[Tue Jun 28 20:37:31 2011] Detection parameters:
  Position = (324.3, 505.4) = 22 56 30.76 62 42 16.1
  Extent = 1.3" x 1.1", rotation angle = 115 degrees
  Source counts = 17.1 +/- 4.4
  Background counts = 1.9
  Rate = 0.0008 +/- 0.0002

[Tue Jun 28 20:37:33 2011] Off-axis axis estimate = 5.96'
[Tue Jun 28 20:39:02 2011] Using EEF radius (= 1.61 ")to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:39:02 2011] Initial guess for spatial extent in simple fitting = 1.61"
[Tue Jun 28 20:39:02 2011] source mask rpix=3.3, npix_max = 57, mask sum = 39, frac = 0.684
[Tue Jun 28 20:39:02 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 1.61"
[Tue Jun 28 20:39:04 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src39.ximg exists
[Tue Jun 28 20:39:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src39.csv
[Tue Jun 28 20:39:04 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src39_1.ximg exists
[Tue Jun 28 20:39:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src39.csv
[Tue Jun 28 20:39:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:39:06 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src39.ximg exists
[Tue Jun 28 20:39:06 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src39_1.ximg exists
[Tue Jun 28 20:39:06 2011] Fit fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src39 appears to have run properly
[Tue Jun 28 20:39:35 2011] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 17.464043 pixels away
[Tue Jun 28 20:39:35 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:39:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:39:35 2011] Assessing source extent using major
[Tue Jun 28 20:39:35 2011] Source does appear to be extended
[Tue Jun 28 20:39:35 2011] Computing asymmetry using major and minor axis, asym = 1.17
[Tue Jun 28 20:40:21 2011] Using EEF radius (= 1.61 ")to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:40:21 2011] Initial guess for spatial extent in simple fitting = 1.61"
[Tue Jun 28 20:40:21 2011] source mask rpix=3.3, npix_max = 57, mask sum = 39, frac = 0.684
[Tue Jun 28 20:40:21 2011] Giving source the simple spatial ID 39 for pass 1, mean size = 1.61"
[Tue Jun 28 20:40:22 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src39.ximg exists
[Tue Jun 28 20:40:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src39.csv
[Tue Jun 28 20:40:22 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src39_1.ximg exists
[Tue Jun 28 20:40:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src39.csv
[Tue Jun 28 20:40:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:40:24 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src39.ximg exists
[Tue Jun 28 20:40:24 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src39_1.ximg exists
[Tue Jun 28 20:40:24 2011] Fit fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src39 appears to have run properly
[Tue Jun 28 20:40:54 2011] Spatial fit model total counts = 24.529800, observed total counts = 24.000000
[Tue Jun 28 20:40:54 2011] Offset between fit and detection position for source 43 = 0.999178 pixels
[Tue Jun 28 20:40:54 2011] 24.314080 total counts/ 1.701080 bgd. counts: snr = 17.337873
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.999178 pixels
  Position = (325.2, 506.0) = 22 56 30.74 62 42 16.1
  Extent = 1.5 (0.4-2.2)", rotation angle = 0
  Source counts = 22.6 +/- 4.9
  Background counts = 1.7
  Rate = 0.001 +/- 0.0002
[Tue Jun 28 20:40:54 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:40:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:40:54 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:40:54 2011] Source does appear to be extended
[Tue Jun 28 20:40:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 21:28:13 2011] Not overwriting source region fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43_src.reg
[Tue Jun 28 21:28:13 2011] Extracting stamp from image fullrun_ccd2_acisf10809_pi14-548_cl_sm2.00.img.gz, (257, 437) - (394, 574)
[Tue Jun 28 21:28:13 2011] Writing fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43.gif
[Tue Jun 28 21:49:31 2011] ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43_src.evt and ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43_bgd.evt exist, delete to re-create
[Tue Jun 28 21:49:31 2011] Size of ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43_src.evt.gz[events] = 24 counts
[Tue Jun 28 21:49:31 2011] Mean chipx,y = (131.21, 317.54)
[Tue Jun 28 21:49:31 2011] Mean tdetx,y = (3378.54, 3954.79)
[Tue Jun 28 21:49:31 2011] chipx,y range = (108.00-146.00, 297.00-337.00)
[Tue Jun 28 21:49:31 2011] Size of ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43_bgd.evt.gz[events] = 43 counts
[Tue Jun 28 21:49:31 2011] ../../acisf10809/products/images/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43_src.img and ../../acisf10809/products/images/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43_bgd.img exist, delete to re-create
[Tue Jun 28 21:49:31 2011] Not generating rmf since there are only 22 counts
[Tue Jun 28 21:49:31 2011] arf not found, will run specextract
[Tue Jun 28 21:49:54 2011] ../../acisf10809/products/spectra/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43.warf not found
[Tue Jun 28 21:49:54 2011] ../../acisf10809/products/spectra/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43.wrmf not found
[Tue Jun 28 21:49:54 2011] Removal of ../../acisf10809/products/spectra/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43.soff failed
[Tue Jun 28 21:50:00 2011] ../../acisf10809/products/lightcurves/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43_src.lc and ../../acisf10809/products/lightcurves/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43_bgd.lc exist, delete to re-create
[Tue Jun 28 22:05:26 2011] Spectrum 43 has only 23 counts, deleting rmf
[Tue Jun 28 22:05:26 2011] 164.264
[Tue Jun 28 22:30:05 2011] Updating aperture counts using extracted products
[Tue Jun 28 22:30:05 2011] Error reading totcts from fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43_src.pi.gz
[Tue Jun 28 22:30:06 2011] Calculating source flux in energy range 0.30-8.00
[Tue Jun 28 22:30:06 2011] Using photon index=1.80, rate=0.00106, arf fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src43.arf
[Tue Jun 28 22:30:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 28 22:30:06 2011] Updating source flux to 1.8e-14