[Fri Aug 31 00:44:30 2012] Detection parameters:
  Position = (829.2, 968.1) = 3 10 2.17 -20 36 11.4
  Extent = 0.8" x 0.6", rotation angle = 180 degrees
  Source counts = 39.5 +/- 6.6
  Background counts = 3.5
  Rate = 0.0007 +/- 0.0001

[Fri Aug 31 00:44:32 2012] Off-axis axis estimate = 3.45'
[Fri Aug 31 00:45:39 2012] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:45:39 2012] Initial guess for spatial extent in simple fitting = 0.68"
[Fri Aug 31 00:45:39 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.132
[Fri Aug 31 00:45:39 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 0.68"
[Fri Aug 31 00:45:40 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src7.ximg exists
[Fri Aug 31 00:45:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src7.csv
[Fri Aug 31 00:45:40 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Aug 31 00:45:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src7.csv
[Fri Aug 31 00:45:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10798_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:45:41 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Aug 31 00:45:41 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Aug 31 00:45:41 2012] Fit fullrun_ccd0_acisf10798_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Aug 31 00:45:56 2012] Spatial fit model total counts = 43.795400, observed total counts = 44.000000
[Fri Aug 31 00:45:56 2012] Offset between fit and detection position for source 10 = 0.439810 pixels
[Fri Aug 31 00:45:56 2012] 44.989040 total counts/ 7.348640 bgd. counts: snr = 13.885155
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.439810 pixels
  Position = (829.4, 968.4) = 3 10 2.18 -20 36 11.5
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 37.6 +/- 6.7
  Background counts = 7.3
  Rate = 0.0007 +/- 0.0001
[Fri Aug 31 00:45:56 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:45:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:45:56 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:45:56 2012] Source does appear to be extended
[Fri Aug 31 00:45:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:46:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:46:27 2012] Initial guess for spatial extent in simple fitting = 0.74"
[Fri Aug 31 00:46:27 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.991
[Fri Aug 31 00:46:27 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 0.74"
[Fri Aug 31 00:46:28 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass1_src7.ximg exists
[Fri Aug 31 00:46:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10798_pi14-548_cl_pass1_src7.csv
[Fri Aug 31 00:46:28 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Aug 31 00:46:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10798_pi14-548_cl_pass1_src7.csv
[Fri Aug 31 00:46:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10798_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10798_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:46:28 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Aug 31 00:46:28 2012] fullrun_ccd0_acisf10798_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Aug 31 00:46:28 2012] Fit fullrun_ccd0_acisf10798_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Aug 31 00:46:41 2012] Spatial fit model total counts = 43.514700, observed total counts = 44.000000
[Fri Aug 31 00:46:41 2012] Offset between fit and detection position for source 10 = 0.006828 pixels
[Fri Aug 31 00:46:41 2012] 44.674900 total counts/ 6.928800 bgd. counts: snr = 14.339799
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.006828 pixels
  Position = (829.4, 968.5) = 3 10 2.18 -20 36 11.5
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 37.7 +/- 6.7
  Background counts = 6.9
  Rate = 0.0007 +/- 0.0001
[Fri Aug 31 00:46:41 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:46:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:46:41 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:46:41 2012] Source does appear to be extended
[Fri Aug 31 00:46:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:47:12 2012] Not overwriting source region fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10_src.reg
[Fri Aug 31 00:47:12 2012] Extracting stamp from image fullrun_ccd0_acisf10798_pi14-548_cl_sm2.00.img.gz, (794, 933) - (864, 1003)
[Fri Aug 31 00:47:12 2012] Writing fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10.gif
[Fri Aug 31 00:47:41 2012] ../../acisf10798/products/events/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10_src.evt and ../../acisf10798/products/events/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Aug 31 00:47:41 2012] Size of ../../acisf10798/products/events/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10_src.evt.gz[events] = 42 counts
[Fri Aug 31 00:47:41 2012] Mean chipx,y = (922.38, 683.67)
[Fri Aug 31 00:47:41 2012] Mean tdetx,y = (3744.67, 4209.62)
[Fri Aug 31 00:47:41 2012] chipx,y range = (904.00-941.00, 660.00-699.00)
[Fri Aug 31 00:47:41 2012] Size of ../../acisf10798/products/events/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 17 counts
[Fri Aug 31 00:47:41 2012] ../../acisf10798/products/images/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10_src.img and ../../acisf10798/products/images/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Aug 31 00:47:41 2012] ../../acisf10798/products/spectra/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10_src.pi and ../../acisf10798/products/spectra/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Aug 31 00:47:41 2012] Not generating rmf since there are only 37 counts
[Fri Aug 31 00:47:45 2012] ../../acisf10798/products/lightcurves/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10_src.lc and ../../acisf10798/products/lightcurves/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Aug 31 00:48:25 2012] 183.661
[Fri Aug 31 00:53:37 2012] Updating aperture counts using extracted products
[Fri Aug 31 00:53:37 2012] Error reading totcts from fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Aug 31 00:53:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 31 00:53:38 2012] Using photon index=1.80, rate=0.000713, arf fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10.arf
[Fri Aug 31 00:53:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug 31 00:53:38 2012] Updating source flux to 9e-15
[Fri Aug 31 00:53:44 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 31 00:53:47 2012] acisf10798/analysis//spectral/fullrun_ccd0_acisf10798_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete