[Fri Oct  7 17:53:39 2011] Detection parameters:
  Position = (543.6, 118.6) = 22 53 30.90 62 36 47.8
  Extent = 0.5" x 0.5", rotation angle = 126 degrees
  Source counts = 17.5 +/- 4.2
  Background counts = 0.5
  Rate = 0.0007 +/- 0.0002

[Fri Oct  7 17:53:40 2011] Off-axis axis estimate = 0.78'
[Fri Oct  7 17:55:05 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:55:05 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct  7 17:55:05 2011] source mask rpix=0.8, npix_max = 6, mask sum = 5, frac = 0.766
[Fri Oct  7 17:55:05 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.38"
[Fri Oct  7 17:55:06 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src18.ximg exists
[Fri Oct  7 17:55:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src18.csv
[Fri Oct  7 17:55:06 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src18_1.ximg exists
[Fri Oct  7 17:55:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src18.csv
[Fri Oct  7 17:55:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:55:07 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Fri Oct  7 17:55:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src18.csv
[Fri Oct  7 17:55:07 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Oct  7 17:55:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src18.csv
[Fri Oct  7 17:55:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:55:36 2011] Spatial fit model total counts = 16.887200, observed total counts = 20.000000
[Fri Oct  7 17:55:36 2011] Offset between fit and detection position for source 18 = 0.613292 pixels
[Fri Oct  7 17:55:36 2011] 17.144549 total counts/ 0.890549 bgd. counts: snr = 17.223894
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.613292 pixels
  Position = (544.1, 119.0) = 22 53 30.90 62 36 47.8
  Extent = 0.4 (0.3-0.6)" x 0.3 (0.2-0.4)", rotation angle = 354 (311-43) degrees
  Source counts = 16.3 +/- 4.1
  Background counts = 0.9
  Rate = 0.0007 +/- 0.0002
[Fri Oct  7 17:55:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:55:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:55:36 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:55:36 2011] Source does appear to be extended
[Fri Oct  7 17:55:36 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.77
[Fri Oct  7 17:55:36 2011] Deleting source due to low Poisson probability 0.9