[Tue Jun 28 20:37:30 2011] Detection parameters:
  Position = (687.1, 200.1) = 22 56 4.79 62 39 46.2
  Extent = 0.5" x 0.5", rotation angle = 175 degrees
  Source counts = 23.3 +/- 4.9
  Background counts = 0.7
  Rate = 0.001 +/- 0.0002

[Tue Jun 28 20:37:33 2011] Off-axis axis estimate = 2.08'
[Tue Jun 28 20:39:02 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:39:02 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Tue Jun 28 20:39:02 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.775
[Tue Jun 28 20:39:02 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 0.44"
[Tue Jun 28 20:39:04 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src30.ximg exists
[Tue Jun 28 20:39:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src30.csv
[Tue Jun 28 20:39:04 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src30_1.ximg exists
[Tue Jun 28 20:39:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src30.csv
[Tue Jun 28 20:39:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10809_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:39:05 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Tue Jun 28 20:39:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src30.csv
[Tue Jun 28 20:39:05 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Jun 28 20:39:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src30.csv
[Tue Jun 28 20:39:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10809_pi14-548_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:39:35 2011] Spatial fit model total counts = 22.591100, observed total counts = 26.000000
[Tue Jun 28 20:39:35 2011] Offset between fit and detection position for source 26 = 0.694839 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.694839 pixels
  Position = (687.6, 200.6) = 22 56 4.79 62 39 46.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 22.7 +/- 4.8
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Tue Jun 28 20:39:35 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:39:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:39:35 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:39:35 2011] Source does appear to be extended
[Tue Jun 28 20:39:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 20:40:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:40:21 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Tue Jun 28 20:40:21 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.922
[Tue Jun 28 20:40:21 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 0.52"
[Tue Jun 28 20:40:22 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src30.ximg exists
[Tue Jun 28 20:40:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src30.csv
[Tue Jun 28 20:40:22 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src30_1.ximg exists
[Tue Jun 28 20:40:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src30.csv
[Tue Jun 28 20:40:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10809_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:40:24 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Tue Jun 28 20:40:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src30.csv
[Tue Jun 28 20:40:24 2011] fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Jun 28 20:40:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src30.csv
[Tue Jun 28 20:40:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10809_pi14-548_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:40:54 2011] Spatial fit model total counts = 22.535900, observed total counts = 26.000000
[Tue Jun 28 20:40:54 2011] Offset between fit and detection position for source 26 = 0.015699 pixels
[Tue Jun 28 20:40:54 2011] 22.659000 total counts/ 0.000000 bgd. counts: snr = 81032408117962.781250
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.015699 pixels
  Position = (687.6, 200.6) = 22 56 4.79 62 39 46.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 22.7 +/- 4.8
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Tue Jun 28 20:40:54 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:40:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:40:54 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:40:54 2011] Source does appear to be extended
[Tue Jun 28 20:40:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 21:28:12 2011] Not overwriting source region fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26_src.reg
[Tue Jun 28 21:28:12 2011] Extracting stamp from image fullrun_ccd2_acisf10809_pi14-548_cl_sm2.00.img.gz, (664, 177) - (711, 224)
[Tue Jun 28 21:28:12 2011] Writing fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26.gif
[Tue Jun 28 21:44:51 2011] ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26_src.evt and ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Tue Jun 28 21:44:51 2011] Size of ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26_src.evt.gz[events] = 24 counts
[Tue Jun 28 21:44:51 2011] Mean chipx,y = (79.88, 794.50)
[Tue Jun 28 21:44:51 2011] Mean tdetx,y = (3855.50, 4006.12)
[Tue Jun 28 21:44:51 2011] chipx,y range = (64.00-101.00, 777.00-806.00)
[Tue Jun 28 21:44:51 2011] Size of ../../acisf10809/products/events/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 4 counts
[Tue Jun 28 21:44:51 2011] ../../acisf10809/products/images/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26_src.img and ../../acisf10809/products/images/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Tue Jun 28 21:44:51 2011] Not generating rmf since there are only 22 counts
[Tue Jun 28 21:44:51 2011] arf not found, will run specextract
[Tue Jun 28 21:45:22 2011] ../../acisf10809/products/spectra/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26.warf not found
[Tue Jun 28 21:45:22 2011] ../../acisf10809/products/spectra/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26.wrmf not found
[Tue Jun 28 21:45:22 2011] Removal of ../../acisf10809/products/spectra/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26.soff failed
[Tue Jun 28 21:45:28 2011] ../../acisf10809/products/lightcurves/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26_src.lc and ../../acisf10809/products/lightcurves/fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Tue Jun 28 22:05:26 2011] Spectrum 26 has only 23 counts, deleting rmf
[Tue Jun 28 22:05:26 2011] 199.033
[Tue Jun 28 22:30:05 2011] Updating aperture counts using extracted products
[Tue Jun 28 22:30:05 2011] Error reading totcts from fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26_src.pi.gz
[Tue Jun 28 22:30:06 2011] Calculating source flux in energy range 0.30-8.00
[Tue Jun 28 22:30:06 2011] Using photon index=1.80, rate=0.00106, arf fullrun_ccd2_acisf10809_pi14-548_pass1_cl_src26.arf
[Tue Jun 28 22:30:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 28 22:30:06 2011] Updating source flux to 1.5e-14