[Fri Oct  7 17:53:39 2011] Detection parameters:
  Position = (342.7, 323.2) = 22 53 45.24 62 38 28.5
  Extent = 0.5" x 0.5", rotation angle = 67 degrees
  Source counts = 11.6 +/- 3.5
  Background counts = 0.4
  Rate = 0.0005 +/- 0.0001

[Fri Oct  7 17:53:40 2011] Off-axis axis estimate = 2.85'
[Fri Oct  7 17:55:05 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:55:05 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Oct  7 17:55:05 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.857
[Fri Oct  7 17:55:05 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.55"
[Fri Oct  7 17:55:06 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src21.ximg exists
[Fri Oct  7 17:55:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src21.csv
[Fri Oct  7 17:55:06 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src21_1.ximg exists
[Fri Oct  7 17:55:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src21.csv
[Fri Oct  7 17:55:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:55:07 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Fri Oct  7 17:55:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src21.csv
[Fri Oct  7 17:55:07 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Oct  7 17:55:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src21.csv
[Fri Oct  7 17:55:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:55:36 2011] Spatial fit model total counts = 14.385200, observed total counts = 16.000000
[Fri Oct  7 17:55:36 2011] Offset between fit and detection position for source 23 = 1.048009 pixels
[Fri Oct  7 17:55:36 2011] 14.337630 total counts/ 4.906380 bgd. counts: snr = 4.257833
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.048009 pixels
  Position = (343.4, 324.0) = 22 53 45.22 62 38 28.6
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 9.4 +/- 3.8
  Background counts = 4.9
  Rate = 0.0004 +/- 0.0002
[Fri Oct  7 17:55:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:55:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:55:36 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:55:36 2011] Source does appear to be extended
[Fri Oct  7 17:55:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 17:55:36 2011] Deleting source due to low Poisson probability 0.8