[Fri Oct  7 17:53:30 2011] Detection parameters:
  Position = (1002.5, 1145.1) = 22 53 32.26 62 33 52.5
  Extent = 0.5" x 0.5", rotation angle = 47 degrees
  Source counts = 58.2 +/- 7.7
  Background counts = 0.8
  Rate = 0.002 +/- 0.0003

[Fri Oct  7 17:53:37 2011] Off-axis axis estimate = 2.16'
[Fri Oct  7 17:55:00 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:55:00 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Oct  7 17:55:00 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.132
[Fri Oct  7 17:55:00 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.45"
[Fri Oct  7 17:55:01 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src7.ximg exists
[Fri Oct  7 17:55:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src7.csv
[Fri Oct  7 17:55:01 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Oct  7 17:55:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src7.csv
[Fri Oct  7 17:55:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:55:01 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Oct  7 17:55:01 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Oct  7 17:55:01 2011] Fit fullrun_ccd1_acisf10812_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Oct  7 17:55:31 2011] Spatial fit model total counts = 58.919400, observed total counts = 62.000000
[Fri Oct  7 17:55:31 2011] Offset between fit and detection position for source 10 = 0.599099 pixels
[Fri Oct  7 17:55:31 2011] 58.700291 total counts/ 0.329191 bgd. counts: snr = 101.735823
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.599099 pixels
  Position = (1003.0, 1145.5) = 22 53 32.26 62 33 52.4
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 58.4 +/- 7.7
  Background counts = 0.3
  Rate = 0.002 +/- 0.0003
[Fri Oct  7 17:55:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:55:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:55:31 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:55:31 2011] Source does appear to be extended
[Fri Oct  7 17:55:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 17:56:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:56:19 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Oct  7 17:56:19 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.758
[Fri Oct  7 17:56:19 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.45"
[Fri Oct  7 17:56:20 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src7.ximg exists
[Fri Oct  7 17:56:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src7.csv
[Fri Oct  7 17:56:20 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Oct  7 17:56:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src7.csv
[Fri Oct  7 17:56:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:56:22 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Oct  7 17:56:22 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Oct  7 17:56:22 2011] Fit fullrun_ccd1_acisf10812_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Oct  7 17:56:44 2011] Spatial fit model total counts = 60.051500, observed total counts = 62.000000
[Fri Oct  7 17:56:44 2011] Offset between fit and detection position for source 10 = 0.002734 pixels
[Fri Oct  7 17:56:44 2011] 59.866330 total counts/ 1.443930 bgd. counts: snr = 48.619034
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.002734 pixels
  Position = (1003.0, 1145.5) = 22 53 32.26 62 33 52.4
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 58.4 +/- 7.7
  Background counts = 1.4
  Rate = 0.002 +/- 0.0003
[Fri Oct  7 17:56:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:56:44 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:56:44 2011] Source does appear to be extended
[Fri Oct  7 17:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 18:02:26 2011] Not overwriting source region fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src10_src.reg
[Fri Oct  7 18:02:26 2011] Extracting stamp from image fullrun_ccd1_acisf10812_pi14-548_cl_sm2.00.img.gz, (982, 1125) - (1023, 1166)
[Fri Oct  7 18:02:26 2011] Writing fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src10.gif
[Fri Oct  7 18:02:55 2011] ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src10_src.evt and ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Oct  7 18:02:55 2011] Size of ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src10_src.evt.gz[events] = 59 counts
[Fri Oct  7 18:02:55 2011] Mean chipx,y = (22.15, 791.44)
[Fri Oct  7 18:02:55 2011] Mean tdetx,y = (4340.56, 4129.15)
[Fri Oct  7 18:02:55 2011] chipx,y range = (2.00-38.00, 774.00-809.00)
[Fri Oct  7 18:02:55 2011] Size of ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 5 counts
[Fri Oct  7 18:02:55 2011] ../../acisf10812/products/images/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src10_src.img and ../../acisf10812/products/images/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Oct  7 18:02:55 2011] ../../acisf10812/products/spectra/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src10_src.pi and ../../acisf10812/products/spectra/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Oct  7 18:02:55 2011] Not generating rmf since there are only 58 counts
[Fri Oct  7 18:02:59 2011] ../../acisf10812/products/lightcurves/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src10_src.lc and ../../acisf10812/products/lightcurves/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Oct  7 18:05:57 2011] 195.883
[Fri Oct  7 18:10:50 2011] Updating aperture counts using extracted products
[Fri Oct  7 18:10:50 2011] Error reading totcts from fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Oct  7 18:10:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 18:10:50 2011] Using photon index=1.80, rate=0.00235, arf fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src10.arf
[Fri Oct  7 18:10:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 18:10:50 2011] Updating source flux to 3.4e-14
[Fri Oct  7 18:11:36 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting