[Tue Jun 28 20:37:28 2011] Detection parameters:
  Position = (654.9, 910.3) = 22 56 7.15 62 45 35.6
  Extent = 2.2" x 1.6", rotation angle = 168 degrees
  Source counts = 188.3 +/- 14.2
  Background counts = 14.7
  Rate = 0.009 +/- 0.0007

[Tue Jun 28 20:37:33 2011] Off-axis axis estimate = 7.30'
[Tue Jun 28 20:39:02 2011] Using EEF radius (= 2.37 ")to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:39:02 2011] Initial guess for spatial extent in simple fitting = 2.37"
[Tue Jun 28 20:39:02 2011] source mask rpix=4.8, npix_max = 112, mask sum = 110, frac = 0.975
[Tue Jun 28 20:39:02 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.37"
[Tue Jun 28 20:39:04 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src3.ximg exists
[Tue Jun 28 20:39:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src3.csv
[Tue Jun 28 20:39:04 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Jun 28 20:39:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src3.csv
[Tue Jun 28 20:39:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:39:05 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 28 20:39:05 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 28 20:39:05 2011] Fit fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jun 28 20:39:35 2011] Spatial fit model total counts = 199.228000, observed total counts = 199.000000
[Tue Jun 28 20:39:35 2011] Offset between fit and detection position for source 3 = 0.739837 pixels
[Tue Jun 28 20:39:35 2011] 199.532600 total counts/ 46.309600 bgd. counts: snr = 22.515855
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.739837 pixels
  Position = (655.1, 911.1) = 22 56 7.17 62 45 35.7
  Extent = 1.9 (1.5-2.4)", rotation angle = 0
  Source counts = 153.2 +/- 14.1
  Background counts = 46.3
  Rate = 0.007 +/- 0.0007
[Tue Jun 28 20:39:35 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:39:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:39:35 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:39:35 2011] Source does appear to be extended
[Tue Jun 28 20:39:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 20:40:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:40:21 2011] Initial guess for spatial extent in simple fitting = 1.93"
[Tue Jun 28 20:40:21 2011] source mask rpix=3.9, npix_max = 77, mask sum = 64, frac = 0.821
[Tue Jun 28 20:40:21 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.93"
[Tue Jun 28 20:40:22 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src3.ximg exists
[Tue Jun 28 20:40:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src3.csv
[Tue Jun 28 20:40:22 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Jun 28 20:40:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src3.csv
[Tue Jun 28 20:40:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:40:23 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 28 20:40:23 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 28 20:40:23 2011] Fit fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jun 28 20:40:54 2011] Spatial fit model total counts = 183.993000, observed total counts = 184.000000
[Tue Jun 28 20:40:54 2011] Offset between fit and detection position for source 3 = 0.482214 pixels
[Tue Jun 28 20:40:54 2011] 185.514800 total counts/ 78.829800 bgd. counts: snr = 12.015951
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.482214 pixels
  Position = (654.6, 911.0) = 22 56 7.21 62 45 35.7
  Extent = 1.3 (1.0-1.8)", rotation angle = 0
  Source counts = 106.7 +/- 13.6
  Background counts = 78.8
  Rate = 0.005 +/- 0.0006
[Tue Jun 28 20:40:54 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:40:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:40:54 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:40:54 2011] Source does appear to be extended
[Tue Jun 28 20:40:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 21:28:12 2011] Not overwriting source region fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3_src.reg
[Tue Jun 28 21:28:12 2011] Extracting stamp from image fullrun_ccd2_acisf10809_pi14-548_cl_sm2.00.img.gz, (593, 850) - (716, 972)
[Tue Jun 28 21:28:12 2011] Writing fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3.gif
[Tue Jun 28 21:29:36 2011] ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3_src.evt and ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Jun 28 21:29:36 2011] Size of ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3_src.evt.gz[events] = 169 counts
[Tue Jun 28 21:29:36 2011] Mean chipx,y = (651.05, 359.51)
[Tue Jun 28 21:29:36 2011] Mean tdetx,y = (3420.51, 3434.95)
[Tue Jun 28 21:29:36 2011] chipx,y range = (626.00-677.00, 335.00-383.00)
[Tue Jun 28 21:29:36 2011] Size of ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 45 counts
[Tue Jun 28 21:29:36 2011] ../../acisf10809/products/images/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3_src.img and ../../acisf10809/products/images/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Jun 28 21:29:36 2011] rmf not found, will run specextract
[Tue Jun 28 21:29:36 2011] arf not found, will run specextract
[Tue Jun 28 21:29:59 2011] ../../acisf10809/products/spectra/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3.warf not found
[Tue Jun 28 21:29:59 2011] ../../acisf10809/products/spectra/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3.wrmf not found
[Tue Jun 28 21:29:59 2011] Removal of ../../acisf10809/products/spectra/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3.soff failed
[Tue Jun 28 21:30:04 2011] ../../acisf10809/products/lightcurves/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3_src.lc and ../../acisf10809/products/lightcurves/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Jun 28 22:05:25 2011] Keeping rmf generated by specextract
[Tue Jun 28 22:05:25 2011] 166.871
[Tue Jun 28 22:30:05 2011] Updating aperture counts using extracted products
[Tue Jun 28 22:30:05 2011] Error reading totcts from fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Jun 28 22:30:05 2011] Calculating source flux in energy range 0.30-8.00
[Tue Jun 28 22:30:05 2011] Using photon index=1.80, rate=0.005, arf fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src3.arf
[Tue Jun 28 22:30:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 28 22:30:05 2011] Updating source flux to 8.3e-14