[Fri Sep 30 01:55:28 2011] Detection parameters:
  Position = (340.2, 219.5) = 16 28 37.30 39 32 56.3
  Extent = 1.0" x 0.9", rotation angle = 129 degrees
  Source counts = 379.0 +/- 27.6
  Background counts = 380.0
  Rate = 0.01 +/- 0.0009

[Fri Sep 30 01:55:30 2011] Off-axis axis estimate = 1.68'
[Fri Sep 30 01:57:32 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 01:57:32 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Fri Sep 30 01:57:32 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.294
[Fri Sep 30 01:57:32 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.40"
[Fri Sep 30 01:57:33 2011] fullrun_ccd3_acisf10805_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 01:57:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10805_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 01:57:33 2011] fullrun_ccd3_acisf10805_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 01:57:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10805_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 01:57:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10805_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10805_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 01:57:33 2011] fullrun_ccd3_acisf10805_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 01:57:33 2011] fullrun_ccd3_acisf10805_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 01:57:33 2011] Fit fullrun_ccd3_acisf10805_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 01:57:45 2011] Spatial fit model total counts = 963.000000, observed total counts = 963.000000
[Fri Sep 30 01:57:45 2011] Offset between fit and detection position for source 1 = 1.329089 pixels
[Fri Sep 30 01:57:45 2011] 972.243000 total counts/ 817.499000 bgd. counts: snr = 5.412155
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.329089 pixels
  Position = (339.2, 220.4) = 16 28 37.37 39 32 56.5
  Extent = 1.5 (1.4-1.5)", rotation angle = 0
  Source counts = 154.7 +/- 31.2
  Background counts = 817.5
  Rate = 0.005 +/- 0.001
[Fri Sep 30 01:57:45 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 01:57:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 01:57:45 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 01:57:45 2011] Source does appear to be extended
[Fri Sep 30 01:57:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 01:58:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 01:58:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 01:58:08 2011] Initial guess for spatial extent in simple fitting = 1.47"
[Fri Sep 30 01:58:08 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.007
[Fri Sep 30 01:58:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.47"
[Fri Sep 30 01:58:09 2011] fullrun_ccd3_acisf10805_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 01:58:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10805_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 01:58:10 2011] fullrun_ccd3_acisf10805_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 01:58:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10805_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 01:58:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10805_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10805_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 01:58:10 2011] fullrun_ccd3_acisf10805_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 01:58:10 2011] fullrun_ccd3_acisf10805_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 01:58:10 2011] Fit fullrun_ccd3_acisf10805_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 01:58:18 2011] Spatial fit model total counts = 1995.990000, observed total counts = 1996.000000
[Fri Sep 30 01:58:18 2011] Offset between fit and detection position for source 1 = 3.226631 pixels
[Fri Sep 30 01:58:18 2011] 1996.062000 total counts/ 1670.810000 bgd. counts: snr = 7.957130
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.226631 pixels
  Position = (342.1, 219.0) = 16 28 37.24 39 32 55.8
  Extent = 2.3 (1.3-2.9)", rotation angle = 0
  Source counts = 325.3 +/- 44.7
  Background counts = 1670.8
  Rate = 0.01 +/- 0.001
[Fri Sep 30 01:58:18 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 01:58:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 01:58:18 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 01:58:18 2011] Source does appear to be extended
[Fri Sep 30 01:58:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 01:59:51 2011] Not overwriting source region fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 01:59:51 2011] Extracting stamp from image fullrun_ccd3_acisf10805_pi14-548_cl_sm2.00.img.gz, (235, 112) - (449, 326)
[Fri Sep 30 01:59:51 2011] Writing fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 01:59:52 2011] ../../acisf10805/products/events/fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1_src.evt and ../../acisf10805/products/events/fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 01:59:52 2011] Size of ../../acisf10805/products/events/fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1_src.evt.gz[events] = 3297 counts
[Fri Sep 30 01:59:52 2011] Mean chipx,y = (847.33, 823.32)
[Fri Sep 30 01:59:52 2011] Mean tdetx,y = (4308.68, 3908.33)
[Fri Sep 30 01:59:52 2011] chipx,y range = (813.00-884.00, 787.00-856.00)
[Fri Sep 30 01:59:52 2011] Size of ../../acisf10805/products/events/fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 21664 counts
[Fri Sep 30 01:59:52 2011] ../../acisf10805/products/images/fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1_src.img and ../../acisf10805/products/images/fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 01:59:52 2011] ../../acisf10805/products/spectra/fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1_src.pi and ../../acisf10805/products/spectra/fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 01:59:56 2011] ../../acisf10805/products/lightcurves/fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1_src.lc and ../../acisf10805/products/lightcurves/fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 02:00:16 2011] Keeping rmf generated by specextract
[Fri Sep 30 02:00:16 2011] 201.049
[Fri Sep 30 02:00:23 2011] Updating aperture counts using extracted products
[Fri Sep 30 02:00:23 2011] Error reading totcts from fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 02:00:24 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 02:00:24 2011] Using photon index=1.80, rate=0.0107, arf fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 02:00:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 02:00:24 2011] Updating source flux to 1.2e-13
[Fri Sep 30 02:00:50 2011] Reading fit data from acisf10805/analysis//spectral/fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 30 02:00:50 2011] Spectral fit parameter nH value = 3.45473e+21
[Fri Sep 30 02:00:50 2011] Spectral fit parameter PhoIndex value = 3.50878
[Fri Sep 30 02:00:50 2011] Failed to get F(0.3-8.0) from acisf10805/analysis//spectral/fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 02:00:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 02:00:50 2011] Using Nh = 3.5e+21, photon index=3.51, rate=0.0107, arf fullrun_ccd3_acisf10805_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 02:00:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 02:00:50 2011] Updating source flux to 8e-14