[Sat Oct 22 14:50:06 2011] Detection parameters:
  Position = (525.5, 1003.9) = 16 29 4.38 39 34 18.0
  Extent = 1.5" x 1.2", rotation angle = 129 degrees
  Source counts = 38.4 +/- 7.3
  Background counts = 15.6
  Rate = 0.002 +/- 0.0004

[Sat Oct 22 14:50:06 2011] Off-axis axis estimate = 6.58'
[Sat Oct 22 14:51:32 2011] Using EEF radius (= 1.94 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:51:32 2011] Initial guess for spatial extent in simple fitting = 1.94"
[Sat Oct 22 14:51:32 2011] source mask rpix=3.9, npix_max = 78, mask sum = 81, frac = 1.030
[Sat Oct 22 14:51:32 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 1.94"
[Sat Oct 22 14:51:32 2011] fullrun_ccd3_acisf10804_pi14-548_cl_pass0_src4.ximg exists
[Sat Oct 22 14:51:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10804_pi14-548_cl_pass0_src4.csv
[Sat Oct 22 14:51:32 2011] fullrun_ccd3_acisf10804_pi14-548_cl_pass0_src4_1.ximg exists
[Sat Oct 22 14:51:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10804_pi14-548_cl_pass0_src4.csv
[Sat Oct 22 14:51:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10804_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10804_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:51:32 2011] fullrun_ccd3_acisf10804_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sat Oct 22 14:51:32 2011] fullrun_ccd3_acisf10804_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Oct 22 14:51:32 2011] Fit fullrun_ccd3_acisf10804_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Oct 22 14:51:39 2011] Spatial fit model total counts = 61.966800, observed total counts = 62.000000
[Sat Oct 22 14:51:39 2011] Offset between fit and detection position for source 6 = 1.736812 pixels
[Sat Oct 22 14:51:39 2011] 62.212200 total counts/ 26.177000 bgd. counts: snr = 7.043151
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.736812 pixels
  Position = (527.2, 1003.3) = 16 29 4.33 39 34 17.4
  Extent = 1.2 (0.9-1.7)", rotation angle = 0
  Source counts = 36.0 +/- 7.9
  Background counts = 26.2
  Rate = 0.002 +/- 0.0004
[Sat Oct 22 14:51:39 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:51:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:51:39 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:51:39 2011] Source does appear to be extended
[Sat Oct 22 14:51:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:51:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:51:54 2011] Initial guess for spatial extent in simple fitting = 1.16"
[Sat Oct 22 14:51:54 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.105
[Sat Oct 22 14:51:54 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 1.16"
[Sat Oct 22 14:51:55 2011] fullrun_ccd3_acisf10804_pi14-548_cl_pass1_src4.ximg exists
[Sat Oct 22 14:51:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10804_pi14-548_cl_pass1_src4.csv
[Sat Oct 22 14:51:55 2011] fullrun_ccd3_acisf10804_pi14-548_cl_pass1_src4_1.ximg exists
[Sat Oct 22 14:51:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10804_pi14-548_cl_pass1_src4.csv
[Sat Oct 22 14:51:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10804_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10804_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:51:55 2011] fullrun_ccd3_acisf10804_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sat Oct 22 14:51:55 2011] fullrun_ccd3_acisf10804_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Oct 22 14:51:55 2011] Fit fullrun_ccd3_acisf10804_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Oct 22 14:52:01 2011] Spatial fit model total counts = 48.067500, observed total counts = 50.000000
[Sat Oct 22 14:52:01 2011] Offset between fit and detection position for source 6 = 0.862111 pixels
[Sat Oct 22 14:52:01 2011] 48.076090 total counts/ 9.085690 bgd. counts: snr = 12.935366
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.862111 pixels
  Position = (527.6, 1002.6) = 16 29 4.31 39 34 17.1
  Extent = 1.2 (0.9-1.7)", rotation angle = 0
  Source counts = 39.0 +/- 6.9
  Background counts = 9.1
  Rate = 0.002 +/- 0.0004
[Sat Oct 22 14:52:01 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:52:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:52:01 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:52:01 2011] Source does appear to be extended
[Sat Oct 22 14:52:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:53:20 2011] Not overwriting source region fullrun_ccd3_acisf10804_pi14-548_pass1_cl_src6_src.reg
[Sat Oct 22 14:53:20 2011] Extracting stamp from image fullrun_ccd3_acisf10804_pi14-548_cl_sm2.00.img.gz, (473, 947) - (583, 1058)
[Sat Oct 22 14:53:20 2011] Writing fullrun_ccd3_acisf10804_pi14-548_pass1_cl_src6.gif
[Sat Oct 22 14:53:29 2011] ../../acisf10804/products/events/fullrun_ccd3_acisf10804_pi14-548_pass1_cl_src6_src.evt and ../../acisf10804/products/events/fullrun_ccd3_acisf10804_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sat Oct 22 14:53:29 2011] Size of ../../acisf10804/products/events/fullrun_ccd3_acisf10804_pi14-548_pass1_cl_src6_src.evt.gz[events] = 50 counts
[Sat Oct 22 14:53:29 2011] Mean chipx,y = (720.46, 227.64)
[Sat Oct 22 14:53:29 2011] Mean tdetx,y = (4904.36, 3781.46)
[Sat Oct 22 14:53:29 2011] chipx,y range = (702.00-746.00, 210.00-250.00)
[Sat Oct 22 14:53:29 2011] Size of ../../acisf10804/products/events/fullrun_ccd3_acisf10804_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 166 counts
[Sat Oct 22 14:53:29 2011] ../../acisf10804/products/images/fullrun_ccd3_acisf10804_pi14-548_pass1_cl_src6_src.img and ../../acisf10804/products/images/fullrun_ccd3_acisf10804_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Sat Oct 22 14:53:29 2011] ../../acisf10804/products/spectra/fullrun_ccd3_acisf10804_pi14-548_pass1_cl_src6_src.pi and ../../acisf10804/products/spectra/fullrun_ccd3_acisf10804_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sat Oct 22 14:53:29 2011] Not generating rmf since there are only 38 counts
[Sat Oct 22 14:53:32 2011] ../../acisf10804/products/lightcurves/fullrun_ccd3_acisf10804_pi14-548_pass1_cl_src6_src.lc and ../../acisf10804/products/lightcurves/fullrun_ccd3_acisf10804_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sat Oct 22 14:53:33 2011] 175.859
[Sat Oct 22 14:53:38 2011] Updating aperture counts using extracted products
[Sat Oct 22 14:53:38 2011] Error reading totcts from fullrun_ccd3_acisf10804_pi14-548_pass1_cl_src6_src.pi.gz
[Sat Oct 22 14:53:38 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 14:53:38 2011] Using photon index=1.80, rate=0.00208, arf fullrun_ccd3_acisf10804_pi14-548_pass1_cl_src6.arf
[Sat Oct 22 14:53:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 14:53:38 2011] Updating source flux to 2.8e-14
[Sat Oct 22 14:53:43 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting