[Mon Oct 24 01:53:46 2011] Detection parameters:
  Position = (274.0, 607.8) = 21 54 47.80 62 31 54.7
  Extent = 2.4" x 1.7", rotation angle = 107 degrees
  Source counts = 116.5 +/- 11.3
  Background counts = 11.5
  Rate = 0.006 +/- 0.0005

[Mon Oct 24 01:53:48 2011] Off-axis axis estimate = 7.62'
[Mon Oct 24 01:54:54 2011] Using EEF radius (= 2.57 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 01:54:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 01:54:54 2011] Initial guess for spatial extent in simple fitting = 2.57"
[Mon Oct 24 01:54:54 2011] source mask rpix=5.2, npix_max = 131, mask sum = 132, frac = 1.007
[Mon Oct 24 01:54:54 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.57"
[Mon Oct 24 01:54:55 2011] fullrun_ccd2_acisf10818_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 01:54:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10818_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 01:54:55 2011] fullrun_ccd2_acisf10818_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 01:54:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10818_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 01:54:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10818_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10818_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 01:54:55 2011] fullrun_ccd2_acisf10818_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 01:54:55 2011] fullrun_ccd2_acisf10818_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 01:54:55 2011] Fit fullrun_ccd2_acisf10818_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 01:55:10 2011] Spatial fit model total counts = 140.114000, observed total counts = 143.000000
[Mon Oct 24 01:55:10 2011] Offset between fit and detection position for source 1 = 0.550826 pixels
[Mon Oct 24 01:55:10 2011] 140.659200 total counts/ 16.204200 bgd. counts: snr = 30.917086
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.550826 pixels
  Position = (274.0, 608.4) = 21 54 47.83 62 31 54.7
  Extent = 2.5 (2.1-2.8)", rotation angle = 0
  Source counts = 124.5 +/- 11.9
  Background counts = 16.2
  Rate = 0.006 +/- 0.0006
[Mon Oct 24 01:55:10 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 01:55:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 01:55:10 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 01:55:10 2011] Source does appear to be extended
[Mon Oct 24 01:55:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 01:55:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 01:55:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 01:55:42 2011] Initial guess for spatial extent in simple fitting = 2.45"
[Mon Oct 24 01:55:42 2011] source mask rpix=5.0, npix_max = 120, mask sum = 110, frac = 0.916
[Mon Oct 24 01:55:42 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.45"
[Mon Oct 24 01:55:43 2011] fullrun_ccd2_acisf10818_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 01:55:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10818_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 01:55:43 2011] fullrun_ccd2_acisf10818_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 01:55:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10818_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 01:55:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10818_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10818_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 01:55:46 2011] fullrun_ccd2_acisf10818_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 01:55:46 2011] fullrun_ccd2_acisf10818_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 01:55:46 2011] Fit fullrun_ccd2_acisf10818_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 01:56:02 2011] Spatial fit model total counts = 138.876000, observed total counts = 142.000000
[Mon Oct 24 01:56:02 2011] Offset between fit and detection position for source 1 = 0.055522 pixels
[Mon Oct 24 01:56:02 2011] 139.361300 total counts/ 15.414300 bgd. counts: snr = 31.569966
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.055522 pixels
  Position = (274.1, 608.3) = 21 54 47.83 62 31 54.7
  Extent = 2.4 (2.0-2.5)", rotation angle = 0
  Source counts = 123.9 +/- 11.8
  Background counts = 15.4
  Rate = 0.006 +/- 0.0006
[Mon Oct 24 01:56:02 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 01:56:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 01:56:02 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 01:56:02 2011] Source does appear to be extended
[Mon Oct 24 01:56:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 01:58:42 2011] Not overwriting source region fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 24 01:58:42 2011] Extracting stamp from image fullrun_ccd2_acisf10818_pi14-548_cl_sm2.00.img.gz, (162, 496) - (386, 720)
[Mon Oct 24 01:58:42 2011] Writing fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1.gif
[Mon Oct 24 01:58:44 2011] ../../acisf10818/products/events/fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1_src.evt and ../../acisf10818/products/events/fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 24 01:58:44 2011] Size of ../../acisf10818/products/events/fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1_src.evt.gz[events] = 140 counts
[Mon Oct 24 01:58:44 2011] Mean chipx,y = (813.35, 495.34)
[Mon Oct 24 01:58:44 2011] Mean tdetx,y = (3556.34, 3272.65)
[Mon Oct 24 01:58:44 2011] chipx,y range = (782.00-841.00, 466.00-520.00)
[Mon Oct 24 01:58:44 2011] Size of ../../acisf10818/products/events/fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 103 counts
[Mon Oct 24 01:58:44 2011] ../../acisf10818/products/images/fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1_src.img and ../../acisf10818/products/images/fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 24 01:58:44 2011] ../../acisf10818/products/spectra/fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1_src.pi and ../../acisf10818/products/spectra/fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 24 01:58:47 2011] ../../acisf10818/products/lightcurves/fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1_src.lc and ../../acisf10818/products/lightcurves/fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 24 02:00:18 2011] Keeping rmf generated by specextract
[Mon Oct 24 02:00:18 2011] 162.73
[Mon Oct 24 02:02:03 2011] Updating aperture counts using extracted products
[Mon Oct 24 02:02:03 2011] Error reading totcts from fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 24 02:02:03 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 02:02:03 2011] Using photon index=1.80, rate=0.00599, arf fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1.arf
[Mon Oct 24 02:02:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 02:02:03 2011] Updating source flux to 8.7e-14
[Mon Oct 24 02:02:20 2011] Reading fit data from acisf10818/analysis//spectral/fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 24 02:02:20 2011] Spectral fit parameter nH value = 3.26236e+14
[Mon Oct 24 02:02:20 2011] Spectral fit parameter PhoIndex value = 1.03412
[Mon Oct 24 02:02:20 2011] Failed to get F(0.3-8.0) from acisf10818/analysis//spectral/fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 24 02:02:20 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 02:02:20 2011] Using Nh = 3.3e+14, photon index=1.03, rate=0.00599, arf fullrun_ccd2_acisf10818_pi14-548_pass1_cl_src1.arf
[Mon Oct 24 02:02:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 02:02:20 2011] Updating source flux to 1.1e-13