[Fri Oct  7 17:53:24 2011] Detection parameters:
  Position = (1210.5, 465.9) = 22 53 50.08 62 35 50.3
  Extent = 0.5" x 0.5", rotation angle = 10 degrees
  Source counts = 28.6 +/- 5.5
  Background counts = 1.4
  Rate = 0.001 +/- 0.0002

[Fri Oct  7 17:53:29 2011] Off-axis axis estimate = 2.05'
[Fri Oct  7 17:54:56 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:54:56 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Oct  7 17:54:56 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.175
[Fri Oct  7 17:54:56 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.43"
[Fri Oct  7 17:54:58 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src5.ximg exists
[Fri Oct  7 17:54:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src5.csv
[Fri Oct  7 17:54:58 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Oct  7 17:54:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src5.csv
[Fri Oct  7 17:54:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:54:59 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Oct  7 17:54:59 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Oct  7 17:54:59 2011] Fit fullrun_ccd0_acisf10812_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Oct  7 17:55:26 2011] Spatial fit model total counts = 34.205500, observed total counts = 35.000000
[Fri Oct  7 17:55:26 2011] Offset between fit and detection position for source 6 = 0.744249 pixels
[Fri Oct  7 17:55:26 2011] 33.997350 total counts/ 5.750650 bgd. counts: snr = 11.779022
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.744249 pixels
  Position = (1211.1, 466.4) = 22 53 50.07 62 35 50.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 28.2 +/- 5.8
  Background counts = 5.8
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 17:55:26 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:55:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:55:26 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:55:26 2011] Source does appear to be extended
[Fri Oct  7 17:55:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 17:56:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:56:14 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Oct  7 17:56:14 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.792
[Fri Oct  7 17:56:14 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.43"
[Fri Oct  7 17:56:16 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src5.ximg exists
[Fri Oct  7 17:56:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src5.csv
[Fri Oct  7 17:56:16 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Oct  7 17:56:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src5.csv
[Fri Oct  7 17:56:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:56:18 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Oct  7 17:56:18 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Oct  7 17:56:18 2011] Fit fullrun_ccd0_acisf10812_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Oct  7 17:56:40 2011] Spatial fit model total counts = 36.616200, observed total counts = 35.000000
[Fri Oct  7 17:56:40 2011] Offset between fit and detection position for source 6 = 0.023081 pixels
[Fri Oct  7 17:56:40 2011] 36.315580 total counts/ 5.700280 bgd. counts: snr = 12.823023
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.023081 pixels
  Position = (1211.0, 466.4) = 22 53 50.07 62 35 50.3
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 30.6 +/- 6.0
  Background counts = 5.7
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 17:56:40 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:56:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:56:40 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:56:40 2011] Source does appear to be extended
[Fri Oct  7 17:56:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 17:57:21 2011] Not overwriting source region fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src6_src.reg
[Fri Oct  7 17:57:21 2011] Extracting stamp from image fullrun_ccd0_acisf10812_pi14-548_cl_sm2.00.img.gz, (1191, 446) - (1231, 487)
[Fri Oct  7 17:57:21 2011] Writing fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src6.gif
[Fri Oct  7 17:57:45 2011] ../../acisf10812/products/events/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src6_src.evt and ../../acisf10812/products/events/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Oct  7 17:57:45 2011] Size of ../../acisf10812/products/events/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src6_src.evt.gz[events] = 30 counts
[Fri Oct  7 17:57:45 2011] Mean chipx,y = (889.63, 950.07)
[Fri Oct  7 17:57:45 2011] Mean tdetx,y = (4011.07, 4242.37)
[Fri Oct  7 17:57:45 2011] chipx,y range = (873.00-908.00, 936.00-969.00)
[Fri Oct  7 17:57:45 2011] Size of ../../acisf10812/products/events/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 11 counts
[Fri Oct  7 17:57:45 2011] ../../acisf10812/products/images/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src6_src.img and ../../acisf10812/products/images/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Oct  7 17:57:45 2011] ../../acisf10812/products/spectra/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src6_src.pi and ../../acisf10812/products/spectra/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Oct  7 17:57:45 2011] Not generating rmf since there are only 30 counts
[Fri Oct  7 17:57:49 2011] ../../acisf10812/products/lightcurves/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src6_src.lc and ../../acisf10812/products/lightcurves/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Oct  7 18:02:24 2011] 201.629
[Fri Oct  7 18:10:48 2011] Updating aperture counts using extracted products
[Fri Oct  7 18:10:48 2011] Error reading totcts from fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Oct  7 18:10:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 18:10:49 2011] Using photon index=1.80, rate=0.00123, arf fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src6.arf
[Fri Oct  7 18:10:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 18:10:49 2011] Updating source flux to 1.7e-14
[Fri Oct  7 18:11:00 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting