[Wed Sep 28 03:11:14 2011] Detection parameters:
  Position = (258.7, 999.6) = 2 28 25.47 0 39 42.2
  Extent = 1.9" x 1.2", rotation angle = 165 degrees
  Source counts = 99.3 +/- 10.2
  Background counts = 5.7
  Rate = 0.005 +/- 0.0005

[Wed Sep 28 03:11:16 2011] Off-axis axis estimate = 6.71'
[Wed Sep 28 03:12:01 2011] Using EEF radius (= 2.01 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 03:12:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 03:12:01 2011] Initial guess for spatial extent in simple fitting = 2.01"
[Wed Sep 28 03:12:01 2011] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.963
[Wed Sep 28 03:12:01 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.01"
[Wed Sep 28 03:12:01 2011] fullrun_ccd3_acisf10794_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 28 03:12:01 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10794_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 03:12:01 2011] fullrun_ccd3_acisf10794_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 28 03:12:01 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10794_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 03:12:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10794_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10794_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 03:12:02 2011] fullrun_ccd3_acisf10794_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 03:12:02 2011] fullrun_ccd3_acisf10794_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 03:12:02 2011] Fit fullrun_ccd3_acisf10794_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 03:12:13 2011] Spatial fit model total counts = 102.281000, observed total counts = 106.000000
[Wed Sep 28 03:12:13 2011] Offset between fit and detection position for source 1 = 0.934630 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.934630 pixels
  Position = (259.5, 1000.1) = 2 28 25.46 0 39 42.2
  Extent = 2.1 (1.8-2.3)", rotation angle = 0
  Source counts = 101.9 +/- 10.1
  Background counts = 0.0
  Rate = 0.005 +/- 0.0005
[Wed Sep 28 03:12:13 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 03:12:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 03:12:13 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 03:12:13 2011] Source does appear to be extended
[Wed Sep 28 03:12:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 03:12:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 03:12:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 03:12:36 2011] Initial guess for spatial extent in simple fitting = 2.06"
[Wed Sep 28 03:12:36 2011] source mask rpix=4.2, npix_max = 87, mask sum = 90, frac = 1.026
[Wed Sep 28 03:12:36 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.06"
[Wed Sep 28 03:12:36 2011] fullrun_ccd3_acisf10794_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 28 03:12:36 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10794_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 03:12:36 2011] fullrun_ccd3_acisf10794_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 28 03:12:36 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10794_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 03:12:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10794_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10794_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 03:12:36 2011] fullrun_ccd3_acisf10794_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 03:12:36 2011] fullrun_ccd3_acisf10794_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 03:12:36 2011] Fit fullrun_ccd3_acisf10794_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 03:12:45 2011] Spatial fit model total counts = 104.104000, observed total counts = 106.000000
[Wed Sep 28 03:12:45 2011] Offset between fit and detection position for source 1 = 0.107605 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.107605 pixels
  Position = (259.6, 1000.1) = 2 28 25.46 0 39 42.2
  Extent = 2.0 (1.8-2.3)", rotation angle = 0
  Source counts = 103.5 +/- 10.2
  Background counts = 0.0
  Rate = 0.006 +/- 0.0005
[Wed Sep 28 03:12:45 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 03:12:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 03:12:45 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 03:12:45 2011] Source does appear to be extended
[Wed Sep 28 03:12:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 03:16:11 2011] Not overwriting source region fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 28 03:16:11 2011] Extracting stamp from image fullrun_ccd3_acisf10794_pi14-548_cl_sm2.00.img.gz, (168, 908) - (352, 1092)
[Wed Sep 28 03:16:11 2011] Writing fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1.gif
[Wed Sep 28 03:16:12 2011] ../../acisf10794/products/events/fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1_src.evt and ../../acisf10794/products/events/fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 28 03:16:12 2011] Size of ../../acisf10794/products/events/fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1_src.evt.gz[events] = 105 counts
[Wed Sep 28 03:16:12 2011] Mean chipx,y = (142.34, 889.45)
[Wed Sep 28 03:16:12 2011] Mean tdetx,y = (4242.55, 3203.34)
[Wed Sep 28 03:16:12 2011] chipx,y range = (122.00-172.00, 865.00-916.00)
[Wed Sep 28 03:16:12 2011] Size of ../../acisf10794/products/events/fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 55 counts
[Wed Sep 28 03:16:12 2011] ../../acisf10794/products/images/fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1_src.img and ../../acisf10794/products/images/fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 28 03:16:12 2011] ../../acisf10794/products/spectra/fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1_src.pi and ../../acisf10794/products/spectra/fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 28 03:16:16 2011] ../../acisf10794/products/lightcurves/fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1_src.lc and ../../acisf10794/products/lightcurves/fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 28 03:17:18 2011] Keeping rmf generated by specextract
[Wed Sep 28 03:17:18 2011] 169.897
[Wed Sep 28 03:17:26 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:17:26 2011] Error reading totcts from fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 28 03:17:26 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:17:26 2011] Using photon index=1.80, rate=0.00553, arf fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 03:17:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 03:17:26 2011] Updating source flux to 7.7e-14
[Wed Sep 28 03:17:43 2011] Reading fit data from acisf10794/analysis//spectral/fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1_pl.csv
[Wed Sep 28 03:17:43 2011] Spectral fit parameter nH value = 1.02732e+21
[Wed Sep 28 03:17:43 2011] Spectral fit parameter PhoIndex value = 2.02581
[Wed Sep 28 03:17:43 2011] Failed to get F(0.3-8.0) from acisf10794/analysis//spectral/fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 03:17:43 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:17:43 2011] Using Nh = 1e+21, photon index=2.03, rate=0.00553, arf fullrun_ccd3_acisf10794_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 03:17:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 03:17:43 2011] Updating source flux to 6.9e-14