[Fri Aug 31 00:44:38 2012] Detection parameters:
  Position = (216.3, 578.9) = 3 9 41.18 -20 32 31.1
  Extent = 0.6" x 0.5", rotation angle = 115 degrees
  Source counts = 74.6 +/- 8.8
  Background counts = 2.4
  Rate = 0.001 +/- 0.0002

[Fri Aug 31 00:44:39 2012] Off-axis axis estimate = 3.10'
[Fri Aug 31 00:45:45 2012] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:45:45 2012] Initial guess for spatial extent in simple fitting = 0.60"
[Fri Aug 31 00:45:45 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.014
[Fri Aug 31 00:45:45 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 0.60"
[Fri Aug 31 00:45:47 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass0_src7.ximg exists
[Fri Aug 31 00:45:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10798_pi14-548_cl_pass0_src7.csv
[Fri Aug 31 00:45:48 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Aug 31 00:45:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10798_pi14-548_cl_pass0_src7.csv
[Fri Aug 31 00:45:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10798_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10798_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:45:48 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Aug 31 00:45:48 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Aug 31 00:45:48 2012] Fit fullrun_ccd3_acisf10798_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Aug 31 00:46:05 2012] Spatial fit model total counts = 78.929300, observed total counts = 79.000000
[Fri Aug 31 00:46:05 2012] Offset between fit and detection position for source 20 = 0.579948 pixels
[Fri Aug 31 00:46:05 2012] 79.106040 total counts/ 7.865940 bgd. counts: snr = 25.400906
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.579948 pixels
  Position = (216.6, 579.3) = 3 9 41.18 -20 32 31.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 71.2 +/- 8.9
  Background counts = 7.9
  Rate = 0.001 +/- 0.0002
[Fri Aug 31 00:46:06 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:46:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:46:06 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:46:06 2012] Source does appear to be extended
[Fri Aug 31 00:46:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:46:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:46:31 2012] Initial guess for spatial extent in simple fitting = 0.60"
[Fri Aug 31 00:46:31 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.770
[Fri Aug 31 00:46:31 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 0.60"
[Fri Aug 31 00:46:33 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass1_src7.ximg exists
[Fri Aug 31 00:46:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10798_pi14-548_cl_pass1_src7.csv
[Fri Aug 31 00:46:33 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Aug 31 00:46:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10798_pi14-548_cl_pass1_src7.csv
[Fri Aug 31 00:46:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10798_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10798_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:46:33 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Aug 31 00:46:33 2012] fullrun_ccd3_acisf10798_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Aug 31 00:46:33 2012] Fit fullrun_ccd3_acisf10798_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Aug 31 00:46:49 2012] Spatial fit model total counts = 78.933200, observed total counts = 79.000000
[Fri Aug 31 00:46:49 2012] Offset between fit and detection position for source 20 = 0.001949 pixels
[Fri Aug 31 00:46:49 2012] 79.117080 total counts/ 7.879880 bgd. counts: snr = 25.377395
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.001949 pixels
  Position = (216.6, 579.3) = 3 9 41.18 -20 32 31.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 71.2 +/- 8.9
  Background counts = 7.9
  Rate = 0.001 +/- 0.0002
[Fri Aug 31 00:46:49 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:46:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:46:49 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:46:49 2012] Source does appear to be extended
[Fri Aug 31 00:46:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:51:25 2012] Not overwriting source region fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src20_src.reg
[Fri Aug 31 00:51:25 2012] Extracting stamp from image fullrun_ccd3_acisf10798_pi14-548_cl_sm2.00.img.gz, (189, 552) - (244, 607)
[Fri Aug 31 00:51:25 2012] Writing fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src20.gif
[Fri Aug 31 00:51:46 2012] ../../acisf10798/products/events/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src20_src.evt and ../../acisf10798/products/events/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Fri Aug 31 00:51:46 2012] Size of ../../acisf10798/products/events/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src20_src.evt.gz[events] = 75 counts
[Fri Aug 31 00:51:46 2012] Mean chipx,y = (602.59, 880.45)
[Fri Aug 31 00:51:46 2012] Mean tdetx,y = (4251.55, 3663.59)
[Fri Aug 31 00:51:46 2012] chipx,y range = (584.00-621.00, 863.00-897.00)
[Fri Aug 31 00:51:46 2012] Size of ../../acisf10798/products/events/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 14 counts
[Fri Aug 31 00:51:46 2012] ../../acisf10798/products/images/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src20_src.img and ../../acisf10798/products/images/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Fri Aug 31 00:51:46 2012] ../../acisf10798/products/spectra/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src20_src.pi and ../../acisf10798/products/spectra/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Fri Aug 31 00:51:46 2012] Not generating rmf since there are only 71 counts
[Fri Aug 31 00:51:49 2012] ../../acisf10798/products/lightcurves/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src20_src.lc and ../../acisf10798/products/lightcurves/fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Fri Aug 31 00:53:23 2012] 191.417
[Fri Aug 31 00:53:39 2012] Updating aperture counts using extracted products
[Fri Aug 31 00:53:39 2012] Error reading totcts from fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src20_src.pi.gz
[Fri Aug 31 00:53:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 31 00:53:40 2012] Using photon index=1.80, rate=0.00135, arf fullrun_ccd3_acisf10798_pi14-548_pass1_cl_src20.arf
[Fri Aug 31 00:53:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug 31 00:53:40 2012] Updating source flux to 1.6e-14
[Fri Aug 31 00:54:04 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting