[Fri Oct  7 17:53:39 2011] Detection parameters:
  Position = (408.0, 127.4) = 22 53 40.57 62 36 52.2
  Extent = 0.5" x 0.5", rotation angle = 155 degrees
  Source counts = 10.8 +/- 3.5
  Background counts = 1.2
  Rate = 0.0004 +/- 0.0001

[Fri Oct  7 17:53:40 2011] Off-axis axis estimate = 1.26'
[Fri Oct  7 17:55:05 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:55:05 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct  7 17:55:05 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.917
[Fri Oct  7 17:55:05 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 0.38"
[Fri Oct  7 17:55:06 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src22.ximg exists
[Fri Oct  7 17:55:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src22.csv
[Fri Oct  7 17:55:06 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src22_1.ximg exists
[Fri Oct  7 17:55:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src22.csv
[Fri Oct  7 17:55:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:55:07 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Fri Oct  7 17:55:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src22.csv
[Fri Oct  7 17:55:07 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Fri Oct  7 17:55:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src22.csv
[Fri Oct  7 17:55:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:55:36 2011] Spatial fit model total counts = 11.033800, observed total counts = 15.000000
[Fri Oct  7 17:55:36 2011] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Oct  7 17:55:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:55:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:55:36 2011] Assessing source extent using major
[Fri Oct  7 17:55:36 2011] Source does appear to be extended
[Fri Oct  7 17:55:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 17:55:36 2011] Deleting source due to low Poisson probability 0.9