[Fri Oct  7 18:50:21 2011] Detection parameters:
  Position = (1060.0, 597.7) = 2 30 0.73 -29 40 58.5
  Extent = 0.8" x 0.6", rotation angle = 59 degrees
  Source counts = 71.5 +/- 8.5
  Background counts = 1.5
  Rate = 0.002 +/- 0.0003

[Fri Oct  7 18:50:21 2011] Off-axis axis estimate = 3.41'
[Fri Oct  7 18:51:20 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 18:51:20 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Fri Oct  7 18:51:20 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.152
[Fri Oct  7 18:51:20 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.67"
[Fri Oct  7 18:51:20 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct  7 18:51:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10802_pi14-548_cl_pass0_src2.csv
[Fri Oct  7 18:51:20 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct  7 18:51:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10802_pi14-548_cl_pass0_src2.csv
[Fri Oct  7 18:51:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10802_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10802_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 18:51:20 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct  7 18:51:20 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct  7 18:51:20 2011] Fit fullrun_ccd6_acisf10802_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct  7 18:51:27 2011] Spatial fit model total counts = 73.850200, observed total counts = 73.000000
[Fri Oct  7 18:51:27 2011] Offset between fit and detection position for source 8 = 0.691310 pixels
[Fri Oct  7 18:51:27 2011] 73.984800 total counts/ 0.000000 bgd. counts: snr = 756494752116760.000000
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.691310 pixels
  Position = (1060.5, 598.2) = 2 30 0.73 -29 40 58.5
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 74.0 +/- 8.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Fri Oct  7 18:51:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 18:51:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 18:51:27 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 18:51:27 2011] Source does appear to be extended
[Fri Oct  7 18:51:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 18:51:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 18:51:50 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Fri Oct  7 18:51:50 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.153
[Fri Oct  7 18:51:50 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.90"
[Fri Oct  7 18:51:52 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct  7 18:51:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10802_pi14-548_cl_pass1_src2.csv
[Fri Oct  7 18:51:52 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct  7 18:51:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10802_pi14-548_cl_pass1_src2.csv
[Fri Oct  7 18:51:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10802_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10802_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 18:51:55 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct  7 18:51:55 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct  7 18:51:55 2011] Fit fullrun_ccd6_acisf10802_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct  7 18:52:02 2011] Spatial fit model total counts = 72.090400, observed total counts = 74.000000
[Fri Oct  7 18:52:02 2011] Offset between fit and detection position for source 8 = 0.013627 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.013627 pixels
  Position = (1060.5, 598.2) = 2 30 0.73 -29 40 58.5
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 72.3 +/- 8.5
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Fri Oct  7 18:52:02 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 18:52:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 18:52:02 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 18:52:02 2011] Source does appear to be extended
[Fri Oct  7 18:52:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 18:53:18 2011] Not overwriting source region fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src8_src.reg
[Fri Oct  7 18:53:18 2011] Extracting stamp from image fullrun_ccd6_acisf10802_pi14-548_cl_sm2.00.img.gz, (1019, 556) - (1102, 640)
[Fri Oct  7 18:53:18 2011] Writing fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src8.gif
[Fri Oct  7 18:53:26 2011] ../../acisf10802/products/events/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src8_src.evt and ../../acisf10802/products/events/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Fri Oct  7 18:53:26 2011] Size of ../../acisf10802/products/events/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src8_src.evt.gz[events] = 73 counts
[Fri Oct  7 18:53:26 2011] Mean chipx,y = (878.90, 710.81)
[Fri Oct  7 18:53:26 2011] Mean tdetx,y = (3753.90, 2412.81)
[Fri Oct  7 18:53:26 2011] chipx,y range = (862.00-898.00, 692.00-728.00)
[Fri Oct  7 18:53:26 2011] Size of ../../acisf10802/products/events/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 21 counts
[Fri Oct  7 18:53:26 2011] ../../acisf10802/products/images/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src8_src.img and ../../acisf10802/products/images/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Fri Oct  7 18:53:26 2011] ../../acisf10802/products/spectra/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src8_src.pi and ../../acisf10802/products/spectra/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Fri Oct  7 18:53:26 2011] Not generating rmf since there are only 72 counts
[Fri Oct  7 18:53:32 2011] ../../acisf10802/products/lightcurves/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src8_src.lc and ../../acisf10802/products/lightcurves/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Fri Oct  7 18:54:30 2011] 202.678
[Fri Oct  7 18:55:40 2011] Updating aperture counts using extracted products
[Fri Oct  7 18:55:40 2011] Error reading totcts from fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src8_src.pi.gz
[Fri Oct  7 18:55:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 18:55:40 2011] Using photon index=1.80, rate=0.00229, arf fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src8.arf
[Fri Oct  7 18:55:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 18:55:40 2011] Updating source flux to 2.5e-14
[Fri Oct  7 18:55:54 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting