[Tue Jun 28 20:37:37 2011] Detection parameters:
  Position = (800.0, 82.2) = 22 54 55.55 62 34 5.6
  Extent = 1.9" x 1.3", rotation angle = 81 degrees
  Source counts = 55.4 +/- 8.3
  Background counts = 13.6
  Rate = 0.003 +/- 0.0004

[Tue Jun 28 20:37:37 2011] Off-axis axis estimate = 7.70'
[Tue Jun 28 20:39:06 2011] Using EEF radius (= 2.62 ")to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:39:06 2011] Initial guess for spatial extent in simple fitting = 2.62"
[Tue Jun 28 20:39:06 2011] source mask rpix=5.3, npix_max = 136, mask sum = 144, frac = 1.058
[Tue Jun 28 20:39:06 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 2.62"
[Tue Jun 28 20:39:07 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src10.ximg exists
[Tue Jun 28 20:39:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src10.csv
[Tue Jun 28 20:39:07 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src10_1.ximg exists
[Tue Jun 28 20:39:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src10.csv
[Tue Jun 28 20:39:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10809_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:39:08 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue Jun 28 20:39:08 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jun 28 20:39:08 2011] Fit fullrun_ccd3_acisf10809_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Jun 28 20:39:41 2011] Spatial fit model total counts = 400.048000, observed total counts = 405.000000
[Tue Jun 28 20:39:41 2011] Offset between fit and detection position for source 63 = 5.300906 pixels
[Tue Jun 28 20:39:41 2011] Warning, changing simple spatial fit ID from 10 to 6
[Tue Jun 28 20:39:41 2011] 403.336000 total counts/ 219.603000 bgd. counts: snr = 12.398468
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 5.300906 pixels
  Position = (794.7, 82.4) = 22 54 55.96 62 34 5.5
  Extent = 5.0 (4.9-10.0)", rotation angle = 0
  Source counts = 183.7 +/- 20.1
  Background counts = 219.6
  Rate = 0.009 +/- 0.0009
[Tue Jun 28 20:39:41 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:39:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:39:41 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:39:41 2011] Source does appear to be extended
[Tue Jun 28 20:39:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 20:39:41 2011] Source is confused with source 9
[Tue Jun 28 20:40:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:40:24 2011] Initial guess for spatial extent in simple fitting = 5.01"
[Tue Jun 28 20:40:24 2011] source mask rpix=10.2, npix_max = 455, mask sum = 441, frac = 0.968
[Tue Jun 28 20:40:24 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 5.01"
[Tue Jun 28 20:40:28 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src10.ximg exists
[Tue Jun 28 20:40:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src10.csv
[Tue Jun 28 20:40:28 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Jun 28 20:40:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src10.csv
[Tue Jun 28 20:40:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10809_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:40:29 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Jun 28 20:40:29 2011] fullrun_ccd3_acisf10809_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jun 28 20:40:29 2011] Fit fullrun_ccd3_acisf10809_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Jun 28 20:41:00 2011] Warning, spatial fit 10 centroid is now closest to src. 39
[Tue Jun 28 20:41:01 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:41:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:41:01 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:41:01 2011] Source does appear to be extended
[Tue Jun 28 20:41:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 22:05:27 2011] Not overwriting source region fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63_src.reg
[Tue Jun 28 22:05:27 2011] Extracting stamp from image fullrun_ccd3_acisf10809_pi14-548_cl_sm2.00.img.gz, (566, 0) - (1024, 311)
[Tue Jun 28 22:05:27 2011] Writing fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63.gif
[Tue Jun 28 22:09:23 2011] ../../acisf10809/products/events/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63_src.evt and ../../acisf10809/products/events/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63_bgd.evt exist, delete to re-create
[Tue Jun 28 22:09:23 2011] Size of ../../acisf10809/products/events/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63_src.evt.gz[events] = 604 counts
[Tue Jun 28 22:09:23 2011] Mean chipx,y = (960.37, 105.66)
[Tue Jun 28 22:09:23 2011] Mean tdetx,y = (5026.34, 4021.37)
[Tue Jun 28 22:09:23 2011] chipx,y range = (913.00-1014.00, 39.00-144.00)
[Tue Jun 28 22:09:23 2011] Size of ../../acisf10809/products/events/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63_bgd.evt.gz[events] = 287 counts
[Tue Jun 28 22:09:23 2011] ../../acisf10809/products/images/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63_src.img and ../../acisf10809/products/images/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63_bgd.img exist, delete to re-create
[Tue Jun 28 22:09:23 2011] rmf not found, will run specextract
[Tue Jun 28 22:09:23 2011] arf not found, will run specextract
[Tue Jun 28 22:09:39 2011] ../../acisf10809/products/spectra/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63.warf not found
[Tue Jun 28 22:09:39 2011] ../../acisf10809/products/spectra/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63.wrmf not found
[Tue Jun 28 22:09:39 2011] Removal of ../../acisf10809/products/spectra/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63.soff failed
[Tue Jun 28 22:09:45 2011] ../../acisf10809/products/lightcurves/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63_src.lc and ../../acisf10809/products/lightcurves/fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63_bgd.lc exist, delete to re-create
[Tue Jun 28 22:27:34 2011] Keeping rmf generated by specextract
[Tue Jun 28 22:27:34 2011] 177.112
[Tue Jun 28 22:30:06 2011] Updating aperture counts using extracted products
[Tue Jun 28 22:30:06 2011] Error reading totcts from fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63_src.pi.gz
[Tue Jun 28 22:30:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Jun 28 22:30:07 2011] Using photon index=1.80, rate=0.00862, arf fullrun_ccd3_acisf10809_pi14-548_pass1_cl_src63.arf
[Tue Jun 28 22:30:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 28 22:30:07 2011] Updating source flux to 1.4e-13