[Sun Sep 25 11:08:33 2011] Detection parameters:
  Position = (458.9, 1076.9) = 22 53 4.77 62 37 6.5
  Extent = 0.6" x 0.5", rotation angle = 120 degrees
  Source counts = 87.0 +/- 9.4
  Background counts = 2.0
  Rate = 0.004 +/- 0.0004

[Sun Sep 25 11:08:37 2011] Off-axis axis estimate = 3.35'
[Sun Sep 25 11:10:12 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:10:12 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sun Sep 25 11:10:12 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.190
[Sun Sep 25 11:10:12 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.66"
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src5.ximg exists
[Sun Sep 25 11:10:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src5.csv
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src5_1.ximg exists
[Sun Sep 25 11:10:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src5.csv
[Sun Sep 25 11:10:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Sep 25 11:10:13 2011] Fit fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Sep 25 11:10:47 2011] Spatial fit model total counts = 97.137400, observed total counts = 99.000000
[Sun Sep 25 11:10:47 2011] Offset between fit and detection position for source 29 = 0.771391 pixels
[Sun Sep 25 11:10:47 2011] 98.162700 total counts/ 20.845600 bgd. counts: snr = 16.934343
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.771391 pixels
  Position = (459.4, 1077.5) = 22 53 4.76 62 37 6.6
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 77.3 +/- 9.9
  Background counts = 20.8
  Rate = 0.003 +/- 0.0004
[Sun Sep 25 11:10:47 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:10:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:10:47 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:10:47 2011] Source does appear to be extended
[Sun Sep 25 11:10:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:11:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:11:24 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sun Sep 25 11:11:24 2011] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.667
[Sun Sep 25 11:11:24 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.66"
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src5.ximg exists
[Sun Sep 25 11:11:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src5.csv
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src5_1.ximg exists
[Sun Sep 25 11:11:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src5.csv
[Sun Sep 25 11:11:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Sep 25 11:11:26 2011] Fit fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Sep 25 11:11:56 2011] Spatial fit model total counts = 97.227700, observed total counts = 98.000000
[Sun Sep 25 11:11:56 2011] Offset between fit and detection position for source 29 = 0.002786 pixels
[Sun Sep 25 11:11:56 2011] 97.767700 total counts/ 19.063900 bgd. counts: snr = 18.025604
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.002786 pixels
  Position = (459.4, 1077.5) = 22 53 4.76 62 37 6.6
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 78.7 +/- 9.9
  Background counts = 19.1
  Rate = 0.003 +/- 0.0004
[Sun Sep 25 11:11:56 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:11:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:11:56 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:11:56 2011] Source does appear to be extended
[Sun Sep 25 11:11:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:20:44 2011] Not overwriting source region fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src29_src.reg
[Sun Sep 25 11:20:44 2011] Extracting stamp from image fullrun_ccd3_acisf10811_pi14-548_cl_sm2.00.img.gz, (430, 1048) - (489, 1107)
[Sun Sep 25 11:20:44 2011] Writing fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src29.gif
[Sun Sep 25 11:21:01 2011] ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src29_src.evt and ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Sun Sep 25 11:21:01 2011] Size of ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src29_src.evt.gz[events] = 85 counts
[Sun Sep 25 11:21:01 2011] Mean chipx,y = (545.09, 963.13)
[Sun Sep 25 11:21:01 2011] Mean tdetx,y = (4168.87, 3606.09)
[Sun Sep 25 11:21:01 2011] chipx,y range = (526.00-563.00, 945.00-981.00)
[Sun Sep 25 11:21:01 2011] Size of ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 15 counts
[Sun Sep 25 11:21:01 2011] ../../acisf10811/products/images/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src29_src.img and ../../acisf10811/products/images/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Sun Sep 25 11:21:01 2011] ../../acisf10811/products/spectra/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src29_src.pi and ../../acisf10811/products/spectra/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Sun Sep 25 11:21:01 2011] Not generating rmf since there are only 78 counts
[Sun Sep 25 11:21:05 2011] ../../acisf10811/products/lightcurves/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src29_src.lc and ../../acisf10811/products/lightcurves/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Sun Sep 25 11:22:31 2011] 182.834
[Sun Sep 25 11:22:46 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:22:46 2011] Error reading totcts from fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src29_src.pi.gz
[Sun Sep 25 11:22:47 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:22:47 2011] Using photon index=1.80, rate=0.00323, arf fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src29.arf
[Sun Sep 25 11:22:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:22:47 2011] Updating source flux to 5e-14
[Sun Sep 25 11:23:31 2011] Source 29 has fewer than 100.000000 counts, skipping spectral fitting