[Fri Sep 30 01:55:27 2011] Detection parameters:
  Position = (726.6, 536.4) = 16 29 4.39 39 34 17.9
  Extent = 0.5" x 0.5", rotation angle = 104 degrees
  Source counts = 107.7 +/- 10.8
  Background counts = 9.3
  Rate = 0.004 +/- 0.0004

[Fri Sep 30 01:55:28 2011] Off-axis axis estimate = 3.78'
[Fri Sep 30 01:57:31 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 01:57:31 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Fri Sep 30 01:57:31 2011] source mask rpix=1.6, npix_max = 16, mask sum = 12, frac = 0.708
[Fri Sep 30 01:57:31 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.77"
[Fri Sep 30 01:57:32 2011] fullrun_ccd2_acisf10805_pi14-548_cl_pass0_src2.ximg exists
[Fri Sep 30 01:57:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10805_pi14-548_cl_pass0_src2.csv
[Fri Sep 30 01:57:32 2011] fullrun_ccd2_acisf10805_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Sep 30 01:57:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10805_pi14-548_cl_pass0_src2.csv
[Fri Sep 30 01:57:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10805_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10805_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 01:57:32 2011] fullrun_ccd2_acisf10805_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 30 01:57:32 2011] fullrun_ccd2_acisf10805_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 30 01:57:32 2011] Fit fullrun_ccd2_acisf10805_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep 30 01:57:43 2011] Source 1 is offset by 6.802301 and 5.635553 pixels which is larger than
2 X fitted extent = 0.779455 x 0.779455, not incorporating fit results
[Fri Sep 30 01:57:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 01:57:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 01:57:43 2011] Assessing source extent using major
[Fri Sep 30 01:57:43 2011] Source does appear to be extended
[Fri Sep 30 01:57:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 01:58:05 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 01:58:05 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Fri Sep 30 01:58:05 2011] source mask rpix=1.6, npix_max = 16, mask sum = 12, frac = 0.708
[Fri Sep 30 01:58:05 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.77"
[Fri Sep 30 01:58:08 2011] fullrun_ccd2_acisf10805_pi14-548_cl_pass1_src2.ximg exists
[Fri Sep 30 01:58:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10805_pi14-548_cl_pass1_src2.csv
[Fri Sep 30 01:58:08 2011] fullrun_ccd2_acisf10805_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Sep 30 01:58:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10805_pi14-548_cl_pass1_src2.csv
[Fri Sep 30 01:58:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10805_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10805_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 01:58:08 2011] fullrun_ccd2_acisf10805_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 30 01:58:08 2011] fullrun_ccd2_acisf10805_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 30 01:58:08 2011] Fit fullrun_ccd2_acisf10805_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Sep 30 01:58:16 2011] Spatial fit model total counts = 129.551000, observed total counts = 131.000000
[Fri Sep 30 01:58:16 2011] Offset between fit and detection position for source 1 = 0.755395 pixels
[Fri Sep 30 01:58:16 2011] 129.351800 total counts/ 18.298800 bgd. counts: snr = 25.960855
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.755395 pixels
  Position = (727.2, 536.9) = 16 29 4.39 39 34 17.9
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 111.1 +/- 11.4
  Background counts = 18.3
  Rate = 0.004 +/- 0.0004
[Fri Sep 30 01:58:16 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 01:58:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 01:58:16 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 01:58:16 2011] Source does appear to be extended
[Fri Sep 30 01:58:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 01:59:13 2011] Not overwriting source region fullrun_ccd2_acisf10805_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 01:59:13 2011] Extracting stamp from image fullrun_ccd2_acisf10805_pi14-548_cl_sm2.00.img.gz, (692, 501) - (763, 572)
[Fri Sep 30 01:59:13 2011] Writing fullrun_ccd2_acisf10805_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 01:59:18 2011] ../../acisf10805/products/events/fullrun_ccd2_acisf10805_pi14-548_pass1_cl_src1_src.evt and ../../acisf10805/products/events/fullrun_ccd2_acisf10805_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 01:59:18 2011] Size of ../../acisf10805/products/events/fullrun_ccd2_acisf10805_pi14-548_pass1_cl_src1_src.evt.gz[events] = 122 counts
[Fri Sep 30 01:59:18 2011] Mean chipx,y = (442.57, 642.72)
[Fri Sep 30 01:59:18 2011] Mean tdetx,y = (3703.72, 3643.43)
[Fri Sep 30 01:59:18 2011] chipx,y range = (422.00-463.00, 623.00-663.00)
[Fri Sep 30 01:59:18 2011] Size of ../../acisf10805/products/events/fullrun_ccd2_acisf10805_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 127 counts
[Fri Sep 30 01:59:18 2011] ../../acisf10805/products/images/fullrun_ccd2_acisf10805_pi14-548_pass1_cl_src1_src.img and ../../acisf10805/products/images/fullrun_ccd2_acisf10805_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 01:59:18 2011] ../../acisf10805/products/spectra/fullrun_ccd2_acisf10805_pi14-548_pass1_cl_src1_src.pi and ../../acisf10805/products/spectra/fullrun_ccd2_acisf10805_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 01:59:21 2011] ../../acisf10805/products/lightcurves/fullrun_ccd2_acisf10805_pi14-548_pass1_cl_src1_src.lc and ../../acisf10805/products/lightcurves/fullrun_ccd2_acisf10805_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 01:59:50 2011] Keeping rmf generated by specextract
[Fri Sep 30 01:59:51 2011] 192.45
[Fri Sep 30 02:00:23 2011] Updating aperture counts using extracted products
[Fri Sep 30 02:00:23 2011] Error reading totcts from fullrun_ccd2_acisf10805_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 02:00:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 02:00:23 2011] Using photon index=1.80, rate=0.00366, arf fullrun_ccd2_acisf10805_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 02:00:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 02:00:23 2011] Updating source flux to 4.5e-14
[Fri Sep 30 02:00:29 2011] Flag b found in src. 1 procflags, skipping spectral fitting