[Sun Sep 25 11:08:21 2011] Detection parameters:
  Position = (950.3, 1114.3) = 22 53 36.53 62 33 34.4
  Extent = 0.5" x 0.5", rotation angle = 48 degrees
  Source counts = 29.3 +/- 5.5
  Background counts = 0.7
  Rate = 0.001 +/- 0.0002

[Sun Sep 25 11:08:23 2011] Off-axis axis estimate = 2.51'
[Sun Sep 25 11:10:07 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:10:07 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Sun Sep 25 11:10:07 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.994
[Sun Sep 25 11:10:07 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.49"
[Sun Sep 25 11:10:08 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass0_src13.ximg exists
[Sun Sep 25 11:10:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10811_pi14-548_cl_pass0_src13.csv
[Sun Sep 25 11:10:08 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass0_src13_1.ximg exists
[Sun Sep 25 11:10:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10811_pi14-548_cl_pass0_src13.csv
[Sun Sep 25 11:10:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10811_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10811_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:10:10 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sun Sep 25 11:10:10 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Sep 25 11:10:10 2011] Fit fullrun_ccd1_acisf10811_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Sep 25 11:10:39 2011] Spatial fit model total counts = 34.129000, observed total counts = 36.000000
[Sun Sep 25 11:10:39 2011] Offset between fit and detection position for source 17 = 0.565600 pixels
[Sun Sep 25 11:10:39 2011] 34.275980 total counts/ 5.929280 bgd. counts: snr = 11.641301
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.565600 pixels
  Position = (950.7, 1114.7) = 22 53 36.54 62 33 34.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 28.3 +/- 5.9
  Background counts = 5.9
  Rate = 0.001 +/- 0.0002
[Sun Sep 25 11:10:39 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:10:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:10:39 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:10:39 2011] Source does appear to be extended
[Sun Sep 25 11:10:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:11:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:11:20 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Sun Sep 25 11:11:20 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.045
[Sun Sep 25 11:11:20 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.48"
[Sun Sep 25 11:11:21 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass1_src13.ximg exists
[Sun Sep 25 11:11:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10811_pi14-548_cl_pass1_src13.csv
[Sun Sep 25 11:11:21 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass1_src13_1.ximg exists
[Sun Sep 25 11:11:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10811_pi14-548_cl_pass1_src13.csv
[Sun Sep 25 11:11:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10811_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10811_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:11:21 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sun Sep 25 11:11:21 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Sep 25 11:11:21 2011] Fit fullrun_ccd1_acisf10811_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Sep 25 11:11:49 2011] Spatial fit model total counts = 34.129700, observed total counts = 36.000000
[Sun Sep 25 11:11:49 2011] Offset between fit and detection position for source 17 = 0.000359 pixels
[Sun Sep 25 11:11:49 2011] 34.276670 total counts/ 5.927570 bgd. counts: snr = 11.643966
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.000359 pixels
  Position = (950.7, 1114.7) = 22 53 36.54 62 33 34.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 28.3 +/- 5.9
  Background counts = 5.9
  Rate = 0.001 +/- 0.0002
[Sun Sep 25 11:11:49 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:11:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:11:49 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:11:49 2011] Source does appear to be extended
[Sun Sep 25 11:11:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:16:52 2011] Not overwriting source region fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src17_src.reg
[Sun Sep 25 11:16:52 2011] Extracting stamp from image fullrun_ccd1_acisf10811_pi14-548_cl_sm2.00.img.gz, (929, 1093) - (972, 1137)
[Sun Sep 25 11:16:52 2011] Writing fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src17.gif
[Sun Sep 25 11:17:35 2011] ../../acisf10811/products/events/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src17_src.evt and ../../acisf10811/products/events/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Sun Sep 25 11:17:35 2011] Size of ../../acisf10811/products/events/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src17_src.evt.gz[events] = 29 counts
[Sun Sep 25 11:17:35 2011] Mean chipx,y = (91.17, 779.79)
[Sun Sep 25 11:17:35 2011] Mean tdetx,y = (4352.21, 4198.17)
[Sun Sep 25 11:17:35 2011] chipx,y range = (73.00-106.00, 766.00-798.00)
[Sun Sep 25 11:17:35 2011] Size of ../../acisf10811/products/events/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 12 counts
[Sun Sep 25 11:17:35 2011] ../../acisf10811/products/images/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src17_src.img and ../../acisf10811/products/images/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Sun Sep 25 11:17:35 2011] ../../acisf10811/products/spectra/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src17_src.pi and ../../acisf10811/products/spectra/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Sun Sep 25 11:17:35 2011] Not generating rmf since there are only 28 counts
[Sun Sep 25 11:17:38 2011] ../../acisf10811/products/lightcurves/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src17_src.lc and ../../acisf10811/products/lightcurves/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Sun Sep 25 11:18:44 2011] 187.061
[Sun Sep 25 11:22:45 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:22:45 2011] Error reading totcts from fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src17_src.pi.gz
[Sun Sep 25 11:22:45 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:22:45 2011] Using photon index=1.80, rate=0.00116, arf fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src17.arf
[Sun Sep 25 11:22:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:22:45 2011] Updating source flux to 1.8e-14
[Sun Sep 25 11:23:04 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting