[Sun Sep 25 11:08:21 2011] Detection parameters:
  Position = (687.2, 1089.7) = 22 53 55.26 62 33 22.1
  Extent = 0.6" x 0.5", rotation angle = 10 degrees
  Source counts = 18.3 +/- 4.4
  Background counts = 0.7
  Rate = 0.0008 +/- 0.0002

[Sun Sep 25 11:08:23 2011] Off-axis axis estimate = 3.75'
[Sun Sep 25 11:10:07 2011] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:10:07 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Sun Sep 25 11:10:07 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.959
[Sun Sep 25 11:10:07 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.76"
[Sun Sep 25 11:10:09 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass0_src19.ximg exists
[Sun Sep 25 11:10:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10811_pi14-548_cl_pass0_src19.csv
[Sun Sep 25 11:10:09 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass0_src19_1.ximg exists
[Sun Sep 25 11:10:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10811_pi14-548_cl_pass0_src19.csv
[Sun Sep 25 11:10:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10811_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10811_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:10:10 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Sun Sep 25 11:10:10 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Sep 25 11:10:10 2011] Fit fullrun_ccd1_acisf10811_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Sep 25 11:10:39 2011] Spatial fit model total counts = 19.852200, observed total counts = 21.000000
[Sun Sep 25 11:10:39 2011] Offset between fit and detection position for source 15 = 0.718079 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.718079 pixels
  Position = (687.7, 1090.2) = 22 53 55.26 62 33 22.1
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 20.4 +/- 4.5
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Sun Sep 25 11:10:39 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:10:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:10:39 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:10:39 2011] Source does appear to be extended
[Sun Sep 25 11:10:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:11:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:11:20 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Sun Sep 25 11:11:20 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.107
[Sun Sep 25 11:11:20 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.69"
[Sun Sep 25 11:11:21 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass1_src19.ximg exists
[Sun Sep 25 11:11:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10811_pi14-548_cl_pass1_src19.csv
[Sun Sep 25 11:11:21 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass1_src19_1.ximg exists
[Sun Sep 25 11:11:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10811_pi14-548_cl_pass1_src19.csv
[Sun Sep 25 11:11:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10811_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10811_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:11:21 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Sun Sep 25 11:11:21 2011] fullrun_ccd1_acisf10811_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Sep 25 11:11:21 2011] Fit fullrun_ccd1_acisf10811_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Sep 25 11:11:49 2011] Spatial fit model total counts = 19.275000, observed total counts = 21.000000
[Sun Sep 25 11:11:49 2011] Offset between fit and detection position for source 15 = 0.121922 pixels
[Sun Sep 25 11:11:49 2011] 19.464177 total counts/ 0.052577 bgd. counts: snr = 84.657109
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.121922 pixels
  Position = (687.9, 1090.1) = 22 53 55.25 62 33 22.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 19.4 +/- 4.4
  Background counts = 0.1
  Rate = 0.0008 +/- 0.0002
[Sun Sep 25 11:11:49 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:11:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:11:49 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:11:49 2011] Source does appear to be extended
[Sun Sep 25 11:11:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:16:52 2011] Not overwriting source region fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src15_src.reg
[Sun Sep 25 11:16:52 2011] Extracting stamp from image fullrun_ccd1_acisf10811_pi14-548_cl_sm2.00.img.gz, (660, 1063) - (715, 1118)
[Sun Sep 25 11:16:52 2011] Writing fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src15.gif
[Sun Sep 25 11:17:52 2011] ../../acisf10811/products/events/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src15_src.evt and ../../acisf10811/products/events/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sun Sep 25 11:17:52 2011] Size of ../../acisf10811/products/events/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src15_src.evt.gz[events] = 19 counts
[Sun Sep 25 11:17:52 2011] Mean chipx,y = (336.26, 875.89)
[Sun Sep 25 11:17:52 2011] Mean tdetx,y = (4256.11, 4443.26)
[Sun Sep 25 11:17:52 2011] chipx,y range = (319.00-355.00, 859.00-892.00)
[Sun Sep 25 11:17:52 2011] Size of ../../acisf10811/products/events/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 6 counts
[Sun Sep 25 11:17:52 2011] ../../acisf10811/products/images/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src15_src.img and ../../acisf10811/products/images/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Sun Sep 25 11:17:52 2011] ../../acisf10811/products/spectra/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src15_src.pi and ../../acisf10811/products/spectra/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sun Sep 25 11:17:52 2011] Not generating rmf since there are only 19 counts
[Sun Sep 25 11:17:55 2011] ../../acisf10811/products/lightcurves/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src15_src.lc and ../../acisf10811/products/lightcurves/fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sun Sep 25 11:18:44 2011] 192.034
[Sun Sep 25 11:22:45 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:22:45 2011] Error reading totcts from fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src15_src.pi.gz
[Sun Sep 25 11:22:45 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:22:45 2011] Using photon index=1.80, rate=0.000796, arf fullrun_ccd1_acisf10811_pi14-548_pass1_cl_src15.arf
[Sun Sep 25 11:22:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:22:45 2011] Updating source flux to 1.2e-14
[Sun Sep 25 11:23:04 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting