[Tue Jun 28 20:37:27 2011] Detection parameters:
  Position = (605.3, 918.7) = 22 55 51.42 62 33 45.4
  Extent = 0.9" x 0.5", rotation angle = 88 degrees
  Source counts = 12.3 +/- 3.6
  Background counts = 0.7
  Rate = 0.0006 +/- 0.0002

[Tue Jun 28 20:37:28 2011] Off-axis axis estimate = 4.80'
[Tue Jun 28 20:39:01 2011] Using EEF radius (= 1.10 ")to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:39:01 2011] Initial guess for spatial extent in simple fitting = 1.10"
[Tue Jun 28 20:39:01 2011] source mask rpix=2.2, npix_max = 30, mask sum = 22, frac = 0.732
[Tue Jun 28 20:39:01 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 1.10"
[Tue Jun 28 20:39:02 2011] fullrun_ccd1_acisf10809_pi14-548_cl_pass0_src15.ximg exists
[Tue Jun 28 20:39:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10809_pi14-548_cl_pass0_src15.csv
[Tue Jun 28 20:39:02 2011] fullrun_ccd1_acisf10809_pi14-548_cl_pass0_src15_1.ximg exists
[Tue Jun 28 20:39:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10809_pi14-548_cl_pass0_src15.csv
[Tue Jun 28 20:39:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10809_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10809_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:39:02 2011] fullrun_ccd1_acisf10809_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Tue Jun 28 20:39:02 2011] fullrun_ccd1_acisf10809_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jun 28 20:39:02 2011] Fit fullrun_ccd1_acisf10809_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Jun 28 20:39:28 2011] Spatial fit model total counts = 13.435900, observed total counts = 13.000000
[Tue Jun 28 20:39:28 2011] Offset between fit and detection position for source 24 = 0.445686 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.445686 pixels
  Position = (605.7, 918.6) = 22 55 51.42 62 33 45.1
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 13.6 +/- 3.7
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Tue Jun 28 20:39:28 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:39:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:39:28 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:39:28 2011] Source does appear to be extended
[Tue Jun 28 20:39:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 20:40:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:40:18 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Tue Jun 28 20:40:18 2011] source mask rpix=1.9, npix_max = 22, mask sum = 22, frac = 0.980
[Tue Jun 28 20:40:18 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.92"
[Tue Jun 28 20:40:20 2011] fullrun_ccd1_acisf10809_pi14-548_cl_pass1_src15.ximg exists
[Tue Jun 28 20:40:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10809_pi14-548_cl_pass1_src15.csv
[Tue Jun 28 20:40:20 2011] fullrun_ccd1_acisf10809_pi14-548_cl_pass1_src15_1.ximg exists
[Tue Jun 28 20:40:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10809_pi14-548_cl_pass1_src15.csv
[Tue Jun 28 20:40:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10809_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10809_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:40:20 2011] fullrun_ccd1_acisf10809_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Tue Jun 28 20:40:20 2011] fullrun_ccd1_acisf10809_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Jun 28 20:40:20 2011] Fit fullrun_ccd1_acisf10809_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Jun 28 20:40:47 2011] Spatial fit model total counts = 14.086600, observed total counts = 14.000000
[Tue Jun 28 20:40:47 2011] Offset between fit and detection position for source 24 = 0.271468 pixels
[Tue Jun 28 20:40:47 2011] 14.604900 total counts/ 3.506700 bgd. counts: snr = 5.926568
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.271468 pixels
  Position = (605.8, 918.4) = 22 55 51.42 62 33 45.0
  Extent = 0.8 (0.2-1.4)", rotation angle = 0
  Source counts = 11.1 +/- 3.8
  Background counts = 3.5
  Rate = 0.0005 +/- 0.0002
[Tue Jun 28 20:40:47 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:40:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:40:47 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:40:47 2011] Source does appear to be extended
[Tue Jun 28 20:40:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 21:10:09 2011] Not overwriting source region fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24_src.reg
[Tue Jun 28 21:10:09 2011] Extracting stamp from image fullrun_ccd1_acisf10809_pi14-548_cl_sm2.00.img.gz, (571, 883) - (641, 954)
[Tue Jun 28 21:10:09 2011] Writing fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24.gif
[Tue Jun 28 21:16:38 2011] ../../acisf10809/products/events/fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24_src.evt and ../../acisf10809/products/events/fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24_bgd.evt exist, delete to re-create
[Tue Jun 28 21:16:38 2011] Size of ../../acisf10809/products/events/fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24_src.evt.gz[events] = 13 counts
[Tue Jun 28 21:16:38 2011] Mean chipx,y = (396.62, 711.31)
[Tue Jun 28 21:16:38 2011] Mean tdetx,y = (4420.69, 4503.62)
[Tue Jun 28 21:16:38 2011] chipx,y range = (378.00-414.00, 694.00-728.00)
[Tue Jun 28 21:16:38 2011] Size of ../../acisf10809/products/events/fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24_bgd.evt.gz[events] = 9 counts
[Tue Jun 28 21:16:38 2011] ../../acisf10809/products/images/fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24_src.img and ../../acisf10809/products/images/fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24_bgd.img exist, delete to re-create
[Tue Jun 28 21:16:38 2011] Not generating rmf since there are only 11 counts
[Tue Jun 28 21:16:38 2011] arf not found, will run specextract
[Tue Jun 28 21:17:02 2011] ../../acisf10809/products/spectra/fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24.warf not found
[Tue Jun 28 21:17:02 2011] ../../acisf10809/products/spectra/fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24.wrmf not found
[Tue Jun 28 21:17:02 2011] Removal of ../../acisf10809/products/spectra/fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24.soff failed
[Tue Jun 28 21:17:08 2011] ../../acisf10809/products/lightcurves/fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24_src.lc and ../../acisf10809/products/lightcurves/fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24_bgd.lc exist, delete to re-create
[Tue Jun 28 21:28:11 2011] Spectrum 24 has only 11 counts, deleting rmf
[Tue Jun 28 21:28:11 2011] 181.343
[Tue Jun 28 22:30:04 2011] Updating aperture counts using extracted products
[Tue Jun 28 22:30:04 2011] Error reading totcts from fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24_src.pi.gz
[Tue Jun 28 22:30:04 2011] Calculating source flux in energy range 0.30-8.00
[Tue Jun 28 22:30:04 2011] Using photon index=1.80, rate=0.00052, arf fullrun_ccd1_acisf10809_pi14-548_pass1_cl_src24.arf
[Tue Jun 28 22:30:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 28 22:30:04 2011] Updating source flux to 8.1e-15