[Fri Oct  7 17:53:30 2011] Detection parameters:
  Position = (823.1, 1143.6) = 22 53 45.03 62 33 51.7
  Extent = 0.5" x 0.5", rotation angle = 114 degrees
  Source counts = 17.4 +/- 4.2
  Background counts = 0.6
  Rate = 0.0007 +/- 0.0002

[Fri Oct  7 17:53:37 2011] Off-axis axis estimate = 2.62'
[Fri Oct  7 17:55:00 2011] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:55:00 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Fri Oct  7 17:55:00 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.950
[Fri Oct  7 17:55:00 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.51"
[Fri Oct  7 17:55:01 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src17.ximg exists
[Fri Oct  7 17:55:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src17.csv
[Fri Oct  7 17:55:01 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src17_1.ximg exists
[Fri Oct  7 17:55:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src17.csv
[Fri Oct  7 17:55:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:55:02 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Fri Oct  7 17:55:03 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Oct  7 17:55:03 2011] Fit fullrun_ccd1_acisf10812_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Oct  7 17:55:31 2011] Spatial fit model total counts = 25.484500, observed total counts = 26.000000
[Fri Oct  7 17:55:31 2011] Offset between fit and detection position for source 9 = 0.732936 pixels
[Fri Oct  7 17:55:31 2011] 24.579430 total counts/ 8.474630 bgd. counts: snr = 5.532163
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.732936 pixels
  Position = (823.5, 1144.2) = 22 53 45.04 62 33 51.7
  Extent = 0.3 (0.3-0.5)", rotation angle = 0
  Source counts = 16.1 +/- 5.0
  Background counts = 8.5
  Rate = 0.0006 +/- 0.0002
[Fri Oct  7 17:55:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:55:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:55:31 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:55:31 2011] Source does appear to be extended
[Fri Oct  7 17:55:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 17:56:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:56:19 2011] Initial guess for spatial extent in simple fitting = 0.32"
[Fri Oct  7 17:56:19 2011] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.132
[Fri Oct  7 17:56:19 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.32"
[Fri Oct  7 17:56:21 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src16.ximg exists
[Fri Oct  7 17:56:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src16.csv
[Fri Oct  7 17:56:21 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src16_1.ximg exists
[Fri Oct  7 17:56:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src16.csv
[Fri Oct  7 17:56:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:56:22 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Fri Oct  7 17:56:22 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Oct  7 17:56:22 2011] Fit fullrun_ccd1_acisf10812_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Oct  7 17:56:44 2011] Spatial fit model total counts = 25.150000, observed total counts = 26.000000
[Fri Oct  7 17:56:44 2011] Offset between fit and detection position for source 9 = 0.012835 pixels
[Fri Oct  7 17:56:44 2011] 23.895150 total counts/ 7.585550 bgd. counts: snr = 5.921746
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.012835 pixels
  Position = (823.5, 1144.2) = 22 53 45.04 62 33 51.7
  Extent = 0.3 (0.3-0.5)", rotation angle = 0
  Source counts = 16.3 +/- 4.9
  Background counts = 7.6
  Rate = 0.0007 +/- 0.0002
[Fri Oct  7 17:56:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:56:44 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:56:44 2011] Source does appear to be extended
[Fri Oct  7 17:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 18:02:26 2011] Not overwriting source region fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src9_src.reg
[Fri Oct  7 18:02:26 2011] Extracting stamp from image fullrun_ccd1_acisf10812_pi14-548_cl_sm2.00.img.gz, (809, 1130) - (838, 1159)
[Fri Oct  7 18:02:26 2011] Writing fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src9.gif
[Fri Oct  7 18:03:39 2011] ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src9_src.evt and ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Fri Oct  7 18:03:39 2011] Size of ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src9_src.evt.gz[events] = 18 counts
[Fri Oct  7 18:03:39 2011] Mean chipx,y = (177.33, 869.56)
[Fri Oct  7 18:03:39 2011] Mean tdetx,y = (4262.44, 4284.33)
[Fri Oct  7 18:03:39 2011] chipx,y range = (165.00-198.00, 854.00-888.00)
[Fri Oct  7 18:03:39 2011] Size of ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 7 counts
[Fri Oct  7 18:03:39 2011] ../../acisf10812/products/images/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src9_src.img and ../../acisf10812/products/images/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Fri Oct  7 18:03:39 2011] ../../acisf10812/products/spectra/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src9_src.pi and ../../acisf10812/products/spectra/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Fri Oct  7 18:03:39 2011] Not generating rmf since there are only 16 counts
[Fri Oct  7 18:03:42 2011] ../../acisf10812/products/lightcurves/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src9_src.lc and ../../acisf10812/products/lightcurves/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Fri Oct  7 18:05:57 2011] 195.723
[Fri Oct  7 18:10:50 2011] Updating aperture counts using extracted products
[Fri Oct  7 18:10:50 2011] Error reading totcts from fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src9_src.pi.gz
[Fri Oct  7 18:10:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 18:10:50 2011] Using photon index=1.80, rate=0.000657, arf fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src9.arf
[Fri Oct  7 18:10:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 18:10:50 2011] Updating source flux to 9.6e-15
[Fri Oct  7 18:11:36 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting