58422e+20
[Wed Oct  5 05:52:17 2011] Spectral fit parameter PhoIndex value = 0.77368
[Wed Oct  5 05:52:17 2011] Failed to get F(0.3-8.0) from acisf10820/analysis//spectral/fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 05:52:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 05:52:17 2011] Using Nh = 1.6e+20, photon index=0.77, rate=0.00796, arf fullrun_ccd2_acisf10820_pi14-548_pass1_cl_src1.arf
[Wed Oct  5 05:52:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 05:52:17 2011] Updating source flux to 1.7e-13