[Sat Sep 24 01:50:59 2011] Detection parameters:
  Position = (1033.0, 459.9) = 0 25 43.06 -12 28 42.2
  Extent = 0.9" x 0.7", rotation angle = 19 degrees
  Source counts = 10.0 +/- 3.3
  Background counts = 1.0
  Rate = 0.0004 +/- 0.0001

[Sat Sep 24 01:51:00 2011] Off-axis axis estimate = 4.35'
[Sat Sep 24 01:51:46 2011] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 01:51:46 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Sat Sep 24 01:51:46 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.860
[Sat Sep 24 01:51:46 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.94"
[Sat Sep 24 01:51:47 2011] fullrun_ccd2_acisf10797_pi14-548_cl_pass0_src10.ximg exists
[Sat Sep 24 01:51:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10797_pi14-548_cl_pass0_src10.csv
[Sat Sep 24 01:51:47 2011] fullrun_ccd2_acisf10797_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Sep 24 01:51:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10797_pi14-548_cl_pass0_src10.csv
[Sat Sep 24 01:51:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10797_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10797_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 01:51:47 2011] fullrun_ccd2_acisf10797_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Sep 24 01:51:47 2011] fullrun_ccd2_acisf10797_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Sep 24 01:51:47 2011] Fit fullrun_ccd2_acisf10797_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Sep 24 01:51:55 2011] Source 9 is offset by -1.249125 and 6.510883 pixels which is larger than
2 X fitted extent = 0.955919 x 0.955919, not incorporating fit results
[Sat Sep 24 01:51:55 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 01:51:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 01:51:55 2011] Assessing source extent using major
[Sat Sep 24 01:51:55 2011] Source does appear to be extended
[Sat Sep 24 01:51:55 2011] Computing asymmetry using major and minor axis, asym = 1.40
[Sat Sep 24 01:52:16 2011] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 01:52:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 01:52:16 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Sat Sep 24 01:52:16 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.860
[Sat Sep 24 01:52:16 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.94"
[Sat Sep 24 01:52:17 2011] fullrun_ccd2_acisf10797_pi14-548_cl_pass1_src10.ximg exists
[Sat Sep 24 01:52:17 2011] fullrun_ccd2_acisf10797_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Sep 24 01:52:17 2011] Fit fullrun_ccd2_acisf10797_pi14-548_cl_pass1_src10 appears to have run properly
[Sat Sep 24 01:52:17 2011] fullrun_ccd2_acisf10797_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Sep 24 01:52:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10797_pi14-548_cl_pass1_tfrozen_src10.csv
[Sat Sep 24 01:52:17 2011] fullrun_ccd2_acisf10797_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Sep 24 01:52:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10797_pi14-548_cl_pass1_tfrozen_src10.csv
[Sat Sep 24 01:52:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10797_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10797_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 01:52:25 2011] Spatial fit model total counts = 12.981900, observed total counts = 14.000000
[Sat Sep 24 01:52:25 2011] Offset between fit and detection position for source 9 = 0.507924 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.507924 pixels
  Position = (1033.5, 460.1) = 0 25 43.06 -12 28 42.4
  Extent = 1.2 (0.9-1.5)", rotation angle = 0
  Source counts = 12.8 +/- 3.6
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0002
[Sat Sep 24 01:52:25 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 01:52:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 01:52:25 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 01:52:25 2011] Source does appear to be extended
[Sat Sep 24 01:52:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 01:54:00 2011] Not overwriting source region fullrun_ccd2_acisf10797_pi14-548_pass1_cl_src9_src.reg
[Sat Sep 24 01:54:00 2011] Extracting stamp from image fullrun_ccd2_acisf10797_pi14-548_cl_sm2.00.img.gz, (980, 406) - (1087, 514)
[Sat Sep 24 01:54:00 2011] Writing fullrun_ccd2_acisf10797_pi14-548_pass1_cl_src9.gif
[Sat Sep 24 01:54:40 2011] ../../acisf10797/products/events/fullrun_ccd2_acisf10797_pi14-548_pass1_cl_src9_src.evt and ../../acisf10797/products/events/fullrun_ccd2_acisf10797_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sat Sep 24 01:54:40 2011] Size of ../../acisf10797/products/events/fullrun_ccd2_acisf10797_pi14-548_pass1_cl_src9_src.evt.gz[events] = 14 counts
[Sat Sep 24 01:54:40 2011] Mean chipx,y = (107.07, 598.64)
[Sat Sep 24 01:54:40 2011] Mean tdetx,y = (3659.64, 3978.93)
[Sat Sep 24 01:54:40 2011] chipx,y range = (94.00-122.00, 580.00-618.00)
[Sat Sep 24 01:54:40 2011] Size of ../../acisf10797/products/events/fullrun_ccd2_acisf10797_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 20 counts
[Sat Sep 24 01:54:40 2011] ../../acisf10797/products/images/fullrun_ccd2_acisf10797_pi14-548_pass1_cl_src9_src.img and ../../acisf10797/products/images/fullrun_ccd2_acisf10797_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sat Sep 24 01:54:40 2011] ../../acisf10797/products/spectra/fullrun_ccd2_acisf10797_pi14-548_pass1_cl_src9_src.pi and ../../acisf10797/products/spectra/fullrun_ccd2_acisf10797_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sat Sep 24 01:54:40 2011] Not generating rmf since there are only 12 counts
[Sat Sep 24 01:54:44 2011] ../../acisf10797/products/lightcurves/fullrun_ccd2_acisf10797_pi14-548_pass1_cl_src9_src.lc and ../../acisf10797/products/lightcurves/fullrun_ccd2_acisf10797_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sat Sep 24 01:55:45 2011] 191.135
[Sat Sep 24 01:57:10 2011] Updating aperture counts using extracted products
[Sat Sep 24 01:57:10 2011] Error reading totcts from fullrun_ccd2_acisf10797_pi14-548_pass1_cl_src9_src.pi.gz
[Sat Sep 24 01:57:10 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 01:57:10 2011] Using photon index=1.80, rate=0.000538, arf fullrun_ccd2_acisf10797_pi14-548_pass1_cl_src9.arf
[Sat Sep 24 01:57:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 01:57:10 2011] Updating source flux to 6.5e-15
[Sat Sep 24 01:57:19 2011] Flag b found in src. 9 procflags, skipping spectral fitting
[Sat Sep 24 01:57:19 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting