[Sun Sep 25 11:08:23 2011] Detection parameters:
  Position = (213.8, 945.2) = 22 53 55.06 62 43 36.9
  Extent = 1.4" x 0.9", rotation angle = 148 degrees
  Source counts = 1651.3 +/- 42.4
  Background counts = 145.7
  Rate = 0.07 +/- 0.002

[Sun Sep 25 11:08:26 2011] Off-axis axis estimate = 8.01'
[Sun Sep 25 11:10:10 2011] Using EEF radius (= 2.84 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:10:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 11:10:10 2011] Initial guess for spatial extent in simple fitting = 2.84"
[Sun Sep 25 11:10:10 2011] source mask rpix=5.8, npix_max = 157, mask sum = 144, frac = 0.916
[Sun Sep 25 11:10:10 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.84"
[Sun Sep 25 11:10:11 2011] fullrun_ccd2_acisf10811_pi14-548_cl_pass0_src1.ximg exists
[Sun Sep 25 11:10:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10811_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 11:10:11 2011] fullrun_ccd2_acisf10811_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Sep 25 11:10:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10811_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 11:10:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10811_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10811_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:10:11 2011] fullrun_ccd2_acisf10811_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 11:10:11 2011] fullrun_ccd2_acisf10811_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 11:10:11 2011] Fit fullrun_ccd2_acisf10811_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 11:10:43 2011] Spatial fit model total counts = 1859.600000, observed total counts = 1867.000000
[Sun Sep 25 11:10:43 2011] Offset between fit and detection position for source 1 = 0.783050 pixels
[Sun Sep 25 11:10:43 2011] 1855.909000 total counts/ 132.329000 bgd. counts: snr = 149.831777
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.783050 pixels
  Position = (214.1, 945.9) = 22 53 55.08 62 43 37.0
  Extent = 3.1 (3.0-3.2)", rotation angle = 0
  Source counts = 1723.6 +/- 43.1
  Background counts = 132.3
  Rate = 0.07 +/- 0.002
[Sun Sep 25 11:10:43 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:10:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:10:43 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:10:43 2011] Source does appear to be extended
[Sun Sep 25 11:10:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:11:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:11:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 11:11:21 2011] Initial guess for spatial extent in simple fitting = 3.08"
[Sun Sep 25 11:11:21 2011] source mask rpix=6.3, npix_max = 183, mask sum = 196, frac = 1.071
[Sun Sep 25 11:11:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.08"
[Sun Sep 25 11:11:23 2011] fullrun_ccd2_acisf10811_pi14-548_cl_pass1_src1.ximg exists
[Sun Sep 25 11:11:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10811_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 11:11:23 2011] fullrun_ccd2_acisf10811_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Sep 25 11:11:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10811_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 11:11:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10811_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10811_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:11:23 2011] fullrun_ccd2_acisf10811_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 11:11:23 2011] fullrun_ccd2_acisf10811_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 11:11:23 2011] Fit fullrun_ccd2_acisf10811_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 11:11:53 2011] Spatial fit model total counts = 1872.730000, observed total counts = 1880.000000
[Sun Sep 25 11:11:53 2011] Offset between fit and detection position for source 1 = 0.056493 pixels
[Sun Sep 25 11:11:53 2011] 1869.355000 total counts/ 125.375000 bgd. counts: snr = 155.752859
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.056493 pixels
  Position = (214.0, 945.9) = 22 53 55.08 62 43 37.0
  Extent = 3.1 (3.0-3.2)", rotation angle = 0
  Source counts = 1744.0 +/- 43.2
  Background counts = 125.4
  Rate = 0.07 +/- 0.002
[Sun Sep 25 11:11:53 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:11:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:11:53 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:11:53 2011] Source does appear to be extended
[Sun Sep 25 11:11:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:18:44 2011] Not overwriting source region fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1_src.reg
[Sun Sep 25 11:18:44 2011] Extracting stamp from image fullrun_ccd2_acisf10811_pi14-548_cl_sm2.00.img.gz, (72, 803) - (356, 1088)
[Sun Sep 25 11:18:44 2011] Writing fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1.gif
[Sun Sep 25 11:18:46 2011] ../../acisf10811/products/events/fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1_src.evt and ../../acisf10811/products/events/fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Sep 25 11:18:46 2011] Size of ../../acisf10811/products/events/fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1872 counts
[Sun Sep 25 11:18:46 2011] Mean chipx,y = (211.10, 78.89)
[Sun Sep 25 11:18:46 2011] Mean tdetx,y = (3139.89, 3874.90)
[Sun Sep 25 11:18:46 2011] chipx,y range = (171.00-244.00, 37.00-114.00)
[Sun Sep 25 11:18:46 2011] Size of ../../acisf10811/products/events/fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 216 counts
[Sun Sep 25 11:18:46 2011] ../../acisf10811/products/images/fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1_src.img and ../../acisf10811/products/images/fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Sep 25 11:18:46 2011] ../../acisf10811/products/spectra/fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1_src.pi and ../../acisf10811/products/spectra/fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Sep 25 11:18:49 2011] ../../acisf10811/products/lightcurves/fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1_src.lc and ../../acisf10811/products/lightcurves/fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Sep 25 11:20:42 2011] Keeping rmf generated by specextract
[Sun Sep 25 11:20:42 2011] 159.153
[Sun Sep 25 11:22:45 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:22:45 2011] Error reading totcts from fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Sep 25 11:22:46 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:22:46 2011] Using photon index=1.80, rate=0.0715, arf fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1.arf
[Sun Sep 25 11:22:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:22:46 2011] Updating source flux to 1.2e-12
[Sun Sep 25 11:23:31 2011] Reading fit data from acisf10811/analysis//spectral/fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1_pl.csv
[Sun Sep 25 11:23:31 2011] Spectral fit parameter nH value = 2.06222e+22
[Sun Sep 25 11:23:31 2011] Spectral fit parameter PhoIndex value = 1.43274
[Sun Sep 25 11:23:31 2011] Failed to get F(0.3-8.0) from acisf10811/analysis//spectral/fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 11:23:31 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:23:31 2011] Using Nh = 2.1e+22, photon index=1.43, rate=0.0715, arf fullrun_ccd2_acisf10811_pi14-548_pass1_cl_src1.arf
[Sun Sep 25 11:23:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:23:31 2011] Updating source flux to 1.8e-12