[Sun Sep 25 11:08:30 2011] Detection parameters:
  Position = (434.3, 935.2) = 22 53 6.53 62 35 56.8
  Extent = 0.6" x 0.5", rotation angle = 77 degrees
  Source counts = 123.2 +/- 11.2
  Background counts = 1.8
  Rate = 0.005 +/- 0.0005

[Sun Sep 25 11:08:37 2011] Off-axis axis estimate = 2.97'
[Sun Sep 25 11:10:12 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:10:12 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Sun Sep 25 11:10:12 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.809
[Sun Sep 25 11:10:12 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.57"
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src3.ximg exists
[Sun Sep 25 11:10:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src3.csv
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Sep 25 11:10:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src3.csv
[Sun Sep 25 11:10:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Sep 25 11:10:13 2011] Fit fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Sep 25 11:10:47 2011] Spatial fit model total counts = 129.960000, observed total counts = 130.000000
[Sun Sep 25 11:10:47 2011] Offset between fit and detection position for source 2 = 0.851198 pixels
[Sun Sep 25 11:10:47 2011] 129.635700 total counts/ 10.977700 bgd. counts: snr = 35.813053
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.851198 pixels
  Position = (434.9, 935.9) = 22 53 6.53 62 35 56.9
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 118.7 +/- 11.4
  Background counts = 11.0
  Rate = 0.005 +/- 0.0005
[Sun Sep 25 11:10:47 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:10:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:10:47 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:10:47 2011] Source does appear to be extended
[Sun Sep 25 11:10:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:11:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:11:24 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Sun Sep 25 11:11:24 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.373
[Sun Sep 25 11:11:24 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.59"
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src3.ximg exists
[Sun Sep 25 11:11:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src3.csv
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Sep 25 11:11:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src3.csv
[Sun Sep 25 11:11:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Sep 25 11:11:26 2011] Fit fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Sep 25 11:11:56 2011] Spatial fit model total counts = 128.923000, observed total counts = 129.000000
[Sun Sep 25 11:11:56 2011] Offset between fit and detection position for source 2 = 0.005847 pixels
[Sun Sep 25 11:11:56 2011] 128.247730 total counts/ 9.646730 bgd. counts: snr = 38.185483
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.005847 pixels
  Position = (434.9, 935.9) = 22 53 6.53 62 35 56.9
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 118.6 +/- 11.3
  Background counts = 9.6
  Rate = 0.005 +/- 0.0005
[Sun Sep 25 11:11:56 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:11:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:11:56 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:11:56 2011] Source does appear to be extended
[Sun Sep 25 11:11:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:20:44 2011] Not overwriting source region fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src2_src.reg
[Sun Sep 25 11:20:44 2011] Extracting stamp from image fullrun_ccd3_acisf10811_pi14-548_cl_sm2.00.img.gz, (408, 909) - (462, 963)
[Sun Sep 25 11:20:44 2011] Writing fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src2.gif
[Sun Sep 25 11:20:52 2011] ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src2_src.evt and ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Sep 25 11:20:52 2011] Size of ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src2_src.evt.gz[events] = 123 counts
[Sun Sep 25 11:20:52 2011] Mean chipx,y = (626.40, 848.73)
[Sun Sep 25 11:20:52 2011] Mean tdetx,y = (4283.27, 3687.40)
[Sun Sep 25 11:20:52 2011] chipx,y range = (610.00-641.00, 830.00-868.00)
[Sun Sep 25 11:20:52 2011] Size of ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 17 counts
[Sun Sep 25 11:20:52 2011] ../../acisf10811/products/images/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src2_src.img and ../../acisf10811/products/images/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Sep 25 11:20:52 2011] ../../acisf10811/products/spectra/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src2_src.pi and ../../acisf10811/products/spectra/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Sep 25 11:20:55 2011] ../../acisf10811/products/lightcurves/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src2_src.lc and ../../acisf10811/products/lightcurves/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Sep 25 11:22:31 2011] Keeping rmf generated by specextract
[Sun Sep 25 11:22:31 2011] 159.849
[Sun Sep 25 11:22:46 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:22:46 2011] Error reading totcts from fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Sep 25 11:22:47 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:22:47 2011] Using photon index=1.80, rate=0.00486, arf fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src2.arf
[Sun Sep 25 11:22:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:22:47 2011] Updating source flux to 8.6e-14