[Fri Aug 31 00:44:39 2012] Detection parameters:
  Position = (458.8, 706.7) = 3 9 32.68 -20 31 28.2
  Extent = 0.7" x 0.5", rotation angle = 156 degrees
  Source counts = 23.9 +/- 5.1
  Background counts = 2.1
  Rate = 0.0005 +/- 0.0001

[Fri Aug 31 00:44:39 2012] Off-axis axis estimate = 5.16'
[Fri Aug 31 00:45:45 2012] Using EEF radius (= 1.25 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:45:45 2012] Initial guess for spatial extent in simple fitting = 1.25"
[Fri Aug 31 00:45:45 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978
[Fri Aug 31 00:45:45 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 1.25"
[Fri Aug 31 00:45:48 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass0_src14.ximg exists
[Fri Aug 31 00:45:48 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10798_pi14-548_cl_pass0_src14.csv
[Fri Aug 31 00:45:48 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass0_src14_1.ximg exists
[Fri Aug 31 00:45:48 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10798_pi14-548_cl_pass0_src14.csv
[Fri Aug 31 00:45:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10798_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10798_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:45:48 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Fri Aug 31 00:45:48 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Aug 31 00:45:48 2012] Fit fullrun_ccd3_acisf10798_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Aug 31 00:46:05 2012] Spatial fit model total counts = 30.012200, observed total counts = 30.000000
[Fri Aug 31 00:46:05 2012] Offset between fit and detection position for source 30 = 0.962985 pixels
[Fri Aug 31 00:46:05 2012] 29.842710 total counts/ 3.042910 bgd. counts: snr = 15.363388
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.962985 pixels
  Position = (459.8, 706.7) = 3 9 32.67 -20 31 28.4
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 26.8 +/- 5.5
  Background counts = 3.0
  Rate = 0.0005 +/- 0.0001
[Fri Aug 31 00:46:06 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:46:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:46:06 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:46:06 2012] Source does appear to be extended
[Fri Aug 31 00:46:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:46:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:46:31 2012] Initial guess for spatial extent in simple fitting = 1.05"
[Fri Aug 31 00:46:31 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.903
[Fri Aug 31 00:46:31 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 1.05"
[Fri Aug 31 00:46:33 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass1_src14.ximg exists
[Fri Aug 31 00:46:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10798_pi14-548_cl_pass1_src14.csv
[Fri Aug 31 00:46:33 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass1_src14_1.ximg exists
[Fri Aug 31 00:46:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10798_pi14-548_cl_pass1_src14.csv
[Fri Aug 31 00:46:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10798_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10798_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:46:33 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Fri Aug 31 00:46:33 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Aug 31 00:46:33 2012] Fit fullrun_ccd3_acisf10798_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Aug 31 00:46:49 2012] Spatial fit model total counts = 29.555300, observed total counts = 30.000000
[Fri Aug 31 00:46:49 2012] Offset between fit and detection position for source 30 = 0.050430 pixels
[Fri Aug 31 00:46:49 2012] 29.312640 total counts/ 3.404240 bgd. counts: snr = 14.042050
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.050430 pixels
  Position = (459.8, 706.7) = 3 9 32.67 -20 31 28.4
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 25.9 +/- 5.4
  Background counts = 3.4
  Rate = 0.0005 +/- 0.0001
[Fri Aug 31 00:46:49 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:46:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:46:49 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:46:49 2012] Source does appear to be extended
[Fri Aug 31 00:46:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:51:25 2012] Not overwriting source region fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src30_src.reg
[Fri Aug 31 00:51:25 2012] Extracting stamp from image fullrun_ccd3_acisf10798_pi14-548_cl_sm2.00.img.gz, (414, 661) - (506, 753)
[Fri Aug 31 00:51:25 2012] Writing fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src30.gif
[Fri Aug 31 00:52:06 2012] ../../acisf10798/products/events/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src30_src.evt and ../../acisf10798/products/events/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Fri Aug 31 00:52:06 2012] Size of ../../acisf10798/products/events/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src30_src.evt.gz[events] = 30 counts
[Fri Aug 31 00:52:06 2012] Mean chipx,y = (435.80, 663.67)
[Fri Aug 31 00:52:06 2012] Mean tdetx,y = (4468.33, 3496.80)
[Fri Aug 31 00:52:06 2012] chipx,y range = (417.00-453.00, 644.00-683.00)
[Fri Aug 31 00:52:06 2012] Size of ../../acisf10798/products/events/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 50 counts
[Fri Aug 31 00:52:06 2012] ../../acisf10798/products/images/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src30_src.img and ../../acisf10798/products/images/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Fri Aug 31 00:52:06 2012] ../../acisf10798/products/spectra/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src30_src.pi and ../../acisf10798/products/spectra/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Fri Aug 31 00:52:06 2012] Not generating rmf since there are only 25 counts
[Fri Aug 31 00:52:09 2012] ../../acisf10798/products/lightcurves/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src30_src.lc and ../../acisf10798/products/lightcurves/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Fri Aug 31 00:53:23 2012] 182.482
[Fri Aug 31 00:53:39 2012] Updating aperture counts using extracted products
[Fri Aug 31 00:53:39 2012] Error reading totcts from fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src30_src.pi.gz
[Fri Aug 31 00:53:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 31 00:53:40 2012] Using photon index=1.80, rate=0.00049, arf fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src30.arf
[Fri Aug 31 00:53:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug 31 00:53:40 2012] Updating source flux to 6.3e-15
[Fri Aug 31 00:54:04 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting