[Fri Oct  7 17:53:30 2011] Detection parameters:
  Position = (1075.5, 848.2) = 22 53 27.07 62 31 26.4
  Extent = 0.7" x 0.5", rotation angle = 65 degrees
  Source counts = 82.9 +/- 9.2
  Background counts = 2.1
  Rate = 0.003 +/- 0.0004

[Fri Oct  7 17:53:37 2011] Off-axis axis estimate = 4.64'
[Fri Oct  7 17:55:00 2011] Using EEF radius (= 1.04 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:55:00 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Fri Oct  7 17:55:00 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.912
[Fri Oct  7 17:55:00 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.04"
[Fri Oct  7 17:55:01 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src5.ximg exists
[Fri Oct  7 17:55:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src5.csv
[Fri Oct  7 17:55:01 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Oct  7 17:55:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src5.csv
[Fri Oct  7 17:55:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:55:01 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Oct  7 17:55:01 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Oct  7 17:55:01 2011] Fit fullrun_ccd1_acisf10812_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Oct  7 17:55:31 2011] Spatial fit model total counts = 88.570100, observed total counts = 88.000000
[Fri Oct  7 17:55:31 2011] Offset between fit and detection position for source 3 = 0.914803 pixels
[Fri Oct  7 17:55:31 2011] 88.010500 total counts/ 17.276400 bgd. counts: snr = 17.017753
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.914803 pixels
  Position = (1076.2, 848.8) = 22 53 27.06 62 31 26.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 70.7 +/- 9.4
  Background counts = 17.3
  Rate = 0.003 +/- 0.0004
[Fri Oct  7 17:55:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:55:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:55:31 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:55:31 2011] Source does appear to be extended
[Fri Oct  7 17:55:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 17:56:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:56:19 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Oct  7 17:56:19 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.855
[Fri Oct  7 17:56:19 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.55"
[Fri Oct  7 17:56:20 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src5.ximg exists
[Fri Oct  7 17:56:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src5.csv
[Fri Oct  7 17:56:20 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Oct  7 17:56:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src5.csv
[Fri Oct  7 17:56:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:56:21 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Oct  7 17:56:21 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Oct  7 17:56:21 2011] Fit fullrun_ccd1_acisf10812_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Oct  7 17:56:44 2011] Spatial fit model total counts = 87.836500, observed total counts = 88.000000
[Fri Oct  7 17:56:44 2011] Offset between fit and detection position for source 3 = 0.019427 pixels
[Fri Oct  7 17:56:44 2011] 86.415800 total counts/ 15.774600 bgd. counts: snr = 17.786025
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.019427 pixels
  Position = (1076.2, 848.8) = 22 53 27.05 62 31 26.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 70.6 +/- 9.3
  Background counts = 15.8
  Rate = 0.003 +/- 0.0004
[Fri Oct  7 17:56:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:56:44 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:56:44 2011] Source does appear to be extended
[Fri Oct  7 17:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 18:02:26 2011] Not overwriting source region fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src3_src.reg
[Fri Oct  7 18:02:26 2011] Extracting stamp from image fullrun_ccd1_acisf10812_pi14-548_cl_sm2.00.img.gz, (1050, 823) - (1102, 875)
[Fri Oct  7 18:02:26 2011] Writing fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src3.gif
[Fri Oct  7 18:02:47 2011] ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src3_src.evt and ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct  7 18:02:47 2011] Size of ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src3_src.evt.gz[events] = 77 counts
[Fri Oct  7 18:02:47 2011] Mean chipx,y = (87.78, 493.21)
[Fri Oct  7 18:02:47 2011] Mean tdetx,y = (4638.79, 4194.78)
[Fri Oct  7 18:02:47 2011] chipx,y range = (69.00-107.00, 476.00-511.00)
[Fri Oct  7 18:02:47 2011] Size of ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 17 counts
[Fri Oct  7 18:02:47 2011] ../../acisf10812/products/images/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src3_src.img and ../../acisf10812/products/images/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct  7 18:02:47 2011] ../../acisf10812/products/spectra/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src3_src.pi and ../../acisf10812/products/spectra/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct  7 18:02:47 2011] Not generating rmf since there are only 70 counts
[Fri Oct  7 18:02:51 2011] ../../acisf10812/products/lightcurves/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src3_src.lc and ../../acisf10812/products/lightcurves/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct  7 18:05:56 2011] 184.7
[Fri Oct  7 18:10:50 2011] Updating aperture counts using extracted products
[Fri Oct  7 18:10:50 2011] Error reading totcts from fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct  7 18:10:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 18:10:50 2011] Using photon index=1.80, rate=0.00285, arf fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src3.arf
[Fri Oct  7 18:10:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 18:10:50 2011] Updating source flux to 4.3e-14
[Fri Oct  7 18:11:36 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting