[Tue Jun 28 20:37:21 2011] Detection parameters:
  Position = (824.5, 603.1) = 22 56 36.60 62 36 6.8
  Extent = 0.9" x 0.7", rotation angle = 13 degrees
  Source counts = 28.6 +/- 5.5
  Background counts = 1.4
  Rate = 0.001 +/- 0.0003

[Tue Jun 28 20:37:25 2011] Off-axis axis estimate = 5.88'
[Tue Jun 28 20:38:56 2011] Using EEF radius (= 1.57 ")to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:38:56 2011] Initial guess for spatial extent in simple fitting = 1.57"
[Tue Jun 28 20:38:56 2011] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.028
[Tue Jun 28 20:38:56 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 1.57"
[Tue Jun 28 20:38:59 2011] fullrun_ccd0_acisf10809_pi14-548_cl_pass0_src25.ximg exists
[Tue Jun 28 20:38:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10809_pi14-548_cl_pass0_src25.csv
[Tue Jun 28 20:38:59 2011] fullrun_ccd0_acisf10809_pi14-548_cl_pass0_src25_1.ximg exists
[Tue Jun 28 20:38:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10809_pi14-548_cl_pass0_src25.csv
[Tue Jun 28 20:38:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10809_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10809_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:39:00 2011] fullrun_ccd0_acisf10809_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Tue Jun 28 20:39:00 2011] fullrun_ccd0_acisf10809_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Tue Jun 28 20:39:00 2011] Fit fullrun_ccd0_acisf10809_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Tue Jun 28 20:39:25 2011] Spatial fit model total counts = 33.456600, observed total counts = 33.000000
[Tue Jun 28 20:39:25 2011] Offset between fit and detection position for source 25 = 0.697689 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.697689 pixels
  Position = (825.1, 603.5) = 22 56 36.59 62 36 6.8
  Extent = 1.2 (0.8-1.4)", rotation angle = 0
  Source counts = 33.4 +/- 5.8
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Tue Jun 28 20:39:25 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:39:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:39:25 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:39:25 2011] Source does appear to be extended
[Tue Jun 28 20:39:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 20:40:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 28 20:40:15 2011] Initial guess for spatial extent in simple fitting = 1.22"
[Tue Jun 28 20:40:15 2011] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.844
[Tue Jun 28 20:40:15 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 1.22"
[Tue Jun 28 20:40:16 2011] fullrun_ccd0_acisf10809_pi14-548_cl_pass1_src25.ximg exists
[Tue Jun 28 20:40:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10809_pi14-548_cl_pass1_src25.csv
[Tue Jun 28 20:40:16 2011] fullrun_ccd0_acisf10809_pi14-548_cl_pass1_src25_1.ximg exists
[Tue Jun 28 20:40:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10809_pi14-548_cl_pass1_src25.csv
[Tue Jun 28 20:40:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10809_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10809_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 28 20:40:18 2011] fullrun_ccd0_acisf10809_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Tue Jun 28 20:40:18 2011] fullrun_ccd0_acisf10809_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Jun 28 20:40:18 2011] Fit fullrun_ccd0_acisf10809_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Tue Jun 28 20:40:45 2011] Spatial fit model total counts = 32.920700, observed total counts = 32.000000
[Tue Jun 28 20:40:45 2011] Offset between fit and detection position for source 25 = 0.472747 pixels
[Tue Jun 28 20:40:45 2011] 32.339480 total counts/ 5.693280 bgd. counts: snr = 11.167450
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.472747 pixels
  Position = (825.5, 603.6) = 22 56 36.56 62 36 6.8
  Extent = 0.9 (0.6-1.4)", rotation angle = 0
  Source counts = 26.6 +/- 5.7
  Background counts = 5.7
  Rate = 0.001 +/- 0.0003
[Tue Jun 28 20:40:45 2011] Vigneting correction estimate = 1.000000
[Tue Jun 28 20:40:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 28 20:40:45 2011] Assessing source extent using major axis lower bound
[Tue Jun 28 20:40:45 2011] Source does appear to be extended
[Tue Jun 28 20:40:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 28 20:41:33 2011] Not overwriting source region fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25_src.reg
[Tue Jun 28 20:41:33 2011] Extracting stamp from image fullrun_ccd0_acisf10809_pi14-548_cl_sm2.00.img.gz, (785, 563) - (866, 644)
[Tue Jun 28 20:41:33 2011] Writing fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25.gif
[Tue Jun 28 20:52:50 2011] ../../acisf10809/products/events/fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25_src.evt and ../../acisf10809/products/events/fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Tue Jun 28 20:52:51 2011] Size of ../../acisf10809/products/events/fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25_src.evt.gz[events] = 31 counts
[Tue Jun 28 20:52:51 2011] Mean chipx,y = (505.35, 676.32)
[Tue Jun 28 20:52:51 2011] Mean tdetx,y = (3737.32, 4626.65)
[Tue Jun 28 20:52:51 2011] chipx,y range = (487.00-524.00, 656.00-692.00)
[Tue Jun 28 20:52:51 2011] Size of ../../acisf10809/products/events/fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 17 counts
[Tue Jun 28 20:52:51 2011] ../../acisf10809/products/images/fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25_src.img and ../../acisf10809/products/images/fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Tue Jun 28 20:52:51 2011] Not generating rmf since there are only 26 counts
[Tue Jun 28 20:52:51 2011] arf not found, will run specextract
[Tue Jun 28 20:53:16 2011] ../../acisf10809/products/spectra/fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25.warf not found
[Tue Jun 28 20:53:16 2011] ../../acisf10809/products/spectra/fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25.wrmf not found
[Tue Jun 28 20:53:16 2011] Removal of ../../acisf10809/products/spectra/fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25.soff failed
[Tue Jun 28 20:53:21 2011] ../../acisf10809/products/lightcurves/fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25_src.lc and ../../acisf10809/products/lightcurves/fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Tue Jun 28 21:10:08 2011] Spectrum 25 has only 27 counts, deleting rmf
[Tue Jun 28 21:10:08 2011] 171.222
[Tue Jun 28 22:30:03 2011] Updating aperture counts using extracted products
[Tue Jun 28 22:30:03 2011] Error reading totcts from fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25_src.pi.gz
[Tue Jun 28 22:30:03 2011] Calculating source flux in energy range 0.30-8.00
[Tue Jun 28 22:30:03 2011] Using photon index=1.80, rate=0.00125, arf fullrun_ccd0_acisf10809_pi14-548_pass1_cl_src25.arf
[Tue Jun 28 22:30:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 28 22:30:03 2011] Updating source flux to 2e-14