[Fri Oct  7 18:50:20 2011] Detection parameters:
  Position = (509.8, 356.3) = 2 30 21.52 -29 42 57.1
  Extent = 2.9" x 2.2", rotation angle = 76 degrees
  Source counts = 133.9 +/- 12.5
  Background counts = 21.1
  Rate = 0.004 +/- 0.0004

[Fri Oct  7 18:50:21 2011] Off-axis axis estimate = 8.13'
[Fri Oct  7 18:51:20 2011] Using EEF radius (= 2.92 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 18:51:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 18:51:20 2011] Initial guess for spatial extent in simple fitting = 2.92"
[Fri Oct  7 18:51:20 2011] source mask rpix=5.9, npix_max = 165, mask sum = 169, frac = 1.020
[Fri Oct  7 18:51:20 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.92"
[Fri Oct  7 18:51:20 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 18:51:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10802_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 18:51:20 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 18:51:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10802_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 18:51:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10802_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10802_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 18:51:20 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 18:51:20 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 18:51:20 2011] Fit fullrun_ccd6_acisf10802_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 18:51:27 2011] Spatial fit model total counts = 187.356000, observed total counts = 188.000000
[Fri Oct  7 18:51:27 2011] Offset between fit and detection position for source 1 = 0.638938 pixels
[Fri Oct  7 18:51:27 2011] 188.330900 total counts/ 48.547900 bgd. counts: snr = 20.061765
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.638938 pixels
  Position = (510.4, 356.5) = 2 30 21.51 -29 42 57.3
  Extent = 3.3 (2.7-3.4)", rotation angle = 0
  Source counts = 139.8 +/- 13.7
  Background counts = 48.5
  Rate = 0.004 +/- 0.0004
[Fri Oct  7 18:51:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 18:51:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 18:51:27 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 18:51:27 2011] Source does appear to be extended
[Fri Oct  7 18:51:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 18:51:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 18:51:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 18:51:50 2011] Initial guess for spatial extent in simple fitting = 3.35"
[Fri Oct  7 18:51:50 2011] source mask rpix=6.8, npix_max = 213, mask sum = 225, frac = 1.053
[Fri Oct  7 18:51:50 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.35"
[Fri Oct  7 18:51:52 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 18:51:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10802_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 18:51:52 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 18:51:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10802_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 18:51:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10802_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10802_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 18:51:55 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 18:51:55 2011] fullrun_ccd6_acisf10802_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 18:51:55 2011] Fit fullrun_ccd6_acisf10802_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 18:52:02 2011] Spatial fit model total counts = 194.858000, observed total counts = 195.000000
[Fri Oct  7 18:52:02 2011] Offset between fit and detection position for source 1 = 0.437914 pixels
[Fri Oct  7 18:52:02 2011] 195.425900 total counts/ 47.816900 bgd. counts: snr = 21.346276
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.437914 pixels
  Position = (510.8, 356.3) = 2 30 21.50 -29 42 57.3
  Extent = 3.5 (3.0-4.2)", rotation angle = 0
  Source counts = 147.6 +/- 14.0
  Background counts = 47.8
  Rate = 0.005 +/- 0.0004
[Fri Oct  7 18:52:02 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 18:52:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 18:52:02 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 18:52:02 2011] Source does appear to be extended
[Fri Oct  7 18:52:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 18:53:18 2011] Not overwriting source region fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1_src.reg
[Fri Oct  7 18:53:18 2011] Extracting stamp from image fullrun_ccd6_acisf10802_pi14-548_cl_sm2.00.img.gz, (352, 197) - (670, 515)
[Fri Oct  7 18:53:18 2011] Writing fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1.gif
[Fri Oct  7 18:53:21 2011] ../../acisf10802/products/events/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1_src.evt and ../../acisf10802/products/events/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct  7 18:53:21 2011] Size of ../../acisf10802/products/events/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1_src.evt.gz[events] = 195 counts
[Fri Oct  7 18:53:21 2011] Mean chipx,y = (280.75, 746.31)
[Fri Oct  7 18:53:21 2011] Mean tdetx,y = (3155.75, 2448.31)
[Fri Oct  7 18:53:21 2011] chipx,y range = (243.00-321.00, 710.00-785.00)
[Fri Oct  7 18:53:21 2011] Size of ../../acisf10802/products/events/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 255 counts
[Fri Oct  7 18:53:21 2011] ../../acisf10802/products/images/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1_src.img and ../../acisf10802/products/images/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct  7 18:53:21 2011] ../../acisf10802/products/spectra/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1_src.pi and ../../acisf10802/products/spectra/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct  7 18:53:26 2011] ../../acisf10802/products/lightcurves/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1_src.lc and ../../acisf10802/products/lightcurves/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct  7 18:54:30 2011] Keeping rmf generated by specextract
[Fri Oct  7 18:54:30 2011] 175.058
[Fri Oct  7 18:55:40 2011] Updating aperture counts using extracted products
[Fri Oct  7 18:55:40 2011] Error reading totcts from fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct  7 18:55:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 18:55:40 2011] Using photon index=1.80, rate=0.00467, arf fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 18:55:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 18:55:40 2011] Updating source flux to 5.7e-14
[Fri Oct  7 18:56:02 2011] Reading fit data from acisf10802/analysis//spectral/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct  7 18:56:02 2011] Spectral fit parameter nH value = 4.12441e+20
[Fri Oct  7 18:56:02 2011] Spectral fit parameter PhoIndex value = 1.66288
[Fri Oct  7 18:56:02 2011] Failed to get F(0.3-8.0) from acisf10802/analysis//spectral/fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 18:56:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 18:56:02 2011] Using Nh = 4.1e+20, photon index=1.66, rate=0.00467, arf fullrun_ccd6_acisf10802_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 18:56:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 18:56:02 2011] Updating source flux to 5.9e-14