[Thu Oct 27 22:29:59 2011] Detection parameters:
  Position = (286.1, 604.5) = 21 54 47.74 62 31 55.2
  Extent = 2.3" x 1.3", rotation angle = 111 degrees
  Source counts = 56.3 +/- 7.8
  Background counts = 4.7
  Rate = 0.004 +/- 0.0005

[Thu Oct 27 22:30:00 2011] Off-axis axis estimate = 7.61'
[Thu Oct 27 22:30:49 2011] Using EEF radius (= 2.56 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 22:30:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 22:30:49 2011] Initial guess for spatial extent in simple fitting = 2.56"
[Thu Oct 27 22:30:49 2011] source mask rpix=5.2, npix_max = 130, mask sum = 121, frac = 0.928
[Thu Oct 27 22:30:49 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.56"
[Thu Oct 27 22:30:49 2011] fullrun_ccd2_acisf10819_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 27 22:30:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10819_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 22:30:49 2011] fullrun_ccd2_acisf10819_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 27 22:30:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10819_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 22:30:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10819_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10819_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 22:30:49 2011] fullrun_ccd2_acisf10819_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 27 22:30:49 2011] fullrun_ccd2_acisf10819_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 27 22:30:49 2011] Fit fullrun_ccd2_acisf10819_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 27 22:30:58 2011] Spatial fit model total counts = 74.044100, observed total counts = 71.000000
[Thu Oct 27 22:30:58 2011] Offset between fit and detection position for source 9 = 0.380324 pixels
[Thu Oct 27 22:30:58 2011] 74.688900 total counts/ 18.354000 bgd. counts: snr = 13.149589
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.380324 pixels
  Position = (285.7, 604.4) = 21 54 47.80 62 31 54.8
  Extent = 2.0 (1.5-2.6)", rotation angle = 0
  Source counts = 56.3 +/- 8.6
  Background counts = 18.4
  Rate = 0.004 +/- 0.0006
[Thu Oct 27 22:30:58 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 22:30:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 22:30:58 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 22:30:58 2011] Source does appear to be extended
[Thu Oct 27 22:30:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 22:31:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 22:31:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 22:31:19 2011] Initial guess for spatial extent in simple fitting = 1.96"
[Thu Oct 27 22:31:19 2011] source mask rpix=4.0, npix_max = 80, mask sum = 72, frac = 0.899
[Thu Oct 27 22:31:19 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.96"
[Thu Oct 27 22:31:20 2011] fullrun_ccd2_acisf10819_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 27 22:31:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10819_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 22:31:20 2011] fullrun_ccd2_acisf10819_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 27 22:31:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10819_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 22:31:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10819_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10819_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 22:31:20 2011] fullrun_ccd2_acisf10819_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 27 22:31:20 2011] fullrun_ccd2_acisf10819_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 27 22:31:20 2011] Fit fullrun_ccd2_acisf10819_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 27 22:31:28 2011] Spatial fit model total counts = 69.910400, observed total counts = 67.000000
[Thu Oct 27 22:31:28 2011] Offset between fit and detection position for source 9 = 0.220334 pixels
[Thu Oct 27 22:31:28 2011] 70.812600 total counts/ 24.086500 bgd. counts: snr = 9.520783
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.220334 pixels
  Position = (285.6, 604.2) = 21 54 47.81 62 31 54.7
  Extent = 1.6 (1.2-2.2)", rotation angle = 0
  Source counts = 46.7 +/- 8.4
  Background counts = 24.1
  Rate = 0.003 +/- 0.0006
[Thu Oct 27 22:31:28 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 22:31:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 22:31:28 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 22:31:28 2011] Source does appear to be extended
[Thu Oct 27 22:31:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 22:33:39 2011] Not overwriting source region fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9_src.reg
[Thu Oct 27 22:33:39 2011] Extracting stamp from image fullrun_ccd2_acisf10819_pi14-548_cl_sm2.00.img.gz, (214, 533) - (357, 675)
[Thu Oct 27 22:33:39 2011] Writing fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9.gif
[Thu Oct 27 22:33:41 2011] ../../acisf10819/products/events/fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9_src.evt and ../../acisf10819/products/events/fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Thu Oct 27 22:33:41 2011] Size of ../../acisf10819/products/events/fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9_src.evt.gz[events] = 57 counts
[Thu Oct 27 22:33:41 2011] Mean chipx,y = (813.00, 496.60)
[Thu Oct 27 22:33:41 2011] Mean tdetx,y = (3557.60, 3273.00)
[Thu Oct 27 22:33:41 2011] chipx,y range = (792.00-832.00, 473.00-518.00)
[Thu Oct 27 22:33:41 2011] Size of ../../acisf10819/products/events/fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 30 counts
[Thu Oct 27 22:33:41 2011] ../../acisf10819/products/images/fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9_src.img and ../../acisf10819/products/images/fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Thu Oct 27 22:33:41 2011] ../../acisf10819/products/spectra/fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9_src.pi and ../../acisf10819/products/spectra/fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Thu Oct 27 22:33:41 2011] Not generating rmf since there are only 46 counts
[Thu Oct 27 22:33:43 2011] ../../acisf10819/products/lightcurves/fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9_src.lc and ../../acisf10819/products/lightcurves/fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Thu Oct 27 22:34:29 2011] 162.978
[Thu Oct 27 22:35:40 2011] Updating aperture counts using extracted products
[Thu Oct 27 22:35:40 2011] Error reading totcts from fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9_src.pi.gz
[Thu Oct 27 22:35:41 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 22:35:41 2011] Using photon index=1.80, rate=0.00317, arf fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9.arf
[Thu Oct 27 22:35:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 22:35:41 2011] Updating source flux to 4.6e-14
[Thu Oct 27 22:35:46 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 27 22:35:47 2011] acisf10819/analysis//spectral/fullrun_ccd2_acisf10819_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete