[Thu Sep 29 12:29:21 2011] Detection parameters:
  Position = (708.9, 318.3) = 16 21 24.88 38 10 8.7
  Extent = 0.8" x 0.7", rotation angle = 143 degrees
  Source counts = 381.1 +/- 21.0
  Background counts = 59.9
  Rate = 0.01 +/- 0.0007

[Thu Sep 29 12:29:23 2011] Off-axis axis estimate = 1.65'
[Thu Sep 29 12:30:27 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 12:30:27 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Thu Sep 29 12:30:27 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.868
[Thu Sep 29 12:30:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.40"
[Thu Sep 29 12:30:27 2011] fullrun_ccd3_acisf10785_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 29 12:30:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10785_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 12:30:28 2011] fullrun_ccd3_acisf10785_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 29 12:30:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10785_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 12:30:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10785_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10785_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 12:30:28 2011] fullrun_ccd3_acisf10785_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 12:30:28 2011] fullrun_ccd3_acisf10785_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 12:30:28 2011] Fit fullrun_ccd3_acisf10785_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 12:30:39 2011] Spatial fit model total counts = 619.335000, observed total counts = 602.000000
[Thu Sep 29 12:30:39 2011] Offset between fit and detection position for source 3 = 1.301150 pixels
[Thu Sep 29 12:30:39 2011] 628.015000 total counts/ 362.508000 bgd. counts: snr = 13.944957
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.301150 pixels
  Position = (709.8, 317.4) = 16 21 24.86 38 10 8.0
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 265.5 +/- 25.1
  Background counts = 362.5
  Rate = 0.009 +/- 0.0008
[Thu Sep 29 12:30:39 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 12:30:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 12:30:39 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 12:30:39 2011] Source does appear to be extended
[Thu Sep 29 12:30:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 12:31:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 12:31:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 12:31:12 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Thu Sep 29 12:31:12 2011] source mask rpix=3.0, npix_max = 50, mask sum = 47, frac = 0.933
[Thu Sep 29 12:31:12 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.50"
[Thu Sep 29 12:31:13 2011] fullrun_ccd3_acisf10785_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 29 12:31:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10785_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 12:31:13 2011] fullrun_ccd3_acisf10785_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 29 12:31:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10785_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 12:31:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10785_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10785_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 12:31:13 2011] fullrun_ccd3_acisf10785_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 12:31:13 2011] fullrun_ccd3_acisf10785_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 12:31:13 2011] Fit fullrun_ccd3_acisf10785_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 12:31:30 2011] Warning, spatial fit 1 centroid is now closest to src. 6
[Thu Sep 29 12:31:30 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 12:31:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 12:31:30 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 12:31:30 2011] Source does appear to be extended
[Thu Sep 29 12:31:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 12:43:36 2011] Not overwriting source region fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3_src.reg
[Thu Sep 29 12:43:36 2011] Extracting stamp from image fullrun_ccd3_acisf10785_pi14-548_cl_sm2.00.img.gz, (641, 249) - (778, 386)
[Thu Sep 29 12:43:36 2011] Writing fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3.gif
[Thu Sep 29 12:43:37 2011] ../../acisf10785/products/events/fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3_src.evt and ../../acisf10785/products/events/fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Sep 29 12:43:37 2011] Size of ../../acisf10785/products/events/fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3_src.evt.gz[events] = 888 counts
[Thu Sep 29 12:43:37 2011] Mean chipx,y = (764.12, 819.97)
[Thu Sep 29 12:43:37 2011] Mean tdetx,y = (4312.03, 3825.12)
[Thu Sep 29 12:43:37 2011] chipx,y range = (738.00-793.00, 791.00-848.00)
[Thu Sep 29 12:43:37 2011] Size of ../../acisf10785/products/events/fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 1297 counts
[Thu Sep 29 12:43:37 2011] ../../acisf10785/products/images/fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3_src.img and ../../acisf10785/products/images/fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Sep 29 12:43:37 2011] ../../acisf10785/products/spectra/fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3_src.pi and ../../acisf10785/products/spectra/fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Sep 29 12:43:40 2011] ../../acisf10785/products/lightcurves/fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3_src.lc and ../../acisf10785/products/lightcurves/fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Sep 29 12:44:29 2011] Keeping rmf generated by specextract
[Thu Sep 29 12:44:29 2011] 194.353
[Thu Sep 29 12:44:34 2011] Updating aperture counts using extracted products
[Thu Sep 29 12:44:34 2011] Error reading totcts from fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Sep 29 12:44:34 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 12:44:34 2011] Using photon index=1.80, rate=0.00892, arf fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3.arf
[Thu Sep 29 12:44:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 12:44:34 2011] Updating source flux to 1.1e-13
[Thu Sep 29 12:44:50 2011] Reading fit data from acisf10785/analysis//spectral/fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3_pl.csv
[Thu Sep 29 12:44:50 2011] Spectral fit parameter nH value = 3.38719e+20
[Thu Sep 29 12:44:50 2011] Spectral fit parameter PhoIndex value = 1.95347
[Thu Sep 29 12:44:50 2011] Failed to get F(0.3-8.0) from acisf10785/analysis//spectral/fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Sep 29 12:44:50 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 12:44:50 2011] Using Nh = 3.4e+20, photon index=1.95, rate=0.00892, arf fullrun_ccd3_acisf10785_pi14-548_pass1_cl_src3.arf
[Thu Sep 29 12:44:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 12:44:50 2011] Updating source flux to 1e-13