[Sun Sep 25 11:08:31 2011] Detection parameters:
  Position = (155.0, 759.5) = 22 53 26.45 62 34 30.5
  Extent = 0.5" x 0.5", rotation angle = 49 degrees
  Source counts = 29.0 +/- 5.5
  Background counts = 1.0
  Rate = 0.001 +/- 0.0002

[Sun Sep 25 11:08:37 2011] Off-axis axis estimate = 1.67'
[Sun Sep 25 11:10:12 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:10:12 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sun Sep 25 11:10:12 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.863
[Sun Sep 25 11:10:12 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.40"
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src13.ximg exists
[Sun Sep 25 11:10:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src13.csv
[Sun Sep 25 11:10:13 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src13_1.ximg exists
[Sun Sep 25 11:10:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src13.csv
[Sun Sep 25 11:10:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10811_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:10:16 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sun Sep 25 11:10:16 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Sep 25 11:10:16 2011] Fit fullrun_ccd3_acisf10811_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Sep 25 11:10:47 2011] Spatial fit model total counts = 34.218300, observed total counts = 35.000000
[Sun Sep 25 11:10:47 2011] Offset between fit and detection position for source 15 = 0.896398 pixels
[Sun Sep 25 11:10:47 2011] 34.683740 total counts/ 7.566440 bgd. counts: snr = 9.858269
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.896398 pixels
  Position = (155.6, 760.1) = 22 53 26.44 62 34 30.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 27.1 +/- 5.9
  Background counts = 7.6
  Rate = 0.001 +/- 0.0002
[Sun Sep 25 11:10:47 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:10:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:10:47 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:10:47 2011] Source does appear to be extended
[Sun Sep 25 11:10:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:11:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:11:24 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Sun Sep 25 11:11:24 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.123
[Sun Sep 25 11:11:24 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.45"
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src13.ximg exists
[Sun Sep 25 11:11:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src13.csv
[Sun Sep 25 11:11:26 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src13_1.ximg exists
[Sun Sep 25 11:11:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src13.csv
[Sun Sep 25 11:11:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10811_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:11:27 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sun Sep 25 11:11:27 2011] fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Sep 25 11:11:27 2011] Fit fullrun_ccd3_acisf10811_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Sep 25 11:11:56 2011] Spatial fit model total counts = 34.997100, observed total counts = 35.000000
[Sun Sep 25 11:11:56 2011] Offset between fit and detection position for source 15 = 0.001059 pixels
[Sun Sep 25 11:11:56 2011] 35.224950 total counts/ 7.200550 bgd. counts: snr = 10.443678
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.001059 pixels
  Position = (155.6, 760.2) = 22 53 26.44 62 34 30.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 28.0 +/- 5.9
  Background counts = 7.2
  Rate = 0.001 +/- 0.0002
[Sun Sep 25 11:11:56 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:11:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:11:56 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:11:56 2011] Source does appear to be extended
[Sun Sep 25 11:11:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:20:44 2011] Not overwriting source region fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src15_src.reg
[Sun Sep 25 11:20:44 2011] Extracting stamp from image fullrun_ccd3_acisf10811_pi14-548_cl_sm2.00.img.gz, (135, 739) - (176, 781)
[Sun Sep 25 11:20:44 2011] Writing fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src15.gif
[Sun Sep 25 11:21:26 2011] ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src15_src.evt and ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sun Sep 25 11:21:27 2011] Size of ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src15_src.evt.gz[events] = 29 counts
[Sun Sep 25 11:21:27 2011] Mean chipx,y = (958.97, 818.59)
[Sun Sep 25 11:21:27 2011] Mean tdetx,y = (4313.41, 4019.97)
[Sun Sep 25 11:21:27 2011] chipx,y range = (941.00-974.00, 801.00-835.00)
[Sun Sep 25 11:21:27 2011] Size of ../../acisf10811/products/events/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 11 counts
[Sun Sep 25 11:21:27 2011] ../../acisf10811/products/images/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src15_src.img and ../../acisf10811/products/images/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Sun Sep 25 11:21:27 2011] ../../acisf10811/products/spectra/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src15_src.pi and ../../acisf10811/products/spectra/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sun Sep 25 11:21:27 2011] Not generating rmf since there are only 28 counts
[Sun Sep 25 11:21:29 2011] ../../acisf10811/products/lightcurves/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src15_src.lc and ../../acisf10811/products/lightcurves/fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sun Sep 25 11:22:31 2011] 202.389
[Sun Sep 25 11:22:46 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:22:46 2011] Error reading totcts from fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src15_src.pi.gz
[Sun Sep 25 11:22:47 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:22:47 2011] Using photon index=1.80, rate=0.00115, arf fullrun_ccd3_acisf10811_pi14-548_pass1_cl_src15.arf
[Sun Sep 25 11:22:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:22:47 2011] Updating source flux to 1.6e-14
[Sun Sep 25 11:23:31 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting