[Sun Sep 25 11:08:37 2011] Detection parameters:
  Position = (616.9, 318.2) = 22 52 53.63 62 30 53.1
  Extent = 1.3" x 0.9", rotation angle = 73 degrees
  Source counts = 100.0 +/- 10.4
  Background counts = 8.0
  Rate = 0.004 +/- 0.0004

[Sun Sep 25 11:08:37 2011] Off-axis axis estimate = 6.82'
[Sun Sep 25 11:10:12 2011] Using EEF radius (= 2.07 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:10:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 11:10:12 2011] Initial guess for spatial extent in simple fitting = 2.07"
[Sun Sep 25 11:10:12 2011] source mask rpix=4.2, npix_max = 88, mask sum = 90, frac = 1.014
[Sun Sep 25 11:10:12 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 2.07"
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src4.ximg exists
[Sun Sep 25 11:10:13 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src4.csv
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src4_1.ximg exists
[Sun Sep 25 11:10:13 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src4.csv
[Sun Sep 25 11:10:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Sep 25 11:10:13 2011] Fit fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Sep 25 11:10:47 2011] Spatial fit model total counts = 104.946000, observed total counts = 105.000000
[Sun Sep 25 11:10:47 2011] Offset between fit and detection position for source 45 = 0.809209 pixels
[Sun Sep 25 11:10:47 2011] 104.378000 total counts/ 10.473700 bgd. counts: snr = 29.015858
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.809209 pixels
  Position = (617.5, 318.7) = 22 52 53.62 62 30 53.1
  Extent = 1.6 (1.3-1.9)", rotation angle = 0
  Source counts = 93.9 +/- 10.2
  Background counts = 10.5
  Rate = 0.004 +/- 0.0004
[Sun Sep 25 11:10:47 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:10:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:10:47 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:10:47 2011] Source does appear to be extended
[Sun Sep 25 11:10:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:11:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:11:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 11:11:24 2011] Initial guess for spatial extent in simple fitting = 1.61"
[Sun Sep 25 11:11:24 2011] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.857
[Sun Sep 25 11:11:24 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 1.61"
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src4.ximg exists
[Sun Sep 25 11:11:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src4.csv
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src4_1.ximg exists
[Sun Sep 25 11:11:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src4.csv
[Sun Sep 25 11:11:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Sep 25 11:11:26 2011] Fit fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Sep 25 11:11:56 2011] Spatial fit model total counts = 99.997200, observed total counts = 100.000000
[Sun Sep 25 11:11:56 2011] Offset between fit and detection position for source 45 = 0.342336 pixels
[Sun Sep 25 11:11:56 2011] 100.376700 total counts/ 14.772700 bgd. counts: snr = 22.272251
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.342336 pixels
  Position = (617.4, 318.4) = 22 52 53.63 62 30 52.9
  Extent = 1.5 (1.1-1.8)", rotation angle = 0
  Source counts = 85.6 +/- 10.0
  Background counts = 14.8
  Rate = 0.004 +/- 0.0004
[Sun Sep 25 11:11:56 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:11:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:11:56 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:11:56 2011] Source does appear to be extended
[Sun Sep 25 11:11:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:20:44 2011] Not overwriting source region fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src45_src.reg
[Sun Sep 25 11:20:44 2011] Extracting stamp from image fullrun_ccd3_acisf10811_pi14-548_cl_sm2.00.img.gz, (550, 251) - (685, 386)
[Sun Sep 25 11:20:44 2011] Writing fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src45.gif
[Sun Sep 25 11:20:55 2011] ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src45_src.evt and ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src45_bgd.evt exist, delete to re-create
[Sun Sep 25 11:20:55 2011] Size of ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src45_src.evt.gz[events] = 101 counts
[Sun Sep 25 11:20:55 2011] Mean chipx,y = (743.64, 214.50)
[Sun Sep 25 11:20:55 2011] Mean tdetx,y = (4917.50, 3804.64)
[Sun Sep 25 11:20:55 2011] chipx,y range = (720.00-767.00, 191.00-239.00)
[Sun Sep 25 11:20:55 2011] Size of ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src45_bgd.evt.gz[events] = 46 counts
[Sun Sep 25 11:20:55 2011] ../../acisf10811/products/images/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src45_src.img and ../../acisf10811/products/images/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src45_bgd.img exist, delete to re-create
[Sun Sep 25 11:20:55 2011] ../../acisf10811/products/spectra/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src45_src.pi and ../../acisf10811/products/spectra/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src45_bgd.pi exist, delete to re-create
[Sun Sep 25 11:20:55 2011] Not generating rmf since there are only 85 counts
[Sun Sep 25 11:21:01 2011] ../../acisf10811/products/lightcurves/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src45_src.lc and ../../acisf10811/products/lightcurves/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src45_bgd.lc exist, delete to re-create
[Sun Sep 25 11:22:31 2011] 178.973
[Sun Sep 25 11:22:46 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:22:46 2011] Error reading totcts from fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src45_src.pi.gz
[Sun Sep 25 11:22:47 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:22:47 2011] Using photon index=1.80, rate=0.00351, arf fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src45.arf
[Sun Sep 25 11:22:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:22:47 2011] Updating source flux to 5.4e-14
[Sun Sep 25 11:23:31 2011] Source 45 has fewer than 100.000000 counts, skipping spectral fitting