[Fri Oct  7 17:53:38 2011] Detection parameters:
  Position = (604.8, 536.7) = 22 53 26.53 62 40 13.6
  Extent = 0.8" x 0.6", rotation angle = 139 degrees
  Source counts = 39.2 +/- 6.4
  Background counts = 1.8
  Rate = 0.002 +/- 0.0003

[Fri Oct  7 17:53:40 2011] Off-axis axis estimate = 4.24'
[Fri Oct  7 17:55:05 2011] Using EEF radius (= 0.91 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:55:05 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Fri Oct  7 17:55:05 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.141
[Fri Oct  7 17:55:05 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.91"
[Fri Oct  7 17:55:06 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src7.ximg exists
[Fri Oct  7 17:55:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src7.csv
[Fri Oct  7 17:55:06 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Oct  7 17:55:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src7.csv
[Fri Oct  7 17:55:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10812_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:55:06 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Oct  7 17:55:06 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Oct  7 17:55:06 2011] Fit fullrun_ccd2_acisf10812_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Oct  7 17:55:36 2011] Spatial fit model total counts = 42.580200, observed total counts = 43.000000
[Fri Oct  7 17:55:36 2011] Offset between fit and detection position for source 12 = 0.918849 pixels
[Fri Oct  7 17:55:36 2011] 41.797480 total counts/ 8.156980 bgd. counts: snr = 11.778710
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.918849 pixels
  Position = (605.5, 537.3) = 22 53 26.51 62 40 13.6
  Extent = 0.9 (0.7-1.4)", rotation angle = 0
  Source counts = 33.6 +/- 6.5
  Background counts = 8.2
  Rate = 0.001 +/- 0.0003
[Fri Oct  7 17:55:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:55:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:55:36 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:55:36 2011] Source does appear to be extended
[Fri Oct  7 17:55:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 17:56:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:56:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 17:56:23 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Fri Oct  7 17:56:23 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.089
[Fri Oct  7 17:56:23 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.93"
[Fri Oct  7 17:56:23 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass1_src7.ximg exists
[Fri Oct  7 17:56:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass1_src7.csv
[Fri Oct  7 17:56:23 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Oct  7 17:56:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10812_pi14-548_cl_pass1_src7.csv
[Fri Oct  7 17:56:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10812_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10812_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:56:24 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Oct  7 17:56:24 2011] fullrun_ccd2_acisf10812_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Oct  7 17:56:24 2011] Fit fullrun_ccd2_acisf10812_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Oct  7 17:56:47 2011] Spatial fit model total counts = 42.847800, observed total counts = 43.000000
[Fri Oct  7 17:56:47 2011] Offset between fit and detection position for source 12 = 0.023364 pixels
[Fri Oct  7 17:56:47 2011] 42.062730 total counts/ 7.792730 bgd. counts: snr = 12.276351
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.023364 pixels
  Position = (605.4, 537.3) = 22 53 26.51 62 40 13.6
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 34.3 +/- 6.5
  Background counts = 7.8
  Rate = 0.001 +/- 0.0003
[Fri Oct  7 17:56:47 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:56:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:56:47 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:56:47 2011] Source does appear to be extended
[Fri Oct  7 17:56:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 18:06:00 2011] Not overwriting source region fullrun_ccd2_acisf10812_pi14-548_pass1_cl_src12_src.reg
[Fri Oct  7 18:06:00 2011] Extracting stamp from image fullrun_ccd2_acisf10812_pi14-548_cl_sm2.00.img.gz, (561, 493) - (650, 581)
[Fri Oct  7 18:06:00 2011] Writing fullrun_ccd2_acisf10812_pi14-548_pass1_cl_src12.gif
[Fri Oct  7 18:06:30 2011] ../../acisf10812/products/events/fullrun_ccd2_acisf10812_pi14-548_pass1_cl_src12_src.evt and ../../acisf10812/products/events/fullrun_ccd2_acisf10812_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Fri Oct  7 18:06:30 2011] Size of ../../acisf10812/products/events/fullrun_ccd2_acisf10812_pi14-548_pass1_cl_src12_src.evt.gz[events] = 41 counts
[Fri Oct  7 18:06:30 2011] Mean chipx,y = (379.32, 627.20)
[Fri Oct  7 18:06:30 2011] Mean tdetx,y = (3688.20, 3706.68)
[Fri Oct  7 18:06:30 2011] chipx,y range = (361.00-401.00, 602.00-643.00)
[Fri Oct  7 18:06:31 2011] Size of ../../acisf10812/products/events/fullrun_ccd2_acisf10812_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 24 counts
[Fri Oct  7 18:06:31 2011] ../../acisf10812/products/images/fullrun_ccd2_acisf10812_pi14-548_pass1_cl_src12_src.img and ../../acisf10812/products/images/fullrun_ccd2_acisf10812_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Fri Oct  7 18:06:31 2011] ../../acisf10812/products/spectra/fullrun_ccd2_acisf10812_pi14-548_pass1_cl_src12_src.pi and ../../acisf10812/products/spectra/fullrun_ccd2_acisf10812_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Fri Oct  7 18:06:31 2011] Not generating rmf since there are only 34 counts
[Fri Oct  7 18:06:34 2011] ../../acisf10812/products/lightcurves/fullrun_ccd2_acisf10812_pi14-548_pass1_cl_src12_src.lc and ../../acisf10812/products/lightcurves/fullrun_ccd2_acisf10812_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Fri Oct  7 18:07:28 2011] 185.66
[Fri Oct  7 18:10:51 2011] Updating aperture counts using extracted products
[Fri Oct  7 18:10:51 2011] Error reading totcts from fullrun_ccd2_acisf10812_pi14-548_pass1_cl_src12_src.pi.gz
[Fri Oct  7 18:10:51 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 18:10:51 2011] Using photon index=1.80, rate=0.00138, arf fullrun_ccd2_acisf10812_pi14-548_pass1_cl_src12.arf
[Fri Oct  7 18:10:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 18:10:51 2011] Updating source flux to 2.1e-14
[Fri Oct  7 18:11:40 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting