[Fri Oct  7 17:53:27 2011] Detection parameters:
  Position = (1056.1, 438.3) = 22 54 1.08 62 35 36.6
  Extent = 0.6" x 0.5", rotation angle = 29 degrees
  Source counts = 11.5 +/- 3.6
  Background counts = 1.5
  Rate = 0.0005 +/- 0.0001

[Fri Oct  7 17:53:29 2011] Off-axis axis estimate = 3.33'
[Fri Oct  7 17:54:56 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:54:56 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Fri Oct  7 17:54:56 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.202
[Fri Oct  7 17:54:56 2011] Giving source the simple spatial ID 38 for pass 0, mean size = 0.65"
[Fri Oct  7 17:54:58 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src38.ximg exists
[Fri Oct  7 17:54:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src38.csv
[Fri Oct  7 17:54:58 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src38_1.ximg exists
[Fri Oct  7 17:54:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src38.csv
[Fri Oct  7 17:54:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10812_pi14-548_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:55:00 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass0_tfrozen_src38.ximg exists
[Fri Oct  7 17:55:00 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass0_tfrozen_src38_1.ximg exists
[Fri Oct  7 17:55:00 2011] Fit fullrun_ccd0_acisf10812_pi14-548_cl_pass0_tfrozen_src38 appears to have run properly
[Fri Oct  7 17:55:26 2011] Spatial fit model total counts = 13.429500, observed total counts = 15.000000
[Fri Oct  7 17:55:26 2011] Offset between fit and detection position for source 42 = 0.997200 pixels
[Fri Oct  7 17:55:26 2011] 13.126140 total counts/ 2.788940 bgd. counts: snr = 6.189896
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.997200 pixels
  Position = (1056.8, 439.0) = 22 54 1.06 62 35 36.8
  Extent = 0.7" x 0.3", rotation angle = 353
  Source counts = 10.3 +/- 3.6
  Background counts = 2.8
  Rate = 0.0004 +/- 0.0001
[Fri Oct  7 17:55:26 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:55:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:55:26 2011] Assessing source extent using major
[Fri Oct  7 17:55:26 2011] Source does appear to be extended
[Fri Oct  7 17:55:26 2011] Computing asymmetry using major and minor axis, asym = 2.12
[Fri Oct  7 17:55:26 2011] Source is asymmetric
[Fri Oct  7 17:56:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 17:56:14 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Fri Oct  7 17:56:14 2011] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.229
[Fri Oct  7 17:56:14 2011] Giving source the simple spatial ID 38 for pass 1, mean size = 0.52"
[Fri Oct  7 17:56:16 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src38.ximg exists
[Fri Oct  7 17:56:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src38.csv
[Fri Oct  7 17:56:16 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src38_1.ximg exists
[Fri Oct  7 17:56:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src38.csv
[Fri Oct  7 17:56:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10812_pi14-548_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 17:56:19 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass1_tfrozen_src38.ximg exists
[Fri Oct  7 17:56:19 2011] fullrun_ccd0_acisf10812_pi14-548_cl_pass1_tfrozen_src38_1.ximg exists
[Fri Oct  7 17:56:19 2011] Fit fullrun_ccd0_acisf10812_pi14-548_cl_pass1_tfrozen_src38 appears to have run properly
[Fri Oct  7 17:56:40 2011] Spatial fit model total counts = 14.985800, observed total counts = 15.000000
[Fri Oct  7 17:56:40 2011] Offset between fit and detection position for source 42 = 0.307391 pixels
[Fri Oct  7 17:56:40 2011] 14.757580 total counts/ 1.508080 bgd. counts: snr = 10.789152
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.307391 pixels
  Position = (1056.5, 438.9) = 22 54 1.08 62 35 36.7
  Extent = 0.7 (0.4-1.1)", rotation angle = 0
  Source counts = 13.2 +/- 3.8
  Background counts = 1.5
  Rate = 0.0005 +/- 0.0002
[Fri Oct  7 17:56:40 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 17:56:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 17:56:40 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 17:56:40 2011] Source does appear to be extended
[Fri Oct  7 17:56:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 17:57:21 2011] Not overwriting source region fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src42_src.reg
[Fri Oct  7 17:57:21 2011] Extracting stamp from image fullrun_ccd0_acisf10812_pi14-548_cl_sm2.00.img.gz, (1023, 406) - (1090, 472)
[Fri Oct  7 17:57:21 2011] Writing fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src42.gif
[Fri Oct  7 18:00:46 2011] ../../acisf10812/products/events/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src42_src.evt and ../../acisf10812/products/events/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src42_bgd.evt exist, delete to re-create
[Fri Oct  7 18:00:46 2011] Size of ../../acisf10812/products/events/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src42_src.evt.gz[events] = 14 counts
[Fri Oct  7 18:00:46 2011] Mean chipx,y = (737.43, 905.50)
[Fri Oct  7 18:00:46 2011] Mean tdetx,y = (3966.50, 4394.57)
[Fri Oct  7 18:00:46 2011] chipx,y range = (720.00-755.00, 890.00-922.00)
[Fri Oct  7 18:00:46 2011] Size of ../../acisf10812/products/events/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src42_bgd.evt.gz[events] = 13 counts
[Fri Oct  7 18:00:46 2011] ../../acisf10812/products/images/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src42_src.img and ../../acisf10812/products/images/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src42_bgd.img exist, delete to re-create
[Fri Oct  7 18:00:46 2011] ../../acisf10812/products/spectra/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src42_src.pi and ../../acisf10812/products/spectra/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src42_bgd.pi exist, delete to re-create
[Fri Oct  7 18:00:46 2011] Not generating rmf since there are only 13 counts
[Fri Oct  7 18:00:51 2011] ../../acisf10812/products/lightcurves/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src42_src.lc and ../../acisf10812/products/lightcurves/fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src42_bgd.lc exist, delete to re-create
[Fri Oct  7 18:02:25 2011] 195.938
[Fri Oct  7 18:10:48 2011] Updating aperture counts using extracted products
[Fri Oct  7 18:10:48 2011] Error reading totcts from fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src42_src.pi.gz
[Fri Oct  7 18:10:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 18:10:49 2011] Using photon index=1.80, rate=0.000534, arf fullrun_ccd0_acisf10812_pi14-548_pass1_cl_src42.arf
[Fri Oct  7 18:10:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 18:10:49 2011] Updating source flux to 7.7e-15
[Fri Oct  7 18:11:00 2011] Source 42 has fewer than 100.000000 counts, skipping spectral fitting