[Tue Jun 28 20:37:34 2011] Detection parameters:
  Position = (775.8, 106.2) = 22 54 57.27 62 34 17.5
  Extent = 1.9" x 1.2", rotation angle = 79 degrees
  Source counts = 314.0 +/- 18.4
  Background counts = 23.0
  Rate = 0.01 +/- 0.0009

[Tue Jun 28 20:37:37 2011] Off-axis axis estimate = 7.42'
[Tue Jun 28 20:39:06 2011] Using EEF radius (= 2.44 ")to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:39:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 28 20:39:06 2011] Initial guess for spatial extent in simple fitting = 2.44"
[Tue Jun 28 20:39:06 2011] source mask rpix=5.0, npix_max = 119, mask sum = 121, frac = 1.013
[Tue Jun 28 20:39:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.44"
[Tue Jun 28 20:39:07 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src1.ximg exists
[Tue Jun 28 20:39:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src1.csv
[Tue Jun 28 20:39:07 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jun 28 20:39:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src1.csv
[Tue Jun 28 20:39:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:39:08 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 28 20:39:08 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 28 20:39:08 2011] Fit fullrun_ccd3_acisf10809_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 28 20:39:41 2011] Spatial fit model total counts = 450.274000, observed total counts = 442.000000
[Tue Jun 28 20:39:41 2011] Offset between fit and detection position for source 9 = 1.249156 pixels
[Tue Jun 28 20:39:41 2011] 451.954000 total counts/ 131.201000 bgd. counts: snr = 28.002845
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.249156 pixels
  Position = (777.0, 105.8) = 22 54 57.22 62 34 17.1
  Extent = 2.0 (2.0-2.0)", rotation angle = 0
  Source counts = 320.8 +/- 21.3
  Background counts = 131.2
  Rate = 0.02 +/- 0.001
[Tue Jun 28 20:39:41 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:39:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:39:41 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:39:41 2011] Source does appear to be extended
[Tue Jun 28 20:39:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 20:39:41 2011] Source is confused with source 6
[Tue Jun 28 20:39:41 2011] Source is confused with source 63
[Tue Jun 28 20:40:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:40:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 28 20:40:24 2011] Initial guess for spatial extent in simple fitting = 2.03"
[Tue Jun 28 20:40:24 2011] source mask rpix=4.1, npix_max = 85, mask sum = 90, frac = 1.051
[Tue Jun 28 20:40:24 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.03"
[Tue Jun 28 20:40:28 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src1.ximg exists
[Tue Jun 28 20:40:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src1.csv
[Tue Jun 28 20:40:28 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jun 28 20:40:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src1.csv
[Tue Jun 28 20:40:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:40:29 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 28 20:40:29 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 28 20:40:29 2011] Fit fullrun_ccd3_acisf10809_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 28 20:41:00 2011] Spatial fit model total counts = 434.219000, observed total counts = 428.000000
[Tue Jun 28 20:41:00 2011] Offset between fit and detection position for source 9 = 1.238776 pixels
[Tue Jun 28 20:41:00 2011] 437.027000 total counts/ 169.792000 bgd. counts: snr = 20.508539
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.238776 pixels
  Position = (776.2, 106.8) = 22 54 57.27 62 34 17.5
  Extent = 1.6 (1.6-1.8)", rotation angle = 0
  Source counts = 267.2 +/- 20.9
  Background counts = 169.8
  Rate = 0.01 +/- 0.001
[Tue Jun 28 20:41:01 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:41:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:41:01 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:41:01 2011] Source does appear to be extended
[Tue Jun 28 20:41:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 22:05:26 2011] Not overwriting source region fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9_src.reg
[Tue Jun 28 22:05:26 2011] Extracting stamp from image fullrun_ccd3_acisf10809_pi14-548_cl_sm2.00.img.gz, (701, 32) - (851, 182)
[Tue Jun 28 22:05:26 2011] Writing fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9.gif
[Tue Jun 28 22:05:29 2011] ../../acisf10809/products/events/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9_src.evt and ../../acisf10809/products/events/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Tue Jun 28 22:05:29 2011] Size of ../../acisf10809/products/events/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9_src.evt.gz[events] = 370 counts
[Tue Jun 28 22:05:29 2011] Mean chipx,y = (957.52, 117.55)
[Tue Jun 28 22:05:29 2011] Mean tdetx,y = (5014.45, 4018.52)
[Tue Jun 28 22:05:29 2011] chipx,y range = (927.00-986.00, 91.00-144.00)
[Tue Jun 28 22:05:29 2011] Size of ../../acisf10809/products/events/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 29 counts
[Tue Jun 28 22:05:29 2011] ../../acisf10809/products/images/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9_src.img and ../../acisf10809/products/images/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Tue Jun 28 22:05:29 2011] rmf not found, will run specextract
[Tue Jun 28 22:05:29 2011] arf not found, will run specextract
[Tue Jun 28 22:05:42 2011] ../../acisf10809/products/spectra/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9.warf not found
[Tue Jun 28 22:05:42 2011] ../../acisf10809/products/spectra/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9.wrmf not found
[Tue Jun 28 22:05:42 2011] Removal of ../../acisf10809/products/spectra/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9.soff failed
[Tue Jun 28 22:05:48 2011] ../../acisf10809/products/lightcurves/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9_src.lc and ../../acisf10809/products/lightcurves/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Tue Jun 28 22:27:34 2011] Keeping rmf generated by specextract
[Tue Jun 28 22:27:34 2011] 177.069
[Tue Jun 28 22:30:06 2011] Updating aperture counts using extracted products
[Tue Jun 28 22:30:06 2011] Error reading totcts from fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9_src.pi.gz
[Tue Jun 28 22:30:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Jun 28 22:30:07 2011] Using photon index=1.80, rate=0.0125, arf fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src9.arf
[Tue Jun 28 22:30:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 28 22:30:07 2011] Updating source flux to 2e-13