[Sun Sep 25 11:08:13 2011] Detection parameters:
  Position = (461.4, 987.4) = 22 54 43.41 62 40 10.8
  Extent = 3.6" x 2.9", rotation angle = 13 degrees
  Source counts = 122.3 +/- 12.2
  Background counts = 26.7
  Rate = 0.005 +/- 0.0005

[Sun Sep 25 11:08:20 2011] Off-axis axis estimate = 9.16'
[Sun Sep 25 11:10:00 2011] Using EEF radius (= 3.71 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:10:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 11:10:00 2011] Initial guess for spatial extent in simple fitting = 3.71"
[Sun Sep 25 11:10:00 2011] source mask rpix=7.5, npix_max = 258, mask sum = 256, frac = 0.992
[Sun Sep 25 11:10:00 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 3.71"
[Sun Sep 25 11:10:02 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass0_src4.ximg exists
[Sun Sep 25 11:10:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10811_pi14-548_cl_pass0_src4.csv
[Sun Sep 25 11:10:02 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass0_src4_1.ximg exists
[Sun Sep 25 11:10:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10811_pi14-548_cl_pass0_src4.csv
[Sun Sep 25 11:10:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10811_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10811_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:10:04 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sun Sep 25 11:10:04 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Sep 25 11:10:04 2011] Fit fullrun_ccd0_acisf10811_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Sep 25 11:10:36 2011] Spatial fit model total counts = 145.344000, observed total counts = 144.000000
[Sun Sep 25 11:10:36 2011] Offset between fit and detection position for source 4 = 2.485086 pixels
[Sun Sep 25 11:10:36 2011] 145.181700 total counts/ 38.963700 bgd. counts: snr = 17.016413
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.485086 pixels
  Position = (463.7, 988.5) = 22 54 43.29 62 40 11.1
  Extent = 2.9 (2.4-3.7)", rotation angle = 0
  Source counts = 106.2 +/- 12.0
  Background counts = 39.0
  Rate = 0.004 +/- 0.0005
[Sun Sep 25 11:10:36 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:10:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:10:36 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:10:36 2011] Source does appear to be extended
[Sun Sep 25 11:10:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:11:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 11:11:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 11:11:15 2011] Initial guess for spatial extent in simple fitting = 2.95"
[Sun Sep 25 11:11:15 2011] source mask rpix=6.0, npix_max = 168, mask sum = 169, frac = 1.003
[Sun Sep 25 11:11:15 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 2.95"
[Sun Sep 25 11:11:16 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass1_src4.ximg exists
[Sun Sep 25 11:11:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10811_pi14-548_cl_pass1_src4.csv
[Sun Sep 25 11:11:16 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass1_src4_1.ximg exists
[Sun Sep 25 11:11:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10811_pi14-548_cl_pass1_src4.csv
[Sun Sep 25 11:11:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10811_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10811_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 11:11:18 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sun Sep 25 11:11:18 2011] fullrun_ccd0_acisf10811_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Sep 25 11:11:18 2011] Fit fullrun_ccd0_acisf10811_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Sep 25 11:11:44 2011] Spatial fit model total counts = 134.602000, observed total counts = 133.000000
[Sun Sep 25 11:11:44 2011] Offset between fit and detection position for source 4 = 0.586987 pixels
[Sun Sep 25 11:11:44 2011] 134.647700 total counts/ 52.593000 bgd. counts: snr = 11.314607
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.586987 pixels
  Position = (464.1, 988.1) = 22 54 43.26 62 40 10.9
  Extent = 2.4 (1.7-3.2)", rotation angle = 0
  Source counts = 82.1 +/- 11.6
  Background counts = 52.6
  Rate = 0.003 +/- 0.0005
[Sun Sep 25 11:11:45 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 11:11:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 11:11:45 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 11:11:45 2011] Source does appear to be extended
[Sun Sep 25 11:11:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:12:25 2011] Not overwriting source region fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src4_src.reg
[Sun Sep 25 11:12:25 2011] Extracting stamp from image fullrun_ccd0_acisf10811_pi14-548_cl_sm2.00.img.gz, (356, 880) - (572, 1096)
[Sun Sep 25 11:12:25 2011] Writing fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src4.gif
[Sun Sep 25 11:12:39 2011] ../../acisf10811/products/events/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src4_src.evt and ../../acisf10811/products/events/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sun Sep 25 11:12:39 2011] Size of ../../acisf10811/products/events/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src4_src.evt.gz[events] = 126 counts
[Sun Sep 25 11:12:39 2011] Mean chipx,y = (464.06, 145.04)
[Sun Sep 25 11:12:39 2011] Mean tdetx,y = (3206.04, 4667.94)
[Sun Sep 25 11:12:39 2011] chipx,y range = (437.00-497.00, 114.00-172.00)
[Sun Sep 25 11:12:40 2011] Size of ../../acisf10811/products/events/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 98 counts
[Sun Sep 25 11:12:40 2011] ../../acisf10811/products/images/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src4_src.img and ../../acisf10811/products/images/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Sun Sep 25 11:12:40 2011] ../../acisf10811/products/spectra/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src4_src.pi and ../../acisf10811/products/spectra/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sun Sep 25 11:12:40 2011] Not generating rmf since there are only 82 counts
[Sun Sep 25 11:12:42 2011] ../../acisf10811/products/lightcurves/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src4_src.lc and ../../acisf10811/products/lightcurves/fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sun Sep 25 11:16:49 2011] 164.148
[Sun Sep 25 11:22:43 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:22:43 2011] Error reading totcts from fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src4_src.pi.gz
[Sun Sep 25 11:22:44 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:22:44 2011] Using photon index=1.80, rate=0.00336, arf fullrun_ccd0_acisf10811_pi14-548_pass1_cl_src4.arf
[Sun Sep 25 11:22:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 11:22:44 2011] Updating source flux to 5.6e-14
[Sun Sep 25 11:22:53 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting