[Mon Oct 24 01:53:41 2011] Detection parameters:
  Position = (1048.4, 882.9) = 21 52 39.80 62 32 54.4
  Extent = 2.3" x 1.9", rotation angle = 7 degrees
  Source counts = 11.0 +/- 3.9
  Background counts = 4.0
  Rate = 0.0005 +/- 0.0002

[Mon Oct 24 01:53:43 2011] Off-axis axis estimate = 8.49'
[Mon Oct 24 01:54:48 2011] Using EEF radius (= 3.18 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 01:54:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 01:54:48 2011] Initial guess for spatial extent in simple fitting = 3.18"
[Mon Oct 24 01:54:48 2011] source mask rpix=6.5, npix_max = 194, mask sum = 182, frac = 0.937
[Mon Oct 24 01:54:48 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 3.18"
[Mon Oct 24 01:54:49 2011] fullrun_ccd0_acisf10818_pi14-548_cl_pass0_src2.ximg exists
[Mon Oct 24 01:54:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10818_pi14-548_cl_pass0_src2.csv
[Mon Oct 24 01:54:49 2011] fullrun_ccd0_acisf10818_pi14-548_cl_pass0_src2_1.ximg exists
[Mon Oct 24 01:54:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10818_pi14-548_cl_pass0_src2.csv
[Mon Oct 24 01:54:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10818_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10818_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 01:54:49 2011] fullrun_ccd0_acisf10818_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Mon Oct 24 01:54:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10818_pi14-548_cl_pass0_tfrozen_src2.csv
[Mon Oct 24 01:54:50 2011] fullrun_ccd0_acisf10818_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Oct 24 01:54:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10818_pi14-548_cl_pass0_tfrozen_src2.csv
[Mon Oct 24 01:54:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10818_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10818_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 01:55:06 2011] Spatial fit model total counts = 28.634600, observed total counts = 25.000000
[Mon Oct 24 01:55:06 2011] Offset between fit and detection position for source 2 = 3.679158 pixels
[Mon Oct 24 01:55:06 2011] 28.713070 total counts/ 21.769700 bgd. counts: snr = 1.488141
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.679158 pixels
  Position = (1051.6, 881.0) = 21 52 39.61 62 32 53.2
  Extent = 0.8" x 0.8", rotation angle = 0
  Source counts = 6.9 +/- 5.4
  Background counts = 21.8
  Rate = 0.0003 +/- 0.0003
  Deleting source due to low Poisson probability