[Fri Aug 31 00:44:30 2012] Detection parameters: Position = (328.3, 415.2) = 3 10 19.73 -20 40 43.3 Extent = 3.2" x 2.6", rotation angle = 177 degrees Source counts = 37.9 +/- 7.7 Background counts = 22.1 Rate = 0.0007 +/- 0.0001 [Fri Aug 31 00:44:32 2012] Off-axis axis estimate = 9.25' [Fri Aug 31 00:45:39 2012] Using EEF radius (= 3.79 ")to estimate initial spatial extent for simple fitting [Fri Aug 31 00:45:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri Aug 31 00:45:39 2012] Initial guess for spatial extent in simple fitting = 3.79" [Fri Aug 31 00:45:39 2012] source mask rpix=7.7, npix_max = 268, mask sum = 272, frac = 1.012 [Fri Aug 31 00:45:39 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 3.79" [Fri Aug 31 00:45:40 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src11.ximg exists [Fri Aug 31 00:45:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src11.csv [Fri Aug 31 00:45:40 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src11_1.ximg exists [Fri Aug 31 00:45:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src11.csv [Fri Aug 31 00:45:40 2012] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Aug 31 00:45:41 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass0_tfrozen_src11.ximg exists [Fri Aug 31 00:45:41 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists [Fri Aug 31 00:45:41 2012] Fit fullrun_ccd0_acisf10798_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly [Fri Aug 31 00:45:56 2012] Spatial fit model total counts = 144.389000, observed total counts = 144.000000 [Fri Aug 31 00:45:56 2012] Offset between fit and detection position for source 16 = 2.919593 pixels [Fri Aug 31 00:45:56 2012] 143.607300 total counts/ 125.028000 bgd. counts: snr = 1.661597 Spatial fit parameters: Offset between fit and detection position for source 16 = 2.919593 pixels Position = (329.3, 417.9) = 3 10 19.72 -20 40 42.2 Extent = 1.3 (0.9-2.1)", rotation angle = 0 Source counts = 18.6 +/- 12.0 Background counts = 125.0 Rate = 0.0004 +/- 0.0002 Deleting source due to low Poisson probability