[Tue Jun 28 20:37:34 2011] Detection parameters:
  Position = (968.0, 825.3) = 22 54 43.36 62 40 10.9
  Extent = 0.6" x 0.5", rotation angle = 144 degrees
  Source counts = 90.8 +/- 9.8
  Background counts = 6.2
  Rate = 0.004 +/- 0.0005

[Tue Jun 28 20:37:37 2011] Off-axis axis estimate = 7.83'
[Tue Jun 28 20:39:06 2011] Using EEF radius (= 2.71 ")to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:39:06 2011] Initial guess for spatial extent in simple fitting = 2.71"
[Tue Jun 28 20:39:06 2011] source mask rpix=5.5, npix_max = 144, mask sum = 122, frac = 0.842
[Tue Jun 28 20:39:06 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 2.71"
[Tue Jun 28 20:39:07 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src5.ximg exists
[Tue Jun 28 20:39:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src5.csv
[Tue Jun 28 20:39:07 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src5_1.ximg exists
[Tue Jun 28 20:39:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src5.csv
[Tue Jun 28 20:39:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:39:08 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Tue Jun 28 20:39:08 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jun 28 20:39:08 2011] Fit fullrun_ccd3_acisf10809_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Jun 28 20:39:41 2011] Spatial fit model total counts = 128.644000, observed total counts = 128.000000
[Tue Jun 28 20:39:41 2011] Offset between fit and detection position for source 8 = 0.801644 pixels
[Tue Jun 28 20:39:41 2011] 129.105200 total counts/ 27.953200 bgd. counts: snr = 19.131927
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.801644 pixels
  Position = (968.8, 825.3) = 22 54 43.34 62 40 10.7
  Extent = 1.8 (1.5-2.1)", rotation angle = 0
  Source counts = 101.2 +/- 11.4
  Background counts = 28.0
  Rate = 0.005 +/- 0.0005
[Tue Jun 28 20:39:41 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:39:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:39:41 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:39:41 2011] Source does appear to be extended
[Tue Jun 28 20:39:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 20:40:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:40:24 2011] Initial guess for spatial extent in simple fitting = 1.77"
[Tue Jun 28 20:40:24 2011] source mask rpix=3.6, npix_max = 67, mask sum = 55, frac = 0.815
[Tue Jun 28 20:40:24 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 1.77"
[Tue Jun 28 20:40:28 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src5.ximg exists
[Tue Jun 28 20:40:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src5.csv
[Tue Jun 28 20:40:28 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src5_1.ximg exists
[Tue Jun 28 20:40:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src5.csv
[Tue Jun 28 20:40:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:40:29 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Tue Jun 28 20:40:29 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jun 28 20:40:29 2011] Fit fullrun_ccd3_acisf10809_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Jun 28 20:41:00 2011] Spatial fit model total counts = 114.506000, observed total counts = 113.000000
[Tue Jun 28 20:41:00 2011] Offset between fit and detection position for source 8 = 0.262373 pixels
[Tue Jun 28 20:41:00 2011] 114.622700 total counts/ 20.710700 bgd. counts: snr = 20.635914
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.262373 pixels
  Position = (968.7, 825.6) = 22 54 43.35 62 40 10.8
  Extent = 1.7 (1.4-2.1)", rotation angle = 0
  Source counts = 93.9 +/- 10.7
  Background counts = 20.7
  Rate = 0.004 +/- 0.0005
[Tue Jun 28 20:41:01 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:41:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:41:01 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:41:01 2011] Source does appear to be extended
[Tue Jun 28 20:41:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 22:05:26 2011] Not overwriting source region fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8_src.reg
[Tue Jun 28 22:05:26 2011] Extracting stamp from image fullrun_ccd3_acisf10809_pi14-548_cl_sm2.00.img.gz, (890, 747) - (1047, 904)
[Tue Jun 28 22:05:27 2011] Writing fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8.gif
[Tue Jun 28 22:07:00 2011] ../../acisf10809/products/events/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8_src.evt and ../../acisf10809/products/events/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Tue Jun 28 22:07:00 2011] Size of ../../acisf10809/products/events/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8_src.evt.gz[events] = 117 counts
[Tue Jun 28 22:07:00 2011] Mean chipx,y = (253.12, 364.36)
[Tue Jun 28 22:07:00 2011] Mean tdetx,y = (4767.64, 3314.12)
[Tue Jun 28 22:07:00 2011] chipx,y range = (227.00-282.00, 342.00-388.00)
[Tue Jun 28 22:07:00 2011] Size of ../../acisf10809/products/events/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 59 counts
[Tue Jun 28 22:07:00 2011] ../../acisf10809/products/images/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8_src.img and ../../acisf10809/products/images/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Tue Jun 28 22:07:00 2011] Not generating rmf since there are only 93 counts
[Tue Jun 28 22:07:00 2011] arf not found, will run specextract
[Tue Jun 28 22:07:27 2011] ../../acisf10809/products/spectra/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8.warf not found
[Tue Jun 28 22:07:27 2011] ../../acisf10809/products/spectra/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8.wrmf not found
[Tue Jun 28 22:07:27 2011] Removal of ../../acisf10809/products/spectra/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8.soff failed
[Tue Jun 28 22:07:33 2011] ../../acisf10809/products/lightcurves/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8_src.lc and ../../acisf10809/products/lightcurves/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Tue Jun 28 22:27:34 2011] Spectrum 8 has only 94 counts, deleting rmf
[Tue Jun 28 22:27:34 2011] 161.979
[Tue Jun 28 22:30:06 2011] Updating aperture counts using extracted products
[Tue Jun 28 22:30:06 2011] Error reading totcts from fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8_src.pi.gz
[Tue Jun 28 22:30:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Jun 28 22:30:07 2011] Using photon index=1.80, rate=0.0044, arf fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src8.arf
[Tue Jun 28 22:30:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 28 22:30:07 2011] Updating source flux to 7.5e-14