[Tue Jun 28 20:37:28 2011] Detection parameters:
  Position = (209.5, 856.9) = 22 56 39.05 62 45 8.9
  Extent = 3.6" x 2.5", rotation angle = 26 degrees
  Source counts = 202.6 +/- 15.6
  Background counts = 41.4
  Rate = 0.01 +/- 0.0007

[Tue Jun 28 20:37:33 2011] Off-axis axis estimate = 8.66'
[Tue Jun 28 20:39:02 2011] Using EEF radius (= 3.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:39:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 28 20:39:02 2011] Initial guess for spatial extent in simple fitting = 3.31"
[Tue Jun 28 20:39:02 2011] source mask rpix=6.7, npix_max = 209, mask sum = 210, frac = 1.003
[Tue Jun 28 20:39:02 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.31"
[Tue Jun 28 20:39:04 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src1.ximg exists
[Tue Jun 28 20:39:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src1.csv
[Tue Jun 28 20:39:04 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jun 28 20:39:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src1.csv
[Tue Jun 28 20:39:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:39:05 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 28 20:39:05 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 28 20:39:05 2011] Fit fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 28 20:39:35 2011] Spatial fit model total counts = 261.241000, observed total counts = 255.000000
[Tue Jun 28 20:39:35 2011] Offset between fit and detection position for source 4 = 1.361810 pixels
[Tue Jun 28 20:39:35 2011] 261.399900 total counts/ 68.123900 bgd. counts: snr = 23.416834
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.361810 pixels
  Position = (210.2, 858.1) = 22 56 39.04 62 45 9.2
  Extent = 3.1 (2.6-3.6)", rotation angle = 0
  Source counts = 193.3 +/- 16.2
  Background counts = 68.1
  Rate = 0.009 +/- 0.0008
[Tue Jun 28 20:39:35 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:39:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:39:35 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:39:35 2011] Source does appear to be extended
[Tue Jun 28 20:39:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 20:40:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:40:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 28 20:40:21 2011] Initial guess for spatial extent in simple fitting = 3.10"
[Tue Jun 28 20:40:21 2011] source mask rpix=6.3, npix_max = 184, mask sum = 196, frac = 1.062
[Tue Jun 28 20:40:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.10"
[Tue Jun 28 20:40:22 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src1.ximg exists
[Tue Jun 28 20:40:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src1.csv
[Tue Jun 28 20:40:22 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jun 28 20:40:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src1.csv
[Tue Jun 28 20:40:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:40:23 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 28 20:40:23 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 28 20:40:23 2011] Fit fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 28 20:40:54 2011] Spatial fit model total counts = 260.331000, observed total counts = 254.000000
[Tue Jun 28 20:40:54 2011] Offset between fit and detection position for source 4 = 0.298783 pixels
[Tue Jun 28 20:40:54 2011] 260.086800 total counts/ 76.486800 bgd. counts: snr = 20.993238
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.298783 pixels
  Position = (210.5, 858.2) = 22 56 39.02 62 45 9.2
  Extent = 3.0 (2.5-3.4)", rotation angle = 0
  Source counts = 183.6 +/- 16.1
  Background counts = 76.5
  Rate = 0.009 +/- 0.0008
[Tue Jun 28 20:40:54 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:40:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:40:54 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:40:54 2011] Source does appear to be extended
[Tue Jun 28 20:40:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 21:28:12 2011] Not overwriting source region fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4_src.reg
[Tue Jun 28 21:28:12 2011] Extracting stamp from image fullrun_ccd2_acisf10809_pi14-548_cl_sm2.00.img.gz, (76, 723) - (345, 993)
[Tue Jun 28 21:28:12 2011] Writing fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4.gif
[Tue Jun 28 21:28:53 2011] ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4_src.evt and ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Jun 28 21:28:53 2011] Size of ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4_src.evt.gz[events] = 238 counts
[Tue Jun 28 21:28:53 2011] Mean chipx,y = (354.71, 25.71)
[Tue Jun 28 21:28:53 2011] Mean tdetx,y = (3086.71, 3731.29)
[Tue Jun 28 21:28:53 2011] chipx,y range = (319.00-390.00, 4.00-50.00)
[Tue Jun 28 21:28:53 2011] Size of ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 132 counts
[Tue Jun 28 21:28:53 2011] ../../acisf10809/products/images/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4_src.img and ../../acisf10809/products/images/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Jun 28 21:28:53 2011] rmf not found, will run specextract
[Tue Jun 28 21:28:53 2011] arf not found, will run specextract
[Tue Jun 28 21:29:02 2011] ../../acisf10809/products/spectra/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4.warf not found
[Tue Jun 28 21:29:02 2011] ../../acisf10809/products/spectra/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4.wrmf not found
[Tue Jun 28 21:29:02 2011] Removal of ../../acisf10809/products/spectra/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4.soff failed
[Tue Jun 28 21:29:07 2011] ../../acisf10809/products/lightcurves/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4_src.lc and ../../acisf10809/products/lightcurves/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Jun 28 22:05:25 2011] Keeping rmf generated by specextract
[Tue Jun 28 22:05:25 2011] 162.429
[Tue Jun 28 22:30:05 2011] Updating aperture counts using extracted products
[Tue Jun 28 22:30:05 2011] Error reading totcts from fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4_src.pi.gz
[Tue Jun 28 22:30:05 2011] Calculating source flux in energy range 0.30-8.00
[Tue Jun 28 22:30:05 2011] Using photon index=1.80, rate=0.00861, arf fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src4.arf
[Tue Jun 28 22:30:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 28 22:30:05 2011] Updating source flux to 1.5e-13