[Fri Oct  7 17:53:47 2011] Detection parameters:
  Position = (644.9, 289.8) = 22 52 51.02 62 30 43.5
  Extent = 1.0" x 0.6", rotation angle = 79 degrees
  Source counts = 51.7 +/- 7.5
  Background counts = 4.3
  Rate = 0.002 +/- 0.0003

[Fri Oct  7 17:53:47 2011] Off-axis axis estimate = 7.14'
[Fri Oct  7 17:55:07 2011] Using EEF radius (= 2.26 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:55:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 17:55:07 2011] Initial guess for spatial extent in simple fitting = 2.26"
[Fri Oct  7 17:55:07 2011] source mask rpix=4.6, npix_max = 103, mask sum = 100, frac = 0.962
[Fri Oct  7 17:55:07 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 2.26"
[Fri Oct  7 17:55:08 2011] fullrun_ccd3_acisf10812_pi14-548_cl_pass0_src4.ximg exists
[Fri Oct  7 17:55:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10812_pi14-548_cl_pass0_src4.csv
[Fri Oct  7 17:55:08 2011] fullrun_ccd3_acisf10812_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Oct  7 17:55:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10812_pi14-548_cl_pass0_src4.csv
[Fri Oct  7 17:55:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10812_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10812_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:55:08 2011] fullrun_ccd3_acisf10812_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Oct  7 17:55:09 2011] fullrun_ccd3_acisf10812_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Oct  7 17:55:09 2011] Fit fullrun_ccd3_acisf10812_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Oct  7 17:55:39 2011] Spatial fit model total counts = 57.058000, observed total counts = 58.000000
[Fri Oct  7 17:55:39 2011] Offset between fit and detection position for source 44 = 0.814485 pixels
[Fri Oct  7 17:55:39 2011] 56.886600 total counts/ 20.957900 bgd. counts: snr = 7.848156
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.814485 pixels
  Position = (645.3, 290.5) = 22 52 51.02 62 30 43.6
  Extent = 1.1 (0.8-1.4)", rotation angle = 0
  Source counts = 35.9 +/- 7.5
  Background counts = 21.0
  Rate = 0.001 +/- 0.0003
[Fri Oct  7 17:55:39 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:55:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:55:39 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:55:39 2011] Source does appear to be extended
[Fri Oct  7 17:55:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 17:56:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:56:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 17:56:24 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Fri Oct  7 17:56:24 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.888
[Fri Oct  7 17:56:24 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 1.06"
[Fri Oct  7 17:56:25 2011] fullrun_ccd3_acisf10812_pi14-548_cl_pass1_src4.ximg exists
[Fri Oct  7 17:56:25 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10812_pi14-548_cl_pass1_src4.csv
[Fri Oct  7 17:56:25 2011] fullrun_ccd3_acisf10812_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Oct  7 17:56:25 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10812_pi14-548_cl_pass1_src4.csv
[Fri Oct  7 17:56:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10812_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10812_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:56:26 2011] fullrun_ccd3_acisf10812_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Oct  7 17:56:26 2011] fullrun_ccd3_acisf10812_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Oct  7 17:56:26 2011] Fit fullrun_ccd3_acisf10812_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Oct  7 17:56:53 2011] Spatial fit model total counts = 44.855700, observed total counts = 45.000000
[Fri Oct  7 17:56:53 2011] Offset between fit and detection position for source 44 = 0.317746 pixels
[Fri Oct  7 17:56:53 2011] 44.200620 total counts/ 8.304820 bgd. counts: snr = 12.455998
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.317746 pixels
  Position = (645.4, 290.8) = 22 52 51.02 62 30 43.7
  Extent = 1.1 (0.8-1.5)", rotation angle = 0
  Source counts = 35.9 +/- 6.6
  Background counts = 8.3
  Rate = 0.001 +/- 0.0003
[Fri Oct  7 17:56:53 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:56:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:56:53 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:56:53 2011] Source does appear to be extended
[Fri Oct  7 17:56:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 18:07:28 2011] Not overwriting source region fullrun_ccd3_acisf10812_pi14-548_pass1_cl_src44_src.reg
[Fri Oct  7 18:07:28 2011] Extracting stamp from image fullrun_ccd3_acisf10812_pi14-548_cl_sm2.00.img.gz, (597, 242) - (694, 340)
[Fri Oct  7 18:07:28 2011] Writing fullrun_ccd3_acisf10812_pi14-548_pass1_cl_src44.gif
[Fri Oct  7 18:07:43 2011] ../../acisf10812/products/events/fullrun_ccd3_acisf10812_pi14-548_pass1_cl_src44_src.evt and ../../acisf10812/products/events/fullrun_ccd3_acisf10812_pi14-548_pass1_cl_src44_bgd.evt exist, delete to re-create
[Fri Oct  7 18:07:43 2011] Size of ../../acisf10812/products/events/fullrun_ccd3_acisf10812_pi14-548_pass1_cl_src44_src.evt.gz[events] = 44 counts
[Fri Oct  7 18:07:43 2011] Mean chipx,y = (721.39, 186.27)
[Fri Oct  7 18:07:43 2011] Mean tdetx,y = (4945.73, 3782.39)
[Fri Oct  7 18:07:43 2011] chipx,y range = (701.00-741.00, 165.00-203.00)
[Fri Oct  7 18:07:43 2011] Size of ../../acisf10812/products/events/fullrun_ccd3_acisf10812_pi14-548_pass1_cl_src44_bgd.evt.gz[events] = 28 counts
[Fri Oct  7 18:07:43 2011] ../../acisf10812/products/images/fullrun_ccd3_acisf10812_pi14-548_pass1_cl_src44_src.img and ../../acisf10812/products/images/fullrun_ccd3_acisf10812_pi14-548_pass1_cl_src44_bgd.img exist, delete to re-create
[Fri Oct  7 18:07:43 2011] ../../acisf10812/products/spectra/fullrun_ccd3_acisf10812_pi14-548_pass1_cl_src44_src.pi and ../../acisf10812/products/spectra/fullrun_ccd3_acisf10812_pi14-548_pass1_cl_src44_bgd.pi exist, delete to re-create
[Fri Oct  7 18:07:43 2011] Not generating rmf since there are only 35 counts
[Fri Oct  7 18:07:46 2011] ../../acisf10812/products/lightcurves/fullrun_ccd3_acisf10812_pi14-548_pass1_cl_src44_src.lc and ../../acisf10812/products/lightcurves/fullrun_ccd3_acisf10812_pi14-548_pass1_cl_src44_bgd.lc exist, delete to re-create
[Fri Oct  7 18:10:20 2011] 177.173
[Fri Oct  7 18:10:51 2011] Updating aperture counts using extracted products
[Fri Oct  7 18:10:51 2011] Error reading totcts from fullrun_ccd3_acisf10812_pi14-548_pass1_cl_src44_src.pi.gz
[Fri Oct  7 18:10:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 18:10:52 2011] Using photon index=1.80, rate=0.00145, arf fullrun_ccd3_acisf10812_pi14-548_pass1_cl_src44.arf
[Fri Oct  7 18:10:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 18:10:52 2011] Updating source flux to 2.3e-14
[Fri Oct  7 18:12:03 2011] Source 44 has fewer than 100.000000 counts, skipping spectral fitting