[Sun Sep 25 11:08:32 2011] Detection parameters:
  Position = (611.8, 939.5) = 22 52 53.88 62 35 58.8
  Extent = 0.5" x 0.5", rotation angle = 74 degrees
  Source counts = 41.6 +/- 6.6
  Background counts = 1.4
  Rate = 0.002 +/- 0.0003

[Sun Sep 25 11:08:37 2011] Off-axis axis estimate = 4.43'
[Sun Sep 25 11:10:12 2011] Using EEF radius (= 0.97 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:10:12 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Sun Sep 25 11:10:12 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Sun Sep 25 11:10:12 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.97"
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src9.ximg exists
[Sun Sep 25 11:10:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src9.csv
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Sep 25 11:10:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src9.csv
[Sun Sep 25 11:10:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:10:14 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Sep 25 11:10:14 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Sep 25 11:10:14 2011] Fit fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Sep 25 11:10:47 2011] Spatial fit model total counts = 42.524500, observed total counts = 45.000000
[Sun Sep 25 11:10:47 2011] Offset between fit and detection position for source 27 = 0.869525 pixels
[Sun Sep 25 11:10:47 2011] 42.669950 total counts/ 4.359850 bgd. counts: snr = 18.347526
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.869525 pixels
  Position = (612.4, 940.1) = 22 52 53.88 62 35 58.8
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 38.3 +/- 6.5
  Background counts = 4.4
  Rate = 0.002 +/- 0.0003
[Sun Sep 25 11:10:47 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:10:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:10:47 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:10:47 2011] Source does appear to be extended
[Sun Sep 25 11:10:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:11:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:11:24 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sun Sep 25 11:11:24 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.880
[Sun Sep 25 11:11:24 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.66"
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src9.ximg exists
[Sun Sep 25 11:11:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src9.csv
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Sep 25 11:11:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src9.csv
[Sun Sep 25 11:11:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:11:27 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Sep 25 11:11:27 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Sep 25 11:11:27 2011] Fit fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Sep 25 11:11:56 2011] Spatial fit model total counts = 45.227000, observed total counts = 46.000000
[Sun Sep 25 11:11:56 2011] Offset between fit and detection position for source 27 = 0.038826 pixels
[Sun Sep 25 11:11:56 2011] 44.626350 total counts/ 6.736850 bgd. counts: snr = 14.597902
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.038826 pixels
  Position = (612.4, 940.1) = 22 52 53.88 62 35 58.8
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 37.9 +/- 6.7
  Background counts = 6.7
  Rate = 0.002 +/- 0.0003
[Sun Sep 25 11:11:56 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:11:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:11:56 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:11:56 2011] Source does appear to be extended
[Sun Sep 25 11:11:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:20:44 2011] Not overwriting source region fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src27_src.reg
[Sun Sep 25 11:20:44 2011] Extracting stamp from image fullrun_ccd3_acisf10811_pi14-548_cl_sm2.00.img.gz, (582, 910) - (643, 970)
[Sun Sep 25 11:20:44 2011] Writing fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src27.gif
[Sun Sep 25 11:21:15 2011] ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src27_src.evt and ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src27_bgd.evt exist, delete to re-create
[Sun Sep 25 11:21:15 2011] Size of ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src27_src.evt.gz[events] = 41 counts
[Sun Sep 25 11:21:15 2011] Mean chipx,y = (469.63, 767.85)
[Sun Sep 25 11:21:15 2011] Mean tdetx,y = (4364.15, 3530.63)
[Sun Sep 25 11:21:15 2011] chipx,y range = (450.00-486.00, 753.00-791.00)
[Sun Sep 25 11:21:15 2011] Size of ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 7 counts
[Sun Sep 25 11:21:15 2011] ../../acisf10811/products/images/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src27_src.img and ../../acisf10811/products/images/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src27_bgd.img exist, delete to re-create
[Sun Sep 25 11:21:15 2011] ../../acisf10811/products/spectra/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src27_src.pi and ../../acisf10811/products/spectra/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src27_bgd.pi exist, delete to re-create
[Sun Sep 25 11:21:15 2011] Not generating rmf since there are only 37 counts
[Sun Sep 25 11:21:18 2011] ../../acisf10811/products/lightcurves/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src27_src.lc and ../../acisf10811/products/lightcurves/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src27_bgd.lc exist, delete to re-create
[Sun Sep 25 11:22:31 2011] 181.25
[Sun Sep 25 11:22:46 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:22:46 2011] Error reading totcts from fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src27_src.pi.gz
[Sun Sep 25 11:22:47 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:22:47 2011] Using photon index=1.80, rate=0.00155, arf fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src27.arf
[Sun Sep 25 11:22:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:22:47 2011] Updating source flux to 2.4e-14
[Sun Sep 25 11:23:31 2011] Source 27 has fewer than 100.000000 counts, skipping spectral fitting