[Fri Aug 31 00:44:32 2012] Detection parameters:
  Position = (505.1, 929.1) = 3 10 13.52 -20 36 30.5
  Extent = 2.3" x 1.7", rotation angle = 79 degrees
  Source counts = 44.4 +/- 8.2
  Background counts = 23.6
  Rate = 0.0008 +/- 0.0002

[Fri Aug 31 00:44:32 2012] Off-axis axis estimate = 6.10'
[Fri Aug 31 00:45:39 2012] Using EEF radius (= 1.68 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:45:39 2012] Initial guess for spatial extent in simple fitting = 1.68"
[Fri Aug 31 00:45:39 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.046
[Fri Aug 31 00:45:39 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 1.68"
[Fri Aug 31 00:45:40 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src17.ximg exists
[Fri Aug 31 00:45:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src17.csv
[Fri Aug 31 00:45:40 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src17_1.ximg exists
[Fri Aug 31 00:45:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src17.csv
[Fri Aug 31 00:45:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:45:41 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Fri Aug 31 00:45:41 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Aug 31 00:45:41 2012] Fit fullrun_ccd0_acisf10798_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Aug 31 00:45:56 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 19.025081 pixels away
[Fri Aug 31 00:45:56 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:45:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:45:56 2012] Assessing source extent using major
[Fri Aug 31 00:45:56 2012] Source does appear to be extended
[Fri Aug 31 00:45:56 2012] Computing asymmetry using major and minor axis, asym = 1.37
[Fri Aug 31 00:46:27 2012] Using EEF radius (= 1.68 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:46:27 2012] Initial guess for spatial extent in simple fitting = 1.68"
[Fri Aug 31 00:46:27 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.046
[Fri Aug 31 00:46:27 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 1.68"
[Fri Aug 31 00:46:28 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass1_src16.ximg exists
[Fri Aug 31 00:46:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10798_pi14-548_cl_pass1_src16.csv
[Fri Aug 31 00:46:28 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass1_src16_1.ximg exists
[Fri Aug 31 00:46:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10798_pi14-548_cl_pass1_src16.csv
[Fri Aug 31 00:46:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10798_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10798_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:46:29 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Fri Aug 31 00:46:29 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Aug 31 00:46:29 2012] Fit fullrun_ccd0_acisf10798_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Aug 31 00:46:41 2012] Spatial fit model total counts = 74.998300, observed total counts = 75.000000
[Fri Aug 31 00:46:41 2012] Offset between fit and detection position for source 30 = 0.868157 pixels
[Fri Aug 31 00:46:41 2012] 75.176400 total counts/ 34.575000 bgd. counts: snr = 6.904940
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.868157 pixels
  Position = (505.3, 929.9) = 3 10 13.54 -20 36 30.3
  Extent = 2.2 (1.5-3.4)", rotation angle = 0
  Source counts = 40.6 +/- 8.7
  Background counts = 34.6
  Rate = 0.0008 +/- 0.0002
[Fri Aug 31 00:46:41 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:46:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:46:41 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:46:41 2012] Source does appear to be extended
[Fri Aug 31 00:46:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:47:12 2012] Not overwriting source region fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30_src.reg
[Fri Aug 31 00:47:12 2012] Extracting stamp from image fullrun_ccd0_acisf10798_pi14-548_cl_sm2.00.img.gz, (403, 827) - (608, 1033)
[Fri Aug 31 00:47:12 2012] Writing fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30.gif
[Fri Aug 31 00:48:14 2012] ../../acisf10798/products/events/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30_src.evt and ../../acisf10798/products/events/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Fri Aug 31 00:48:14 2012] Size of ../../acisf10798/products/events/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30_src.evt.gz[events] = 94 counts
[Fri Aug 31 00:48:14 2012] Mean chipx,y = (824.06, 368.13)
[Fri Aug 31 00:48:14 2012] Mean tdetx,y = (3429.13, 4307.94)
[Fri Aug 31 00:48:14 2012] chipx,y range = (793.00-854.00, 342.00-398.00)
[Fri Aug 31 00:48:14 2012] Size of ../../acisf10798/products/events/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 497 counts
[Fri Aug 31 00:48:14 2012] ../../acisf10798/products/images/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30_src.img and ../../acisf10798/products/images/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Fri Aug 31 00:48:14 2012] ../../acisf10798/products/spectra/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30_src.pi and ../../acisf10798/products/spectra/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Fri Aug 31 00:48:14 2012] Not generating rmf since there are only 40 counts
[Fri Aug 31 00:48:17 2012] ../../acisf10798/products/lightcurves/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30_src.lc and ../../acisf10798/products/lightcurves/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Fri Aug 31 00:48:25 2012] 180.365
[Fri Aug 31 00:53:38 2012] Updating aperture counts using extracted products
[Fri Aug 31 00:53:38 2012] Error reading totcts from fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30_src.pi.gz
[Fri Aug 31 00:53:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 31 00:53:38 2012] Using photon index=1.80, rate=0.000767, arf fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30.arf
[Fri Aug 31 00:53:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug 31 00:53:38 2012] Updating source flux to 9.9e-15
[Fri Aug 31 00:53:44 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 31 00:53:47 2012] acisf10798/analysis//spectral/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete