[Fri Oct  7 17:53:27 2011] Detection parameters:
  Position = (1180.7, 701.8) = 22 53 52.22 62 37 46.4
  Extent = 0.7" x 0.5", rotation angle = 26 degrees
  Source counts = 12.5 +/- 3.6
  Background counts = 0.5
  Rate = 0.0005 +/- 0.0001

[Fri Oct  7 17:53:29 2011] Off-axis axis estimate = 2.87'
[Fri Oct  7 17:54:56 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:54:56 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Oct  7 17:54:56 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.850
[Fri Oct  7 17:54:56 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 0.55"
[Fri Oct  7 17:54:58 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src41.ximg exists
[Fri Oct  7 17:54:58 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src41_1.ximg exists
[Fri Oct  7 17:54:58 2011] Fit fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src41 appears to have run properly
[Fri Oct  7 17:55:00 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass0_tfrozen_src41.ximg exists
[Fri Oct  7 17:55:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10812_pi14-548_cl_pass0_tfrozen_src41.csv
[Fri Oct  7 17:55:00 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass0_tfrozen_src41_1.ximg exists
[Fri Oct  7 17:55:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10812_pi14-548_cl_pass0_tfrozen_src41.csv
[Fri Oct  7 17:55:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10812_pi14-548_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10812_pi14-548_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:55:26 2011] Spatial fit model total counts = 17.451200, observed total counts = 15.000000
[Fri Oct  7 17:55:26 2011] Offset between fit and detection position for source 50 = 0.863907 pixels
[Fri Oct  7 17:55:26 2011] 16.841960 total counts/ 6.610360 bgd. counts: snr = 3.979523
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.863907 pixels
  Position = (1181.6, 702.0) = 22 53 52.19 62 37 46.3
  Extent = 0.5 (0.3-1.0)", rotation angle = 0
  Source counts = 10.2 +/- 4.1
  Background counts = 6.6
  Rate = 0.0004 +/- 0.0002
[Fri Oct  7 17:55:26 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:55:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:55:26 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:55:26 2011] Source does appear to be extended
[Fri Oct  7 17:55:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 17:56:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:56:14 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Fri Oct  7 17:56:14 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.737
[Fri Oct  7 17:56:14 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 0.46"
[Fri Oct  7 17:56:16 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src41.ximg exists
[Fri Oct  7 17:56:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src41.csv
[Fri Oct  7 17:56:16 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src41_1.ximg exists
[Fri Oct  7 17:56:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src41.csv
[Fri Oct  7 17:56:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:56:19 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass1_tfrozen_src41.ximg exists
[Fri Oct  7 17:56:19 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass1_tfrozen_src41_1.ximg exists
[Fri Oct  7 17:56:19 2011] Fit fullrun_ccd0_acisf10812_pi14-548_cl_pass1_tfrozen_src41 appears to have run properly
[Fri Oct  7 17:56:40 2011] Spatial fit model total counts = 16.484200, observed total counts = 15.000000
[Fri Oct  7 17:56:40 2011] Offset between fit and detection position for source 50 = 0.027352 pixels
[Fri Oct  7 17:56:40 2011] 15.883580 total counts/ 6.480500 bgd. counts: snr = 3.693736
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.027352 pixels
  Position = (1181.6, 702.0) = 22 53 52.20 62 37 46.3
  Extent = 0.5 (0.3-1.1)", rotation angle = 0
  Source counts = 9.4 +/- 4.0
  Background counts = 6.5
  Rate = 0.0004 +/- 0.0002
[Fri Oct  7 17:56:40 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:56:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:56:40 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:56:40 2011] Source does appear to be extended
[Fri Oct  7 17:56:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 17:57:22 2011] Not overwriting source region fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src50_src.reg
[Fri Oct  7 17:57:22 2011] Extracting stamp from image fullrun_ccd0_acisf10812_pi14-548_cl_sm2.00.img.gz, (1160, 681) - (1203, 723)
[Fri Oct  7 17:57:22 2011] Writing fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src50.gif
[Fri Oct  7 18:01:14 2011] ../../acisf10812/products/events/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src50_src.evt and ../../acisf10812/products/events/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src50_bgd.evt exist, delete to re-create
[Fri Oct  7 18:01:14 2011] Size of ../../acisf10812/products/events/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src50_src.evt.gz[events] = 11 counts
[Fri Oct  7 18:01:14 2011] Mean chipx,y = (973.27, 732.09)
[Fri Oct  7 18:01:14 2011] Mean tdetx,y = (3793.09, 4158.73)
[Fri Oct  7 18:01:14 2011] chipx,y range = (950.00-988.00, 717.00-744.00)
[Fri Oct  7 18:01:14 2011] Size of ../../acisf10812/products/events/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src50_bgd.evt.gz[events] = 2 counts
[Fri Oct  7 18:01:14 2011] ../../acisf10812/products/images/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src50_src.img and ../../acisf10812/products/images/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src50_bgd.img exist, delete to re-create
[Fri Oct  7 18:01:14 2011] ../../acisf10812/products/spectra/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src50_src.pi and ../../acisf10812/products/spectra/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src50_bgd.pi exist, delete to re-create
[Fri Oct  7 18:01:14 2011] Not generating rmf since there are only 9 counts
[Fri Oct  7 18:01:18 2011] ../../acisf10812/products/lightcurves/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src50_src.lc and ../../acisf10812/products/lightcurves/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src50_bgd.lc exist, delete to re-create
[Fri Oct  7 18:02:25 2011] 184.21
[Fri Oct  7 18:10:49 2011] Updating aperture counts using extracted products
[Fri Oct  7 18:10:49 2011] Error reading totcts from fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src50_src.pi.gz
[Fri Oct  7 18:10:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 18:10:49 2011] Using photon index=1.80, rate=0.000379, arf fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src50.arf
[Fri Oct  7 18:10:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 18:10:49 2011] Updating source flux to 5.8e-15
[Fri Oct  7 18:11:00 2011] Source 50 has fewer than 100.000000 counts, skipping spectral fitting