[Thu Sep 22 15:27:55 2011] Detection parameters:
  Position = (173.9, 814.1) = 11 18 16.94 7 45 58.5
  Extent = 0.6" x 0.5", rotation angle = 44 degrees
  Source counts = 608.7 +/- 24.8
  Background counts = 5.3
  Rate = 0.04 +/- 0.002

[Thu Sep 22 15:27:56 2011] Off-axis axis estimate = 0.29'
[Thu Sep 22 15:28:24 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 15:28:24 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Thu Sep 22 15:28:24 2011] source mask rpix=0.8, npix_max = 7, mask sum = 4, frac = 0.571
[Thu Sep 22 15:28:24 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.41"
[Thu Sep 22 15:28:24 2011] fullrun_ccd7_acisf10795_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 15:28:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10795_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 15:28:24 2011] fullrun_ccd7_acisf10795_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 15:28:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10795_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 15:28:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10795_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10795_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 15:28:25 2011] fullrun_ccd7_acisf10795_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 15:28:26 2011] fullrun_ccd7_acisf10795_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 15:28:26 2011] Fit fullrun_ccd7_acisf10795_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 15:28:30 2011] Spatial fit model total counts = 602.578000, observed total counts = 613.000000
[Thu Sep 22 15:28:30 2011] Offset between fit and detection position for source 1 = 0.156331 pixels
[Thu Sep 22 15:28:30 2011] 623.744000 total counts/ 158.105000 bgd. counts: snr = 37.031947
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.156331 pixels
  Position = (173.9, 814.2) = 11 18 16.96 7 45 58.3
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 465.6 +/- 25.0
  Background counts = 158.1
  Rate = 0.03 +/- 0.002
[Thu Sep 22 15:28:30 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 15:28:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 15:28:30 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 15:28:30 2011] Source does appear to be extended
[Thu Sep 22 15:28:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 15:28:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 15:28:44 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Thu Sep 22 15:28:44 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.811
[Thu Sep 22 15:28:44 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.42"
[Thu Sep 22 15:28:44 2011] fullrun_ccd7_acisf10795_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 15:28:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10795_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 15:28:45 2011] fullrun_ccd7_acisf10795_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 15:28:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10795_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 15:28:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10795_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10795_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 15:28:45 2011] fullrun_ccd7_acisf10795_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 15:28:45 2011] fullrun_ccd7_acisf10795_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 15:28:45 2011] Fit fullrun_ccd7_acisf10795_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 15:28:58 2011] Spatial fit model total counts = 594.365000, observed total counts = 613.000000
[Thu Sep 22 15:28:58 2011] Offset between fit and detection position for source 1 = 0.006187 pixels
[Thu Sep 22 15:28:58 2011] 615.379000 total counts/ 156.373000 bgd. counts: snr = 36.706035
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.006187 pixels
  Position = (173.9, 814.2) = 11 18 16.96 7 45 58.3
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 459.0 +/- 24.8
  Background counts = 156.4
  Rate = 0.03 +/- 0.002
[Thu Sep 22 15:28:58 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 15:28:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 15:28:58 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 15:28:58 2011] Source does appear to be extended
[Thu Sep 22 15:28:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 15:29:33 2011] Not overwriting source region fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1_src.reg
[Thu Sep 22 15:29:33 2011] Extracting stamp from image fullrun_ccd7_acisf10795_pi14-548_cl_sm2.00.img.gz, (154, 795) - (193, 834)
[Thu Sep 22 15:29:33 2011] Writing fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1.gif
[Thu Sep 22 15:29:34 2011] ../../acisf10795/products/events/fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1_src.evt and ../../acisf10795/products/events/fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Sep 22 15:29:34 2011] Size of ../../acisf10795/products/events/fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1_src.evt.gz[events] = 504 counts
[Thu Sep 22 15:29:34 2011] Mean chipx,y = (221.26, 521.60)
[Thu Sep 22 15:29:34 2011] Mean tdetx,y = (4138.26, 2223.60)
[Thu Sep 22 15:29:34 2011] chipx,y range = (203.00-239.00, 503.00-540.00)
[Thu Sep 22 15:29:34 2011] Size of ../../acisf10795/products/events/fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 31 counts
[Thu Sep 22 15:29:34 2011] ../../acisf10795/products/images/fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1_src.img and ../../acisf10795/products/images/fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Sep 22 15:29:34 2011] ../../acisf10795/products/spectra/fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1_src.pi and ../../acisf10795/products/spectra/fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Sep 22 15:29:40 2011] ../../acisf10795/products/lightcurves/fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1_src.lc and ../../acisf10795/products/lightcurves/fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Sep 22 15:29:54 2011] Keeping rmf generated by specextract
[Thu Sep 22 15:29:54 2011] 236.069
[Thu Sep 22 15:29:55 2011] Updating aperture counts using extracted products
[Thu Sep 22 15:29:55 2011] Error reading totcts from fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Sep 22 15:29:55 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 15:29:55 2011] Using photon index=1.80, rate=0.0316, arf fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 15:29:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 15:29:55 2011] Updating source flux to 2.3e-13
[Thu Sep 22 15:30:05 2011] Reading fit data from acisf10795/analysis//spectral/fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1_pl.csv
[Thu Sep 22 15:30:05 2011] Spectral fit parameter nH value = 3.07341e+21
[Thu Sep 22 15:30:05 2011] Spectral fit parameter PhoIndex value = 1.87063
[Thu Sep 22 15:30:05 2011] Failed to get F(0.3-8.0) from acisf10795/analysis//spectral/fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 15:30:05 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 15:30:05 2011] Using Nh = 3.1e+21, photon index=1.87, rate=0.0316, arf fullrun_ccd7_acisf10795_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 15:30:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 15:30:05 2011] Updating source flux to 2.6e-13