[Sat Oct 29 08:24:39 2011] Detection parameters:
  Position = (953.8, 1210.5) = 3 31 17.94 -21 1 57.3
  Extent = 0.7" x 0.5", rotation angle = 30 degrees
  Source counts = 24.7 +/- 5.0
  Background counts = 0.3
  Rate = 0.002 +/- 0.0005

[Sat Oct 29 08:24:40 2011] Off-axis axis estimate = 3.55'
[Sat Oct 29 08:25:19 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 08:25:19 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Sat Oct 29 08:25:19 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.801
[Sat Oct 29 08:25:19 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.71"
[Sat Oct 29 08:25:19 2011] fullrun_ccd1_acisf10790_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct 29 08:25:19 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf10790_pi14-548_cl_pass0_src2.csv
[Sat Oct 29 08:25:19 2011] fullrun_ccd1_acisf10790_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct 29 08:25:19 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf10790_pi14-548_cl_pass0_src2.csv
[Sat Oct 29 08:25:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10790_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10790_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 08:25:19 2011] fullrun_ccd1_acisf10790_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct 29 08:25:19 2011] fullrun_ccd1_acisf10790_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct 29 08:25:19 2011] Fit fullrun_ccd1_acisf10790_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Oct 29 08:25:25 2011] Spatial fit model total counts = 25.831500, observed total counts = 26.000000
[Sat Oct 29 08:25:25 2011] Offset between fit and detection position for source 2 = 0.719897 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.719897 pixels
  Position = (954.3, 1211.0) = 3 31 17.94 -21 1 57.3
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 26.0 +/- 5.1
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Sat Oct 29 08:25:25 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 08:25:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 08:25:25 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 08:25:25 2011] Source does appear to be extended
[Sat Oct 29 08:25:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 08:25:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 08:25:40 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Sat Oct 29 08:25:40 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.194
[Sat Oct 29 08:25:40 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.65"
[Sat Oct 29 08:25:41 2011] fullrun_ccd1_acisf10790_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct 29 08:25:41 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf10790_pi14-548_cl_pass1_src2.csv
[Sat Oct 29 08:25:41 2011] fullrun_ccd1_acisf10790_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct 29 08:25:41 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf10790_pi14-548_cl_pass1_src2.csv
[Sat Oct 29 08:25:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10790_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10790_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 08:25:41 2011] fullrun_ccd1_acisf10790_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct 29 08:25:41 2011] fullrun_ccd1_acisf10790_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct 29 08:25:41 2011] Fit fullrun_ccd1_acisf10790_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Oct 29 08:25:46 2011] Spatial fit model total counts = 25.027700, observed total counts = 26.000000
[Sat Oct 29 08:25:46 2011] Offset between fit and detection position for source 2 = 0.097695 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.097695 pixels
  Position = (954.2, 1210.9) = 3 31 17.94 -21 1 57.3
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 25.2 +/- 5.0
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Sat Oct 29 08:25:46 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 08:25:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 08:25:46 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 08:25:46 2011] Source does appear to be extended
[Sat Oct 29 08:25:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 08:26:17 2011] Not overwriting source region fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 29 08:26:17 2011] Extracting stamp from image fullrun_ccd1_acisf10790_pi14-548_cl_sm2.00.img.gz, (924, 1181) - (984, 1241)
[Sat Oct 29 08:26:17 2011] Writing fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2.gif
[Sat Oct 29 08:26:21 2011] ../../acisf10790/products/events/fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2_src.evt and ../../acisf10790/products/events/fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct 29 08:26:21 2011] Size of ../../acisf10790/products/events/fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2_src.evt.gz[events] = 25 counts
[Sat Oct 29 08:26:21 2011] Mean chipx,y = (25.16, 801.04)
[Sat Oct 29 08:26:21 2011] Mean tdetx,y = (4330.96, 4132.16)
[Sat Oct 29 08:26:21 2011] chipx,y range = (6.00-40.00, 783.00-815.00)
[Sat Oct 29 08:26:21 2011] Size of ../../acisf10790/products/events/fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 1 counts
[Sat Oct 29 08:26:21 2011] ../../acisf10790/products/images/fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2_src.img and ../../acisf10790/products/images/fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct 29 08:26:21 2011] ../../acisf10790/products/spectra/fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2_src.pi and ../../acisf10790/products/spectra/fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct 29 08:26:21 2011] Not generating rmf since there are only 25 counts
[Sat Oct 29 08:26:24 2011] ../../acisf10790/products/lightcurves/fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2_src.lc and ../../acisf10790/products/lightcurves/fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct 29 08:26:44 2011] 189.17
[Sat Oct 29 08:27:31 2011] Updating aperture counts using extracted products
[Sat Oct 29 08:27:31 2011] Error reading totcts from fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct 29 08:27:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 08:27:31 2011] Using photon index=1.80, rate=0.0025, arf fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2.arf
[Sat Oct 29 08:27:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 08:27:31 2011] Updating source flux to 3.1e-14
[Sat Oct 29 08:27:38 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 29 08:27:39 2011] acisf10790/analysis//spectral/fullrun_ccd1_acisf10790_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete