[Fri Oct  7 17:53:30 2011] Detection parameters:
  Position = (945.9, 885.4) = 22 53 36.29 62 31 44.7
  Extent = 0.6" x 0.5", rotation angle = 45 degrees
  Source counts = 204.7 +/- 14.4
  Background counts = 2.3
  Rate = 0.008 +/- 0.0006

[Fri Oct  7 17:53:37 2011] Off-axis axis estimate = 4.32'
[Fri Oct  7 17:55:00 2011] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:55:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 17:55:00 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Fri Oct  7 17:55:00 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.093
[Fri Oct  7 17:55:00 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.93"
[Fri Oct  7 17:55:01 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 17:55:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 17:55:01 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 17:55:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 17:55:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10812_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:55:01 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 17:55:01 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 17:55:01 2011] Fit fullrun_ccd1_acisf10812_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 17:55:31 2011] Spatial fit model total counts = 208.578000, observed total counts = 213.000000
[Fri Oct  7 17:55:31 2011] Offset between fit and detection position for source 1 = 0.789425 pixels
[Fri Oct  7 17:55:31 2011] 208.645770 total counts/ 9.762770 bgd. counts: snr = 63.651865
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.789425 pixels
  Position = (946.4, 885.9) = 22 53 36.28 62 31 44.7
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 198.9 +/- 14.4
  Background counts = 9.8
  Rate = 0.008 +/- 0.0006
[Fri Oct  7 17:55:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:55:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:55:31 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:55:31 2011] Source does appear to be extended
[Fri Oct  7 17:55:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 17:56:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:56:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 17:56:19 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Fri Oct  7 17:56:19 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.989
[Fri Oct  7 17:56:19 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.74"
[Fri Oct  7 17:56:20 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 17:56:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 17:56:20 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 17:56:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 17:56:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10812_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:56:21 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 17:56:21 2011] fullrun_ccd1_acisf10812_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 17:56:21 2011] Fit fullrun_ccd1_acisf10812_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 17:56:44 2011] Spatial fit model total counts = 209.293000, observed total counts = 213.000000
[Fri Oct  7 17:56:44 2011] Offset between fit and detection position for source 1 = 0.001195 pixels
[Fri Oct  7 17:56:44 2011] 209.351620 total counts/ 8.983620 bgd. counts: snr = 66.850195
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001195 pixels
  Position = (946.4, 885.9) = 22 53 36.28 62 31 44.7
  Extent = 0.8 (0.7-0.8)", rotation angle = 0
  Source counts = 200.4 +/- 14.5
  Background counts = 9.0
  Rate = 0.008 +/- 0.0006
[Fri Oct  7 17:56:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:56:44 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:56:44 2011] Source does appear to be extended
[Fri Oct  7 17:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 18:02:26 2011] Not overwriting source region fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1_src.reg
[Fri Oct  7 18:02:26 2011] Extracting stamp from image fullrun_ccd1_acisf10812_pi14-548_cl_sm2.00.img.gz, (912, 851) - (981, 921)
[Fri Oct  7 18:02:26 2011] Writing fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1.gif
[Fri Oct  7 18:02:30 2011] ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1_src.evt and ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct  7 18:02:30 2011] Size of ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1_src.evt.gz[events] = 208 counts
[Fri Oct  7 18:02:30 2011] Mean chipx,y = (187.17, 582.86)
[Fri Oct  7 18:02:30 2011] Mean tdetx,y = (4549.14, 4294.17)
[Fri Oct  7 18:02:30 2011] chipx,y range = (167.00-208.00, 566.00-604.00)
[Fri Oct  7 18:02:30 2011] Size of ../../acisf10812/products/events/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 15 counts
[Fri Oct  7 18:02:30 2011] ../../acisf10812/products/images/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1_src.img and ../../acisf10812/products/images/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct  7 18:02:30 2011] ../../acisf10812/products/spectra/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1_src.pi and ../../acisf10812/products/spectra/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct  7 18:02:35 2011] ../../acisf10812/products/lightcurves/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1_src.lc and ../../acisf10812/products/lightcurves/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct  7 18:05:56 2011] Keeping rmf generated by specextract
[Fri Oct  7 18:05:56 2011] 191.961
[Fri Oct  7 18:10:49 2011] Updating aperture counts using extracted products
[Fri Oct  7 18:10:50 2011] Error reading totcts from fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct  7 18:10:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 18:10:50 2011] Using photon index=1.80, rate=0.00807, arf fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 18:10:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 18:10:50 2011] Updating source flux to 1.2e-13
[Fri Oct  7 18:11:40 2011] Reading fit data from acisf10812/analysis//spectral/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct  7 18:11:40 2011] Spectral fit parameter nH value = 9.87057e+21
[Fri Oct  7 18:11:40 2011] Spectral fit parameter PhoIndex value = 1.9981
[Fri Oct  7 18:11:40 2011] Failed to get F(0.3-8.0) from acisf10812/analysis//spectral/fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 18:11:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 18:11:40 2011] Using Nh = 9.9e+21, photon index=2.00, rate=0.00807, arf fullrun_ccd1_acisf10812_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 18:11:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 18:11:40 2011] Updating source flux to 1.1e-13