[Sun Sep 25 11:08:18 2011] Detection parameters:
  Position = (1021.4, 634.8) = 22 54 3.35 62 37 18.2
  Extent = 0.5" x 0.5", rotation angle = 39 degrees
  Source counts = 14.4 +/- 3.9
  Background counts = 0.6
  Rate = 0.0006 +/- 0.0002

[Sun Sep 25 11:08:20 2011] Off-axis axis estimate = 3.78'
[Sun Sep 25 11:10:00 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:10:00 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Sun Sep 25 11:10:00 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.943
[Sun Sep 25 11:10:00 2011] Giving source the simple spatial ID 47 for pass 0, mean size = 0.77"
[Sun Sep 25 11:10:04 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass0_src47.ximg exists
[Sun Sep 25 11:10:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10811_pi14-548_cl_pass0_src47.csv
[Sun Sep 25 11:10:04 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass0_src47_1.ximg exists
[Sun Sep 25 11:10:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10811_pi14-548_cl_pass0_src47.csv
[Sun Sep 25 11:10:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10811_pi14-548_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10811_pi14-548_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:10:07 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass0_tfrozen_src47.ximg exists
[Sun Sep 25 11:10:07 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass0_tfrozen_src47_1.ximg exists
[Sun Sep 25 11:10:07 2011] Fit fullrun_ccd0_acisf10811_pi14-548_cl_pass0_tfrozen_src47 appears to have run properly
[Sun Sep 25 11:10:36 2011] Spatial fit model total counts = 17.605300, observed total counts = 18.000000
[Sun Sep 25 11:10:36 2011] Offset between fit and detection position for source 52 = 0.671792 pixels
[Sun Sep 25 11:10:36 2011] 17.391630 total counts/ 2.721030 bgd. counts: snr = 8.893674
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.671792 pixels
  Position = (1021.9, 635.2) = 22 54 3.35 62 37 18.2
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 14.7 +/- 4.2
  Background counts = 2.7
  Rate = 0.0006 +/- 0.0002
[Sun Sep 25 11:10:36 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:10:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:10:36 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:10:36 2011] Source does appear to be extended
[Sun Sep 25 11:10:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:11:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:11:15 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Sun Sep 25 11:11:15 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.059
[Sun Sep 25 11:11:15 2011] Giving source the simple spatial ID 47 for pass 1, mean size = 0.58"
[Sun Sep 25 11:11:18 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass1_src47.ximg exists
[Sun Sep 25 11:11:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10811_pi14-548_cl_pass1_src47.csv
[Sun Sep 25 11:11:18 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass1_src47_1.ximg exists
[Sun Sep 25 11:11:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10811_pi14-548_cl_pass1_src47.csv
[Sun Sep 25 11:11:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10811_pi14-548_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10811_pi14-548_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:11:19 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass1_tfrozen_src47.ximg exists
[Sun Sep 25 11:11:19 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass1_tfrozen_src47_1.ximg exists
[Sun Sep 25 11:11:19 2011] Fit fullrun_ccd0_acisf10811_pi14-548_cl_pass1_tfrozen_src47 appears to have run properly
[Sun Sep 25 11:11:45 2011] Spatial fit model total counts = 17.852600, observed total counts = 18.000000
[Sun Sep 25 11:11:45 2011] Offset between fit and detection position for source 52 = 0.036277 pixels
[Sun Sep 25 11:11:45 2011] 17.594490 total counts/ 2.940690 bgd. counts: snr = 8.545267
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.036277 pixels
  Position = (1021.9, 635.2) = 22 54 3.35 62 37 18.2
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 14.7 +/- 4.2
  Background counts = 2.9
  Rate = 0.0006 +/- 0.0002
[Sun Sep 25 11:11:45 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:11:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:11:45 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:11:45 2011] Source does appear to be extended
[Sun Sep 25 11:11:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:12:26 2011] Not overwriting source region fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src52_src.reg
[Sun Sep 25 11:12:26 2011] Extracting stamp from image fullrun_ccd0_acisf10811_pi14-548_cl_sm2.00.img.gz, (995, 608) - (1049, 662)
[Sun Sep 25 11:12:26 2011] Writing fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src52.gif
[Sun Sep 25 11:15:28 2011] ../../acisf10811/products/events/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src52_src.evt and ../../acisf10811/products/events/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src52_bgd.evt exist, delete to re-create
[Sun Sep 25 11:15:28 2011] Size of ../../acisf10811/products/events/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src52_src.evt.gz[events] = 15 counts
[Sun Sep 25 11:15:28 2011] Mean chipx,y = (805.73, 715.13)
[Sun Sep 25 11:15:28 2011] Mean tdetx,y = (3776.13, 4326.27)
[Sun Sep 25 11:15:28 2011] chipx,y range = (789.00-822.00, 701.00-732.00)
[Sun Sep 25 11:15:28 2011] Size of ../../acisf10811/products/events/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src52_bgd.evt.gz[events] = 4 counts
[Sun Sep 25 11:15:28 2011] ../../acisf10811/products/images/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src52_src.img and ../../acisf10811/products/images/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src52_bgd.img exist, delete to re-create
[Sun Sep 25 11:15:28 2011] ../../acisf10811/products/spectra/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src52_src.pi and ../../acisf10811/products/spectra/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src52_bgd.pi exist, delete to re-create
[Sun Sep 25 11:15:28 2011] Not generating rmf since there are only 14 counts
[Sun Sep 25 11:15:31 2011] ../../acisf10811/products/lightcurves/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src52_src.lc and ../../acisf10811/products/lightcurves/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src52_bgd.lc exist, delete to re-create
[Sun Sep 25 11:16:51 2011] 193.04
[Sun Sep 25 11:22:43 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:22:43 2011] Error reading totcts from fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src52_src.pi.gz
[Sun Sep 25 11:22:44 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:22:44 2011] Using photon index=1.80, rate=0.0006, arf fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src52.arf
[Sun Sep 25 11:22:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:22:44 2011] Updating source flux to 8.8e-15
[Sun Sep 25 11:22:53 2011] Source 52 has fewer than 100.000000 counts, skipping spectral fitting